Changes:
* Two columns of search fields into one
* moves targets from below search fields to the right of them
To test:
* Create a basket in acquisitions
* attempt to add a record to the order from an external source
* note the changes to the layout
* complete a couple of additions to the basket - functionality should be unchanged.
If you like the changes, sign off :)
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Ok. Consistency welcomed!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch rearranges the layout of the z39.50 search pages in cataloguing and
authorities. There should be no functional change to z-target searching, all
functions should remain the same.
Changes:
* 2 columns of search fields condensed into one
* zTargets moved from below the search fields to beside them
* rearranged search fields into perceived frequency of usage, from most used to
least
* changed label of Raw (any) to Keyword (any)
To test:
* click cataloguing -> new from z39.50/SRU
* observe how the layout has changed
* import a record or two using the search - there has been no change to the
function, it should all be working.
* Click Authorities -> new from z39.50
* observe how the layout has changed
* import an authority or two using the search - there has been no change to the
function, it should all be working.
* sign off if you think these changes are nice. Comments and suggestions are
also welcome regarding this change.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Nice evolution of the z3950 search/result pages.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes the string "Are you sure you want to delete this
authority?" translatable using the function _(...)
To test, apply patch and check that deleting authorities still works.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested successfully with the following procedure:
1. Applied the patch.
2. Ran perl translate update de-DE
3. Edited de-DE-i-staff-t-prog-v-3006000.po to add a "translation"
4. Removed "#, fuzzy" marker from po entry.
5. perl translate -v install de-DE
6. Testing deleting an authority from the authority search results page
and from the detail page. My translated string appeared correctly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If items are created for a serial subscription, the issue
information is shown on the details page in staff with the
planned date in ().
To test:
1) Create a subscription with items added on receive
2) Receive a few issues and create items
3) Check the staff detail page
4) Verify that the published date shows under Publication details
in the items table, but that the date is not formatted
5) Apply patch
6) Verify the date is now formatted according to the DateFormat
system preference setting
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the publisher information out of its own
always empty column into the Summary column below the title,
as it is on other acq pages.
The information was never displaying, as publishercode is in
biblioitems and that table was not selected by GetInvoiceDetails.
Also modified the code to take into account that UNIMARC uses
biblioitems.publicationyear and MARC21/NORMARC use bibio.copyrightdate
for the copyright year.
To test:
- create an invoice for records that
- have a publication year
- have no publication year
- have a publisher...
- 'finish receiving' and check the invoice summary page
...acqui/invoice.pl?invoiceid=?
- Make sure all the information displays now but didn't witout the patch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
1/ Add a new suggestion, put some values for the price
2/ View the suggestion in the staff interface
2/ Switch the currency format
3/ Notice the format of the price does not change
4/ Apply patch
5/ Notice now the syspref is respected
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
In staff client, go to Home > Patrons
Click button "New patron" and choose a category
Change Patron messaging preferences
Now change Category
Make sure that following message box still appears: "Change messaging
preferences to default for this category?"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a bug on the system preferences tab templates.
To test:
To reproduce:
(1)
- Choose a tab on the sysprefs section (for example 'Enhanced Content')
- Right click on 'Enhanced Content preferences' title, and choose to 'inspect' the code
=> FAIL: you will see below the form tag something like:
<input type="hidden" name="op" value="save">
<input type="hidden" name="tab" value="">
(2)
- Do a syspref search (for example 'facet').
- Right click on one of the category titles (for example 'OPAC preferences')
=> FAIL: you will see below the form tag something like:
<input type="hidden" name="op" value="save">
<input type="hidden" name="tab" value="HASH(0x6e53050)">
- Apply the patch
- Repeat (1) and (2)
=> SUCCESS: you will see below the form tag something like:
<input type="hidden" name="tab" value="enhanced_content">
and
<input type="hidden" name="tab" value="opac">
respectively.
- Sign off :-D
Regards
Signed-off-by: wajasu <matted@34813.mypacks.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The name of the patron who has overdues is displayed as
"surname first name" instead of "surname, first name".
To test:
- Go to circulation > overdues
- Verify that first name and surname are not separated by comma
- Apply patch
- Verify the display is improved with a comma
- Delete the first name from one of the patrons
- Verify display is still ok
Signed-off-by: David Roberts <david.roberts@ptfs-europe.com>
Signed-off-by: Christopher Brannon <cbrannon@debian.localdomain>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch encloses the the syspref description/values mix in a <div>.
It doesn't introduce any regression on other browsers (like Firefox) and
has the side effect to make Chrome render the highlighted words on
syspref searches well.
This alternate patch uses a <div> instead of a <span> because it will
sometimes contain block-level elements. Follow the same plan:
To test:
- Search for 'facet' on the sysprefs
=> FAIL: verify it has styling problems in Chrome
- Apply the patch, reload
=> SUCCESS: styling is correct
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Depending on the content of an html notice, it can cause the notice to
either not be collapsible, be uncollapsible, or to be permanently
collapsed.
Test Plan:
1) Set your CHECKOUT notice to the following ( with HTML Message checked ) :
<p>The following items have been checked out:</p>
----
<blockquote> <<biblio.title>> </blockquote>
----
<p>Thank you for visiting the <<branches.branchname>> of HMCPL.</p>
2) Check out some items to a patron
3) View the patrn's notices
4) Note the notice viewer is broken ( message is not collapsed, and
con't be collapsed ).
5) Apply this patch
6) Reload the page
7) Note the notice viewer is no longer broken
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This patch appears to fix the problem with the minimum required change.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These parameters are never used.
GetBookSeller takes a string (bookseller name) in parameter, not an id!
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This case (preview=1) never appened. This patch remove all occurrences
in the pl and the tt files.
Test plan:
Verify you don't manage to find a place where preview is set to 1 on the
claim serials page.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The aqbooksellers.gstreg is never used in the code.
This patch does not remove the DB field but 3 useless occurrences in the
neworderempty page.
The both variable applygst and gstreg have never been took into account for prices calculation.
Test plan:
Verify there is no difference before and after the patch in the prices
calculation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch could have only been
- name => $values[0]->{name},
+ name => $letter->{name},
Other changes are just indentation and variable names (send an hashref
$letter to the template and use the Branches TT plugin to display the
branch name)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The work from KnowledgeWare Technologies need to be
added to about page.
To test:
1) Apply the patch
2) Go to About page > Translations
3) Credits for Arabic must show updated information
(agreed between involved parties)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
They all agreed on the attribution.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Whenever a librarian is prompted with a form during the checking process
( hold to fill, transfer, etc ) the date to backdate returns to is forgotten!
Test Plan:
1) Begin returning items with a remembered backdate
2) Check in an item that need transfered or has a hold
3) Complete the action requested
4) Note your set return date is now lost
5) Apply this patch
6) Repeat steps 1-3
7) Note your backdate is now remembered!
Signed-off-by: Sean McGarvey <smcgarvey@pascocountyfl.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The "Override renewal limit" checkbox no longer works to un-hide the
renewal checkboxes in the table of checkouts. I assume this is because
the script works in such a way that it is looking for the checkboxes
before they are part of the document.
Test Plan:
1) Apply this patch
2) Check the "Override renewal limit" checkbox
3) Note the checkbox now appears
Note, this change allows the "X of Y renewals remaining" to be displayed
for non-renewable items. I left this as it is for two reasons: 1) it
gives the librarian more information that may be useful, and 2) it looks
nicer and more uniform.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm the bug and the solution.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, works as described.
Exception: on-site checkouts can't be renewed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Titles with diacritics don't show correctly
on the 'pay fines' page in the patron account
in staff.
To test:
- Catalog or find a record with non-latin script
Something like a word in Hebrew would work.
- Create a fine entry for that record
Something like a rental fee works.
- Verify that the title doesn't display correct
on the pay fine page (other tabs are ok)
- Apply patch
- Check the pages again - display should be
correct now.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When an item is renewed from the checkouts table, the new due date is
displayed in the renewal column, but the old date due is still displayed
in the due date column. This should be updated as well.
Test Plan:
1) Apply this patch
2) Renew an item from the checkouts table
3) Note the date due is updated in the "Due date" column
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well in my test. My librarians will be grateful for the fix
-- they were complaining about this bug.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When you search for serials in the Serials module the results table is
often too wide for the screen (depending on your browser window size).
This is partly due to the fixed width of the search fields in the table
footer.
This patch applies a flexible width to those <input>s and reduces the
font size of their text.
This patch also moves the "action" links for each table row into an
"action" menu (similar to the change made by Bug 10615 in Reports) to
further conserve screen space.
This patch also revises the page's DataTables configuration to use table
header classes for sorting configuration.
To test you should be able to perform a search which returns multiple
open and closed subscriptions.
- Test that table sorting works correctly, including for titles with
articles and for dates.
- Test that the Action menu items work correctly and that they correctly
reflect the permissions of the logged-in user with regard to
receive_serials and routing.
- Perform these tests on both the "Open" and "Closed" tabs.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and improves the display significantly.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 2546 removes the description DB field value in some case (3.15.00.003).
But the receipt generated by scripts members/printfeercpt.pl and
members/printinvoice.pl displays this field.
When the description field is empty, the default value (based on
accountlines.accounttype) should be displayed.
Test plan:
- Generate and pay some different kinds of fees for a patron without
filling the 'description' field.
- In Fines>Account, click on the 'print' link.
- Before this patch, the "description of charges" values is empty if no
description was given.
It is a regression introduced by bug 2546, a default value was
inserted in the description field depending on the account type
selected.
- After this patch, the "description of charges" values should be based
on the account type. The string display on printing receipt should be
the same as on the account screen (staff and opac).
Note for QA: If removed the "payment" key, it is not used in template
and generated a warning ("odd number of elements...").
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This fixes the display of payments and other charges on the
fines slip.
Note: This patch fixes a line where the description in the
database was still updated to say "Payment thanks" for partial
payments. It might be worth to do a follow-up correcting the
accountlines table and removing the unwanted comment (see bug 2546).
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The label batches editor has always sorted by the order the items were
added to a batch. However, it is now sorting by title. This should be
remedied.
Test Plan:
1) Create a label batch
2) Note the items are in order of title ( summary )
3) Apply this patch
4) Refresh the page, not the items are now sorted by label number
Tiny patch. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The checkbox and "edit" column in the table of holdings on the
staff client detail page should be excluded from sorting since there is
no useful data to sort. This patch does so.
To test, view the detail page for a title which has multiple items.
Confirm that sorting works correctly.
Test under the following conditions:
- with the StaffDetailItemSelection system preference enabled and
disabled.
- as users who do and do not have cataloging item edit privileges
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as desrcibed, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When adding a duplicated patron record some fields are prepopulated from
the original patron record. Focusing your cursor on these fields
automatically clears them. This works well if you assume that the user
only focuses on fields which should be changed. This works badly if you
consider that a user might want to tab between all fields. I think the
disadvantages outweigh the minor benefit of not having to delete the
contents of a field.
This patch removes the clearing action.
TEST PLAN
---------
1) Log in to staff client
2) Patrons
3) Find an existing patron
4) Click on the link in the Name column
5) Click on the Duplicate button
6) Click on fields with data in them.
-- they will clear, which is more problematic than correcting
the entry.
7) On the line
"Home > Patrons > {patron name} > Duplicate Adult Patron"
click the patron name to go back.
8) Click on the Duplicate button
9) Tab through the fields
-- the fields should remain unchanged, but sadly they clear.
10) Apply the patch
11) On the line
"Home > Patrons > {patron name} > Duplicate Adult Patron"
click the patron name to go back.
12) Click on the Duplicate button
13) Navigate through the fields
-- tabbing nor clicking should clear any fields.
14) Run koha qa tests
NOTE: Had to rebase again. Yes, bug 7878 interfered.
However, it deals with comment #6, which Owen
appropriately noted.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Less surprises, improves accessibility by enabling to
tab through the form without losing data.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch to follow that adds 3 new system preferences to control the
parameters for the longoverdue script.
New prefs are DefaultLongOverdueChargeValue, DefaultLongOverdueLostValue
and DefaultLongOverdueDays.
These preferences are used when you call the longoverdue.pl script without
their parameters.
Sponsored-By: CCSR
Signed-off-by: Leila and Fridos help <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently only the suggestion manager can order from accepted
suggestion.
This patch set to default the ability to show all suggestions when
ordering from a suggestion.
2 links "show only mine" and "show all" permits to filter/show all
permissions.
Test plan:
Create an order from a suggestion and verify you are able to see all
suggestions by default.
Verify the "show only mine" link works as expected.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For some libraries, the current information specified in the patron
results when search for a patron to place hold is insufficient. These
libraries would like the branchcode to be added to the results to help
identify the correct patron.
Test Plan:
1) Apply this patch
2) Browse to the holds for a record
3) Search for patrons from the record holds screen
4) Note the patron results now have the branchcode after the patron type
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I introduced this bug with my patch for Bug 8181. In changing the way
the date picker widgets worked I changed the ID the "clear date"
javascript was looking for, so it stopped working.
This patch corrects it and improves the JavaScript by moving it out of
the HTML markup.
This patch also makes some minor HTML validity corrections: escaping
ampersands and removing a "size" attribute from a hidden form field.
To test, you should have the AllowHoldDateInFuture system preference
enabled. Place a hold in the staff client for a patron and confirm that
you can choose a "hold starts on" date and a "hold expires on" date and
that the respective "clear date" links work correctly for each one.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Both of these 2 values should not be modified by the user.
Since these values depend on the discount and the quantity.
Test plan:
Verify you cannot modify the budgeted cost and the total price on
creating/modifying an order.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In inventory results, CSV or screen, the item withdrawn information is missing.
This information can be usefull to understand why an item was not scanned.
Test plan :
- Check you have in default framework an item subfield mapped with items.withdrawn
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and withdrawn=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and withdrawn=1
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Submit
=> You see a column 'Withdrawn' with withdrawn value
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Export to CSV file'
- Submit
- Open exported file
=> You see a column 'Withdrawn' with withdrawn value
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce this bug:
- Create a patron attribute type and limit it by patron category
- Create a new patron with that category
- Observe that there is no entry field for the patron attribute type you
created for that patron category. Inspecting the source should show
that the entry field has been hidden.
The patron entry form tries to hide patron attribute type input fields
based on the currently selected patron category. It does this based on
the value of $("categorycode"). However, instead of pulling the data
from the categorycode input in the body of the entry form, it pulls it
from the patron search box at the top of the page. The value of that
input is always empty because no category is preselected.
This patch corrects the problem by changing the ID of the categorycode
<select> in the body of the entry form and making corresponding changes
to the JavaScript which depends on it.
To test, apply the patch and load the patron entry form for a patron
category to which a patron attribute type has been limited. That patron
attribute entry field should appear correctly.
Choose a different patron category from the "Category" dropdown. Confirm
that the patron attribute entry field has been hidden.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies the configuration of the staff client cart table
sorting to enable title sorting to ignore articles. Other column sorting
configuration settings are revised to use table header classes instead
of indexes.
To test, add multiple titles to the staff client cart, choosing several
titles which begin with articles ("a," "an," or "the" in English). View
the cart and test sorting of all columns. Sorting by title should sort
correctly while ignoring articles. Other columns should sort correctly
too.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The MARC preview available on the staff client detail page doesn't wrap
long lines of text because it uses a huge block of whitespace-formatted
text in a <pre> tag. The OPAC doesn't have this problem because the MARC
preview is formated in a table.
This patch copies the OPAC's "plainMARC.xsl" file for use in the staff
client. The preview modal has been converted to use Bootstrap following
the method used in Bug 12755
To test, apply the patch and clear your browser cache. View the
detail page for a bibliographic record in the staff client. Click the
link to show the MARC preview. Confirm that the modal looks correct,
works correctly, and adapts gracefully to different browser widths.
Confirm that the MARC preview and Card links still work from Z39.50
searches.
Note: This patch assumes that UNIMARC records display correctly using
xslt/plainMARC.xsl. Please let me know if that is wrong.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm it works: nice modal dialog box; display aligned on opac display;
works also with Unimarc biblios.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In the template of the export tools, the value 'marc' is set for
the 'format' variable.
It should be 'iso2709'.
There was a mess in the tools/export.pl script.
2 variables did the same thing: $format and $output_format
This patch fixes that replacing $format with $output_format
Test plan:
Try to export biblio in iso2709 and csv using the export tools and from
the checkout list.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Before applying the patch, attemping an MARC export from tools/export.pl
resulted in an error. After the patch the export works correctly.
Exports from the checkouts page also work correctly.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. Also tested authority export.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The suggestion date filters appear to be picking up a style change which
wasn't anticipated for the suggestions page markup. This patch solves
the problem by simplifying and standardizing the markup, including
simplifications to the label structure.
To test, apply the patch and view the suggestions management page in the
staff client. Expand the "suggestion information" filter section and
confirm that the label/input structure looks correct and works
correctly.
Signed-off-by: Blou <philippe.blouin@inlibro.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, looking better.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since bug 12986 has been pushed, the tabs don't filter correctly the
table on the saved report list (reports/guided_reports.pl?phase=Use
saved
Test plan:
Go on Reports > Guided reports wizard > Saved reports
Verify the tabs work as expected.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed problem and that the patch fixes it, passes tests
and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without the previous patch, when you edited a patron, the "N/A" value
was selected for sex.
With, no checkboxes were selected.
This patch also replaces the
IF opduplicate do nothing ELSE do something END
statement with
UNLESS opduplicate do something END
which is more readable.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When duplicating a patron the resulting entry form contains the data
from the original patron in the following fields: Other names, Initials,
Gender, OPAC note, Staff note, and expiration date. These should be
blank for a new duplicated patron. This patch corrects this.
To test, locate or create a patron record which contains data in the
fields listed above. Duplicate that patron and confirm that those fields
are blank in the resulting patron entry form.
Confirm also that editing an existing patron with data in those fields
works correctly.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If no order is selected on the acq claim page when clicking
'Claim order' an ugly perl error message is displayed.
This patch corrects the behaviour to display a human readable
'No order selected'
instead.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reworded commit message to reflect what the patch achieves.
Works as described and passes tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the budget name to the page heading when editing a
budget. The patch also similarly corrects the page title during edit
operations and fixes some inconsistency in the breadcrumbs.
To test, edit an existing budget (Adminitration -> Budgets) and confirm
that page title, breadcrumbs, and heading look correct.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Nice improvement, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a better check in message for patrons with indefinite restriction.
To test:
Check out an item to a patron.
Add a manual restriction without expiry date to that patron.
Check in the item.
Without patch, the checkin message reads:
Reminder: Patron was earlier restricted until 9999-12-31
Apply patch and repeat steps above.
The message should now read:
Reminder: Patron has a restriction (no expiry date)
NOTE: Changed wording at two places following Owen's suggestion. New: "Patron
has an indefinite restriction"
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Thanks Marc for catching this case. I was thinking like you that the wording
sounded strange while playing with bug 13242. Merge the original patch and the
followup, containing a better wording, thanks to Owen comment.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The document.write in a td seems to brake the page with a new version of
DataTables.
This patch replaces a dirty piece of code with another one (but this one
works...)
Test plan:
Create repeatable holidays and verify the page loads correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works to fix the problem. The code is definitely an improvement.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, fixes critical problem.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked the names with git log and Bugzilla.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the vendor search results page if some cells contain textual data the
"item count" and "biblio count" columns will sort incorrectly. This
patch sets an explicit numeric sort on these columns. In doing so this
patch also changes the existing column sorting configuration to use
table header cell classes instead of sorting based on index.
This patch also corrects two instances of unescaped ampersands.
To test, search for a vendor which has multiple baskets, at least one of
which should contain canceled orders. Confirm that sorting by item
count, biblio count, date, and closed all work correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have not been able to see the sorting problem, but the
patch causes no regression and everything seems to work nicely.
Passes QA script and tests.
http://bugs.koha-community.org/show_bug.cgi?id=12039
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch slightly alters the padding on <input> and <textarea> so that
the cursor is more visible.
To test, apply the patch and clear your browser cache. View a variety of
pages in the staff client and confirm that the change does not adversely
affect the display of forms.
Small change that enhances user experience.
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, small CSS change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Makes the status column display "Overdue!" if overdue
* Fixes the due date formatting
* Sorts the checkouts by date due ( oldest to newest )
Note: I found no evidence that this data was previously sorted,
so I kept it simple. Sorting based on system preferences could
be a future enhancement.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This fixes the issues described for patrons with existing checkouts.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A patron's print summary should contain a list of checked out items
as it did in 3.16.2 and earlier.
Please note, as of 3.16.2 reserves were no longer part of the print
summary and thus are not part of this bug fixing patch.
Test Plan:
1) Find a patron with checked out items
2) Choose Print -> Print summary
3) Note the lack of a list of checkouts
4) Apply this patch
5) Reload the page
5) Print the summary again
6) Note the list of checkouts
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, apart from the missing status information
that Owen already noted on the bug.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The 'show_actual' variable is not correctly manage in the template.
This has certainly been introduced by the migration to TT.
Test plan:
1/ Go on a bugdet planning view (admin/aqplan.pl)
2/ Check the "Show actual/estimated values" checkbox on the left
(Filters box)
3/ Go
4/ Verify the actual values are now displayed (i.e. the columns contain
2 values).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Another regression caused by Bug 11703: The list of checkouts on the
circulation and patron detail page shows item type codes instead of the
full description.
Test Plan:
1) View a patron's checkouts, note the Item type column displays the
code rather than the description.
2) Apply this patch
3) Refresh the page, note the description is now displayed
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as described.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before Bug 11703, overdue items in the list of a patrons checkouts had
the renewal checkbox preselected so that librarians could quickly renew
only those items which required it. This is not longer the case.
This patch corrects it. To test, apply the patch and clear your browser
cache. Check out to a patron who has overdues and confirm that the
overdue items have the "renew" checkbox preselected. Check that items
which are not overdue are not preselected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies the way the checkouts script sets the "Always show
checkouts" cookie so that it is set with an explicit expiration date
(+365 days). This will allow the cookie to persist across browser
sesssions.
To test, apply the patch and clear your browser cookies to start with a
clean slate.
- Check out to a patron who has existing checkouts. Their checkouts
should not load by default.
- Check the "Always show checkouts immediately" checkbox.
- Close your browser.
- Reopen your browser and check out to that patron again. Checkouts
should now be displayed by default.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as described. I confirm that without this patch, the un-persistance of
"show checkouts" choice is very perturbing for librarians coming from previous
version of Koha.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In some cases (eg. when Staf Client Search is active), when user choose
Edit->Delete record on record tool bar, browser don't wait for
confirmation and goes immediately to delete record.
To reproduce:
1. Search for some biblio records and choose one without items attached.
2. Note that there, must be "Return to search results" box on left side,
bug works in that case, when in normal view everything work fine.
3. Click Edit->Delete record, watch that confirmation box shows, but
don't wait for OK and runs immediately. If you are fast enough to
click OK, then you get error as below, because record was deleted
earlier.
To test:
1. Apply patch.
2. Follow reproduce steps.
3. Check if waits for confirmation in all cases.
4. Check if deletes record after confirm.
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed the problem and that the patch fixes it.
Good catch!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removes note about Display856uAsImage not working on
the OPAC result page.
To test:
- catalog a record with 856$u = URL to an image, $q = img
- turn on the system preference Display856uAsImage
- check that the pref description makes sense and is correct
- the warning about the pref not working on result pages
has been removed
- make sure your record has been reindexed by Zebra
- verifiy the image indeed displays on the result page
in the bootstrap catalog.
Note: The height=100 doesn't work in the Boostrap catalog,
so the images display in their original size. Will file
a separate bug for this.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch udpates the checkouts JavaScript so that clicking the "show
checkouts" button or the "always show checkouts" checkbox returns focus
to the barcode field. This improves the checkout workflow by eliminating
a mouse click.
To test, apply the patch and clear your browser cache. Check out to a
patron and confirm that focus is returned to the barcode field after
clicking the "show checkouts" button and the "always show checkouts"
checkbox.
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When using the longoverdue script it's possible that items marked lost
remain on the patron account. I think it's important for staff to see
that some items are marked lost - currently the list of checkouts
doesn't show any sign of the lost status.
Test Plan:
1) Find a patron with a checked out lost item
2) Note the lost status is not displayed in the checkouts table
3) Apply this patch
4) Refresh the page, note the lost status now displays
5) Repeat this test plan for a damaged item
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested successfully with damaged and multiple lost values.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In Koha 3.14 and earlier, an item on hold and in transit would display
the date the item was transferred. This is missing from the new ajax
holds table.
Test Plan:
1) Place an item on hold for delivery at a different library
2) Check the item in, confirm the hold and transfer
3) View the patron's holds tab on circulation.pl and/or moremember.pl
4) Note the item is show as in transit, but does not give the "since"
date
5) Apply this patch
6) Note the in transit status now has a "since <date>"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small change, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Typo error found in the new template itemsearch.tt line 363 "_ matches
only a single charcter"
Test plan:
1) Go to url 'intranet-tmpl/prog/en/modules/catalogue/itemsearch.tt'
line 363 and check the typo "_ matches only a single charcter" and
change for _ matches only a single character
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When the user selects a patron search by birth date a tooltip is
supposed to appear showing the date format requirement. Bug 9811 (Patron
search improvement) changed the ID on which the tooltip depended to
function. This patch corrects it.
To test, apply the patch and go to the Patrons home page in the staff
client. In the header search form select "Date of birth" from the
"search fields" dropdown. This should trigger a tooltip showing the
required date format.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I confirm the tooltip comeback with this patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As per the discussion, a prompt on a hard coded soft-limit is
far more acceptable as a solution.
TEST PLAN
---------
0) Back up your DB. -- because a backup is always good!
1) Log in to staff client
2) Navigate to any biblio details
(e.g. cgi-bin/koha/catalogue/detail.pl?biblionumber=#####)
3) Click the 'Edit' dropdown button.
4) Click 'Edit items'.
5) Click 'Add multiple items'
6) Enter a crazy high number (e.g. 999)
7) Click 'Add'
-- Koha just adds it! YIKES!
8) Apply patch
9) Repeat steps 5-7
10) Click 'Cancel'
-- Koha does not add the items.
11) Repeat steps 5-7
12) Click 'Ok'
-- Koha does add the items.
13) run koha QA test tools
14) Restore your DB.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
- add/edit an action on the marc modification templates tools
- choose an action and define a condition
- define the source field as same as the condition field
- verify the All/1st dropdown list is changed to Every/1st
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nicole suggested a change of the note, that this patch is implementing:
NOTE: If you change an authorized value code, existing records
using it won't be updated. Changes to value descriptions will show
immediately.
To test:
- Go to administration > authorised values
- Check the note showing on the page
- Select a category from the pull down and edit an existing entry
- Check the note on this page is also correct
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Create or find an open basket/order in the acquisition module
- Check that "Branch" now reads "library"
- Set to "no library"
- No branches should be seen there.
Signed-off-by: jeremie.benarros <jeremie.benarros@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When creating an invoice which has a duplicated number, if the user chooses to 'Create new invoice anyway', previously entered shipment date (todays date by default) is not being saved, because the date value is passed to the script in the wrong format (acqui/parcels.pl expects shipmentdate parameter to be in the system-configured date format, but what it's getting in such cases is ISO-formatted date instead). As a consequence (when receiving orders from invoice whith empty shipment date) 'datereceived' field in order records are also not being populated. Here and there, Koha is using datereceived field to establish if the order was received or not received, so such not-quite-complete orders:
- can be cancelled from the basket (even when they are de facto already received),
- it's not possible to cancel receipt of those orders from the invoice (because Koha is considering them as not yet received).
To reproduce:
1) Make sure you have some system date format configured in your test environment which is different from ISO format (e.g., DD/MM/YYYY) and the AcqWarnOnDuplicateInvoice syspref is enabled
2) Create some invoice with e.g. '11111' number,
3) Create another invoice with the same number (using 'Create new invoice anyway' button)
4) Try to create yet another invoice with the same number; observe that already existing invoice created in step 3) does have empty shipment date.
5) Optional: create some orders and receive them from the invoice with empty shipment date; observe that such orders are not being treated as received in all places (e.g. it's not possible to cancel receipts of such orders, and the message displayed is not in any way helpfull to determine why not).
To test:
1) Apply patch
2) Retest
3) Ensure that the issue is no longer reproductible, and that there are no apparent regressions of any kind.
Signed-off-by: simith <simith@inlibro.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tiny change fixing a bad bug. No problems found, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Add or edit a new or existing subscription in the serials
module
Patch changes "biblio" to "record" and fixes capitalization:
Search for record | Create record
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As requestedby people testing the patch, I add references to the new
xslt files on the Z39.50/SRU servers help.
Example usages are also provided.
Test:
- Apply the patch
- Go to the help page on the 'Z39.50/SRU Servers' page
=> SUCCESS: Notice there's a section documenting XSLT file(s) usage
and provides some examples that cover the introduced files.
- Sign off
Thanks
Tomas
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Help page does shed some light to the XSLT usage. Enough to my taste.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the following sample files:
- Del952.xsl
- Del995.xsl
- Del9LinksExcept952.xsl
- Del9LinksExcept995.xsl
Thay can be used on the new SRU/Z39.50 XSLT processing feature. At the same
time they can be used to solve this bug.
To test:
- Have an SRU/Z39.50 target configured
- Have a search that returns at least a record with the following
properties:
* It contains $9 links
* It contains items (952 or 995 fields in MARC21/NORMARC and UNIMARC respectively).
MARC21/NORMARC test:
- Do a Z39.50/SRU cataloguing search that retrieves the desired record
- Verify it includes $9 and 952 field(s) by clicking on the MARC link
- Edit your Z39.50 target and add Del952.xsl to the "XSLT File(s) for transforming results:" field
- Re-run the search
=> SUCCESS: the MARC view of the imported record doesn't contain the 952 field
- Edit your Z39.50 target and add Del9LinksExcept952.xsl to the "XSLT File(s) for transforming results:" field
- Re-run the search
=> SUCCESS: the MARC view contains the 952 field (including the $9 subfield), and
all other $9 subfields have been removed
- Edit your Z39.50 target and add
Del952.xsl, Del9LinksExcept952.xsl
to the "XSLT File(s) for transforming results:" field (both, comma separated)
- Re-run the search
=> SUCCESS: the MARC view doesn't contain $9 subfields nor items.
- Repeat for UNIMARC, replacing 952 for 995.
- Sign off :-D
Regards
Tomas
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested under MARC21. Works fine. (Additionally verified 995 with xsltproc.)
As noted on Bugzilla, we could still improve documentation but imo no need
to block these example transformations.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I can't resist to put my own signature on this patch, confirming it works as
described with z39.50 Unimarc targets.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the new checkouts page there is some padding above the checkouts,
relatives' checkouts, and holds tables caused by extra markup in the
table's sDom configuration (http://legacy.datatables.net/ref#sDom):
<'row-fluid'<'span6'><'span6'>r>t<'row-fluid'>t
This creates several empty <div>s which don't serve any purpose. This
patch simplifies it to:
rt
To test, apply the patch, clear your browser cache, and check out to a
patron who has items checked out, holds on their account, and child
records attached which also have checkouts.
The padding above the table of checkouts, the table of relatives'
checkouts, and the table of holds should match that on the sides.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Checked per plan on both Check Out and Details pages, spacing appears correct.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch add template modifications for the restrictions:
- the source field is always mandatory
- on move and copy, the source and destination subfield should be both
filled or blank.
- on move and copy, the destination subfield should be filled.
- on update, the subfield value should be filled.
Test plan:
Verify you are not able to create/modify template actions according to
these restrictions.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current holds behavior in Koha allows a situation like this:
- Patron A has an item currently checked out.
- Patron B places a hold on the next available copy of that title.
- Then Patron A will not be able to renew his item, even if there are
other available copies of that title that could potentially fill Patron
B's hold.
Since this seems unfair to Patron A, we should allow renewal of items
even if there are unfilled holds, but those holds could all be filled
with currently available items.
Test Plan:
1) Apply this patch
2) Create a record with two items
3) Check out the item to a patron
4) Place a hold on the record
5) Note you cannot renew the item for the patron
6) Enable the new system preference AllowRenewalIfOtherItemsAvailable
7) Note you can now renew the item, as all the holds can be satisfied
by available items.
8) Place a second hold on the record
9) Note you can no longer renew the item, as all the holds *cannot*
be filled by currently available items
Signed-off-by: Holger Meissner <h.meissner.82@web.de>
Signed-off-by: Chris Rohde <crohde@roseville.ca.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the way CanBookBeReserved() and CanItemBeReserved() return error
messages and how they are dealt with in the templates. This change makes it possible
to distinguish between different types of reservation failure.
Currently only two types of errors are handled, all the way to the user, from the CanItemBeReserved():
-ageRestricted
-tooManyReserves which translates to maxreserves
#############
- TEST PLAN -
#############
((-- AGE RESTRICTION --))
STAFF CLIENT
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Place a hold for the underage Borrower for the ageRestricted Record.
4. You get a notification, that placing a hold on ageRestricted material is
forbidden. (previously you just got a notification about maximum amount of reserves reached)
((-- MAXIMUM RESERVES REACHED --))
0. Set the maxreserves -syspref to 3 (or any low value)
STAFF CLIENT AND OPAC
1. Make a ton of reserves for one borrower.
2. Observe the notification about maximum reserves reached blocking your reservations.
((-- MULTIPLE HOLDS STAFF CLIENT --))
3. Observe the error notification "Cannot place hold on some items"
((-- MULTIPLE HOLDS OPAC --))
1. Make a search with many results, of which atleast one is age restricted to the current borrower.
2. Select few results and "Place hold" from to result summary header element.
(Not individual results "Place hold")
3. Observe individual Biblios getting the "age restricted"-notification, where others can be
reserved just fine.
Updated the unit tests to match the new method return values.
t/db_dependent/Holds.t & Reserves.t
Followed test plan. Works as expected and displays meaningful messages for the reason why placing a hold is not possible.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up corrects some of the QA issues affecting the other patch,
as well as changing the way the "filter" option is displayed:
- Added the use of the DataTables include file
- Removed redundant document.ready
- Fixed single quotes
- Fixed default sort (should be date descending to match the current
functionality)
- Adding missing <tr>
- Converted filter button to a link
The last change is a judgement call, but the button in the DataTables
toolbar looked awkward and caused ugly wrapping at narrower viewport
sizes. I think a link is more keeping with the pattern established by
"select all / clear all" links.
To test, apply both patches and view the account page
(members/boraccount.pl) for a patron who has paid and unpaid fines (the
more the better).
- Confirm that the default sort is by date descending.
- Confirm that DataTables controls (paging, search, result count) work
correctly.
- Confirm that clicking the "Filter paid transactions" link works
correctly to toggle display of paid transactions.
Works as expected. Passed koha-qa.pl.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, no problems found.
Passes QA script and tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test steps :
* Create a few manual invoices with fines.
* Pay a fine.
* Go back to the account tab.
* Try the "Filter paid transactions" button. It should filter everything with 0.00 in the Outstanding column.
* Try the "Show all transactions" button.
* Play around with the buttons
Followed test steps. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
inactive and active are not defined anymore. They should be removed. The
filter is done with DataTables.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note that bug 12984 changes the view of this table.
On the acqui-home page, the total was not updated.
With this patch, the footer (totals) will be updated on filtering rows.
Test plan:
1/ Go on the acqui home page.
2/ Verify the totals are correct.
3/ Filter the table using the filter input and verify the totals are
updated with the rows shown.
4/ Hide/Show inactive budgets and verify the totals are still corrects.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11578 improved the funds list view in the administration module.
It would be great to have the same improvement on the acquisition
home page.
This improvement groups funds by budget and displays them with a
hierarchy.
Test plan:
0/ Create a budget and fund hierarchy, with active and inactive budgets.
1/ Go on the acquisition home page and verify the values are the same as
before
2/ Verify the funds are correctly listed
3/ Verify the links on top of table work (expand/collapse all, show/hide
inactive budgets).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the budget list view, the total was not updated.
With this patch, the footer (totals) will be updated on filtering rows.
Test plan:
To test with both CurrencyFormat pref values.
1/ Go on the budget list view
2/ Verify the totals are correct.
3/ Filter the table using the filter input and verify the totals are
updated with the rows shown
4/ Hide/Show inactive budgets and verify the totals are still corrects.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In working on bug 10480, I noticed that these plugins needed some attention:
[2] unimarc_field_123i.pl: added missing template
[3] unimarc_field_123j.pl: resolved missing template with same file
[4] unimarc_field_210c_bis.pl: removed a warn, corrected some POD lines
Note about UNIMARC field 123i and 123j: Subfields $i and $j are each 8
characters long and contain the same components as subfields $f and $g
except that character position 0 contains a plus sign (for the northern
celestial hemisphere) or a minus sign (for the southern celestial hemisphere).
Test plan:
Connect unimarc_field_123i and 123j to some field.
Look especially at changing + or - for the hemisphere in the popup.
Check left-padding with zeroes for the other positions.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Checked plugin in a UNIMARC installation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This bug adds a new preference, "SubfieldsToAllowForRestrictedEdition,"
but the use of the term "Edition" in this context is incorrect. I think
it would be more clear to change the preference name to
"SubfieldsToAllowForRestrictedEditing." This patch makes this change.
I realize this isn't a big issue since the preference has a good
description, but I thought that if we were going to make this as clear
as possible now would be the time to do it.
To test, start with a database which hasn't previously been used to test
Bug 7673. Apply all patches and run the database update. Follow the test
plan as described in the bug.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, change appears complete.
All tests and QA script still pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the sysprefs are empty, we assume that the librarian can edit all
subfields, even if s/he has the restricted permission.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
3 permissions:
- edit_items_restricted
- delete_all_items
- items_batchmod_restricted
2 system preferences:
- SubfieldsToAllowForRestrictedEdition
- SubfieldsToAllowForRestrictedBatchmod.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This test had been lost in a rebase.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the following permissions:
- editcatalogue.limited_item_edition: Limit item modification to barcode, status and note
- editcatalogue.delete_all_items: Delete all items at once
- tools.items_limited_batchmod: Limit batch item modification to item status
The SubfieldsToAllowForLimitedEdition syspref is used to define which subfields can be edited
when the editcatalogue.limited_item_edition permission is enabled.
In the same way, the SubfieldsToAllowForLimitedBatchmod is used to define which subfields
can be edited when the tools.items_limited_batchmod permission is enabled.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds links to "My account" and "My checkouts" to drop down in staff client header.
To test:
Apply patch
Got to drop down of logged in user (top right)
See new links to "My account" and "My checkout" (above "Log out")
Test the links.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Works as advertised. The options are not displayed when you are logged
in as the db/admin user.
Added classes "toplinks-myaccount" and "toplink-mycheckouts" to li tags to make it possible to hide them (per Kyle M $
Switching back to "Signd-off" (Hope this is OK becuause it is a tiny string addition)
Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the preparation step for others.
On acqui/acqui-home.pl and admin/aqbudgets.pl, it will be possible to
see the totals in the footer updated with the filtered rows.
Test plan:
This cannot be tested alone, you have to apply it with others (see the
"Blocked" bug reports).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds 2 new sysprefs: OpacAdvSearchOptions and
OpacAdvSearchMoreOptions.
These sysprefs are multivalued and you can add or remove some elements on
the adv search page.
This patch allows to display/hide some entries in the advanced search
page at the OPAC.
On this way, it is possible to configure the search options to display.
Test plan:
1/
Fill OpacAdvSearchOptions with Item types and Languages.
Fill OpacAdvSearchMoreOptions with Item types, Languages and Location.
On the advanced search page, verify the Location is only displayed for
the "More options" view.
2/ Try different settings for these prefs
3/ Remove all entries for the OpacAdvSearchMoreOptions and verify that
the "More options" does not displayed additional options.
4/ Remove all entries for the OpacAdvSearchOptions and verify that the
"normal view" does not displayed any options.
Note that this patch only affects the bootstrap theme.
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new type "multiple" for syspref.
This new type allows to select several values for one syspref.
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes some minor updates to the output of the holds awaiting
pickup report. To test you should have several holds which are marked as
"waiting," including some which have been waiting longer than the number
of days specified in the ReservesMaxPickUpDelay system preference.
- Go to Circulation -> Holds awaiting pickup
- In both the "waiting" and "over" tabs, confirm that titles display any
associated subtitle
- Confirm that library name is shown instead of library code
- Confirm that the patron name mailto: link works correctly
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as described: subtitle displayes (if mapping defined), library name
instead of code, and email as clickable mailto.
Remark 1: As for bug 13083, subtitle display is not as good in UNIMARC than in
MARC21, since subtitle is not separated from title by ':'.
Remark 2: 'subtitle' field is retrieved from a field mapping. Taking a look at
C4::Biblio::GetRecordValue, one see that the fieldmapping is directly queried.
There isn't any caching system, like for frameworks.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. Apply the patch
2. Run updatedatabase.pl
3. Login to Koha and go to Adminstration.
4. Click on Global system preferences.
5. Search GoogleIndicTransliteration and choose value "Show".
6. Apply patches on bug 13144
7. Go to OPAC and see GoogleIndicTransliteration coming on Masthead.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix UNIMARC Card View on Z39.50 result page. The valid XSL was
there: UNIMARC_compact.xml, but were not selected (a regression). This patch
use themelanguage to access XSL file, anticipating a intranet new theme in
future.
TO TEST: Before applying this patch, do a Z39.50 search, and try to display a
biblio record card view: meaningless. Retry after applying this patch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested in a UNIMARC installation, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes several changes to language and markup with one
change in behavior:
- Updated permission description to avoid the use of the term "biblio"
- Updated batch delete template to avoid the use of the term
"biblio" and to improve clarity.
- Replaced instances of terms "issue" and "reserve" with "checkout" and
"hold" respectively.
- On bibliographic record batch delete, wrap biblionumber in <label>.
- On bibliographic record batch delete, show subtitle via Keywords to
MARC mapping.
- On bibliographic record batch delete, respect BiblioDefaultView system
preference.
- In the staff client cart, move batch delete link from "Action" menu
to text link below (alongside "add to list" and "place hold"). The
buttons are actions which affect the whole Cart. The links are actions
which can be applied to selected items. I think this change makes it
more consistent with the kind of operation being performed.
To test:
- Submit a batch of bibliographic records and confirm that the
list of titles shows subtitle data as defined in Keywords to MARC
mapping. Confirm also that the title links respect your
BiblioDefaultView system preference.
- Perform a catalog search, select several titles, and add them to the
Cart. Open the Cart and test the "Batch delete" link with and without
titles selected. Test as a user who lacks batch biblio delete
permission and confirm that the link does not appear.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
I love the rewording, we always translated 'biblio' as 'bibliographic record',
it makes a lot of sense.
Tested using direct input of biblionumber or cart, subtitle display shows
correctly, link respect preference, user without permission cant acces the
tool or links.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Fixes the permission on the tools page
- Fixes some capitalization
- Changes 'Reserves' to 'Holds'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch offers a new tool for deleting records.
Biblios and authorities will can to be deleted with a simple list of
biblionumber or authid.
This feature adds:
- a new pl/tt files tools/batch_delete_records
- a new permission: tools > records_batchdel
Test plan for biblios:
1/ There are two ways to generate a list of biblionumbers:
- using the basket: do a search, add some biblio to your basket, open
the basket and click on the "Action" button > "Delete"
- generating a list from a report
2/ On the "Batch record deletion" tool verify:
- biblios with issues cannot be deleted (checkbox disabled and line in
red).
- information is correct.
- sort functions work on each columns.
- the items, reserves and issues values are correct.
3/ After clicking on the "Delete selected recors" button, verify:
- reserves, items and biblio have successful been deleted.
- if an error occurs, the tool display an error message.
Test plan for authority:
1/ Generate a list of authid using a report:
2/ On the "Batch record deletion" tool verify:
- authorities are display with the summary.
- the count usage (used in X biblios) is correct.
3/ After clicking on the "Delete selected recors" button, verify:
- The authorities have successful been deleted.
- if an error occurs, the tool display an error message.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the system preferences DisplayIconsXSLT and DisplayOPACiconsXSLT we control
the visibility of the material type, format and audience information in staff
and OPAC.
Sometimes a library might only want to hide a part of that information - for
example, hide audience but keep the material type icon.
This patch adds CSS classes to make it easier to style this section of the page
and hide parts of the information.
To test:
- Verify that OPAC and staff result lists for various types of materials
still display nicely.
- Take a look at the HTML and verify, that label and text are now
wrapped into a new span with a results_* class.
- Try hiding a part of the information, for example in OpacUserCSS:
.results_material_type {
display none;
}
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described... but for a missing colon on example CSS
.results_material_type {
display: none;
}
No koha-qa errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When enabling or disabling a OPAC language choice clicking the label
triggers the checkbox under the language preference instead. This is
because both <label>s have the same id.
This patch adds a modifier to each label and corresponding id attribute
in order to make them unique.
To test, go to Administration -> System preferences -> I18N/L10N.
Clicking the "English (en)" label under the "language" system preference
should toggle the corresponding checkbox. Clicking the "English (en)"
label under the "opaclanguages" system preference should toggle the
correct checkbox.
Further tests:
- Install an English 'sub-language' like en-GB and confirm that
checkbox labels work correctly.
- Install a non-English language and confirm that checkbox labels work
correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, template changes only.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tabbing through fields in the patron add form or MARC editor triggers a
JavaScript error for each tab. The cause seems to be some JS which was
designed to accommodate differences between Mozilla browsers and
Internet Explorer. A slight modification seems to work just as well in
Firefox and IE.
To test, apply the patch and clear your browser cache if necessary. To
look for JavaScript errors, open the Developer Tools console in Firefox,
Chrome, or Internet Explorer (or in Firefox's Firebug console).
Create a new patron and use the tab key to move between inputs. No error
should be reported in the console. Test typing in fields and pressing
enter. The form should not be submitted.
Test in all available browsers, including at least IE11, IE10, and IE9.
Reproduced with FF 32
Tested with FF 32, Chrome 38, IE 11 and IE Emulations 8,9,10
No JavaScript errors found. Enter does not submit.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested in Chromium, confirmed the problem and that the patch fixes it.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Check out an item with no rental charge
- Verify no confirmation message appears
- Check out an item with rental charge
- Verify rental charge shows
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sponsored-by: Ville de Victoriaville, QC
Confirmation box contents:
"Please confirm checkout"
"-Rental charge for this item: n"
[Yes, check out (Y)] [No, Don't Check Out (N)]
Test case A: Confirm checkout
1) Go to checkout user "X"'s checkout page.
2) Enter barcode for an item with rental fees.
3) Click the "Check out" button.
4) Confirmation box appears.
5) Click on the "Yes" button.
6) Item is added to checkout list.
7) Fees are added to the patron's account.
Test case B: Decline checkout
1) Go to checkout user "X"'s checkout page.
2) Enter barcode for an item with rental fees.
3) Click the "Check out" button.
4) Confirmation box appears.
5) Click the "No" button.
6) Checkout page goes back to its initial state.
7) Patron has no item checked out and no fees to pay.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With the system preference RentalFeesCheckoutConfirmation
set to "don't ask" there is no change in behaviour.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently, 020$z (and 010$z fr UNIMARC) occurences are not shown, but the XSLT logic
used introduces punctuation characters for those $z occurences.
This patch adds a check for the existence of subfield a, and only loops
on $a subfields.
To test:
- Create/have a record with 020$z (or 010$z on UNIMARC) but no 020$a (no 010$a on UNIMARC).
- Open the detail page for the record (on both OPAC and staff).
=> FAIL: the ISBN label and ';' and '.' characters incorrectly shown.
- Repeat mixing with 020$a occurences to notice the bug.
- Apply the patch, reload
=> SUCCES: ISBN label shows only on the presence of a $a, and $z are skipped.
no matter how many ISBN fields you add.
- Sign off :-D
Regards
To+
http://bugs.koha-community.org/show_bug.cgi?id=12901
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works, and so I'll sign off, but I'm not crazy about the workflow.
Having the error message display on an otherwise empty page is not user
friendly. The entry form should be redisplayed so that the user can
modify the data they submitted.
That really should be changed in a follow-up.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The previous patch for adding a confirmation dialog didn't work to make
the confirmation message translatable. This alternate patch uses a
progressive-enhancement method recycled from Guided Reports to trigger a
warning and highlight the row which was clicked.
To test, apply the patch and try to delete an existing rotating
collection. You should get a confirmation dialog, and the corresponding
row in the table should be highlighted red.
Clicking cancel should cancel the deletion. Clicking OK should complete
the deletion.
To test the translatability of the confirmation message:
Run perl translate update [a language code, e.g. 'en-GB']
Search [lang]-i-staff-t-prog-v-3006000.po for the message string
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Description is no longer made required by the template and an empty
description is saved correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This follow-up makes drastic changes to the templates in order to bring
them into compliance with established patterns and markup guidelines.
Only minor changes are made to perl scripts.
Changes:
- Add a toolbar include for displaying new, edit, transfer, and delete
buttons.
- Improve title and breadcrumbs with collection titles and better
specificity.
- Correct page structure which was inconsistent with the markup of
similarly-structured pages.
- Correct styling of error and informational messages.
- Added detailed error messages for a couple of conditions which were
not defined in the template.
- Add link to the detail page of titles which are in a collection using
the view defined in the IntranetBiblioDefaultView preference.
- Add a link to remove an item from a collection directly without having
to scan the barcode.
- Add client-side validation to collection creation form.
- In RotatingCollections.pm, add biblionumber to the list of columns
returned by GetItemsInCollection.
- In rotating_collections/*.pl, remove obsolete declaration of system
preference variables.
To test, perform all the operations associated with Rotating
Collections:
- Add a new collection
- Edit an existing collection
- Add items to a collection
- Remove items from a collection (via barcode and link)
- Test the behavior of all new toolbar buttons
- Verify that titles and breadcrumbs look correct and links work
correctly.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Test Plan:
In "Tools" -> "Rotating Collections" -> "Add/Remove items":
When adding item barcodes to the collection, the input field
<input type="text" id="barcode" name="barcode">
should become active
automatically so it is easy to add multiple barcodes rapidly without touching the
mouse or keyboard.
Enter-press is dealt by the barcode reader so automatic form submittal should be handled
by the barcode reader.
In "Rotating collections" -> "Transfer Collection":
When the collection is initially transferred, items are set to trasfer correctly.
When the collection is transferred while items are still being transferred, the transfer
destination library doesn't change from the original one.
The holding library changes for all items in the collection to the destination library on
retransfers as well.
This is tricky if a user accidentally places the wrong destination.
When I try to checkin these items to their new retransfer location, I get the following messages:
-"This item is part of a rotating collection and needs to be transferred to <original transfer destination>"
-"Please return Valkoinen ihmissyj / to <original transfer destination>"
-"Print slip or Cancel transfer"
When I checkin a Item to a arbitrary branch, I get the following messages:
"This item is part of a rotating collection and needs to be transferred to <retransfer destination>"
"Please return Valkoinen ihmissyj / to <original trasfer destination>"
Bug 8836 - Resurrect Rotating Collections - QA Followup
Bug 8836 - Resurrect Rotating Collections - Followup 2 - Perltidy rotating collections scripts
Bug 8836 - Resurrect Rotating Collections - Followup 3
* Fix bad TT Tag
* Fix bad sql query
* Fix capitalization ( HTML4 )
* Allow a rotating collection's location to keep AutomaticItemReturn
from sending it back to the branch of origin
* Fix bad query
Bug 8836 - Resurrect Rotating Collections - Followup 4 - Autofocus on barcode field
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Don't transfer issued and waiting items
Items in a rotating collection are automatcially transferred when a
collection is transferred. This is a problem for currently checked out
items and items on hold marked as "Waiting".
This patch resolves this issue by skipping the transfer for those items.
When the items are then returned, the librarian will be alerted to
transfer the item to the library currently holding that rotating
collection.
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Link collections.colBranchcode to branches.branchcode
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
http://bugs.koha-community.org/show_bug.cgi?id=8835
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This patch addresses the case where OnSiteCheckoutsForce is enabled and
the user is checking out to a patron who is blocked from checking out.
Instead of showing the 'specify due date' form (which is disabled) this
patch hides it and highlights the on-site checkout controls.
This patch adds some CSS and consolidates some redundant CSS.
To test, load a patron for checkout under the following conditions:
1. OnSiteCheckoutsForce is off and patron is not blocked from checkout
2. OnSiteCheckoutsForce is off, patron is blocked from checkout (for
being expired or restricted).
3. OnSiteCheckoutsForce is on and patron is not blocked from checkout
4. OnSiteCheckoutsForce is on and patron is blocked from checkout
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Checked these 4 conditions, plus that if a specified due date was allowed, that it was enforced.
I noted that the on-site checkouts seemed to take longer to process, but this probably isn't the place for that sort of complaint.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small visual improvment for a new feature. No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The staff client search history page does not required the DataTables
columnFilter plugin, so the link (which pointed to the wrong location
anyway) can be removed.
To test, apply the patch and view your search history in the staff
client. Table sorter functions (sorting, paging, and searching) should
work correctly for current and previous sessions of catalog and
authority searches.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
This patch just affects the staff search history page which is still fully
functionnal after applying the patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On member details page, number of issues are not shown. It's caused by,
old variable name for issue count in Moremember.tt template.
To test:
Apply patch go to member details page and check if there's number
alongside "Checkout(s)" tab.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change for more consistency. Works nicely.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This code is duplicated and should be centralised.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11703 breaks the checkouts export feature.
To reproduce: Fill the ExportWithCsvProfile pref and go on the
circ/circulation.pl page. The export column appears, but not the export
button.
Test plan:
Go on the checkout list (circ/circulation.pl and members/moremember.pl)
and verify the export column and the export button appears.
If you click on the button, a file should be generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This template followup makes several changes to markup and text:
- Replace "Bibliographic reference" with "Title"
- Replace "Callnumber" with "Call number"
- Replace "Home branch" with "Home library"
- Replace "Holding branch" with "Current location"
- Replace "Location" with "Shelving location"
- Replace "Issues" with "Checkouts"
- Replace "Indifferent" with "Ignore"
- Replace "&" with "&" where necessary
- Correct page title and breadcrumbs
- Remove label "for" attribute from labels which do not directly target
a form field
- Correct label "for" attribute on labels which should target a form
field
- Correct date format hint
This patch also makes one change to the way the page display works:
The search results section is now in a separate div which uses a
different grid rule, allowing it to take up the full width of the
screen. To keep the page headers from looking weird I've changed the
markup so that each section has its own header.
To test, perform a variety of searches and confirm that the output in
both Screen and CSV views looks correct.
Confirm that search results which are output to the screen are formatted
nicely and that the "edit search" links work correctly to show the
search form. Submitting a new search after editing a search should hide
the form and redisplay the search results table.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, improves display.
- Reword 'joker' to 'wildcard'
- Explain what wildcards do
- Reword 'Modify' to 'Edit'
Also fix jQuery plugin columnFilter path
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
and display the 'Processing ...' box when datatables is loading new
data.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Nice box
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Item search is available at catalogue/itemsearch.pl (link is in
catalogue/search.pl)
It only uses SQL (not Zebra)
* Use DataTables and server-side processing to be able to filter on
individual columns after the first search is done.
* Allow to export results in CSV
* With Javascript disabled, search form still works (and CSV export too)
There is the possibility to define "Custom search fields" in a new admin
page admin/items_search_fields.pl (link is in admin/admin-home.pl)
A custom item search field is defined by:
* a name: its unique identifier
* a label: the text displayed to the user
* a MARC field/subfield: the field/subfield to query (it uses
ExtractValue)
* an authorised values list (optional): if defined the list is displayed
in the search form
New Perl dependency: Template::Plugin::JSON::Escape
Test plan:
1/ Apply the patch and run updatedatabase.pl
2/ Go to advanced search (staff interface), then click on "Go to item
search"
3/ Play with the search form! :)
In the 3rd fieldset you can add as many fields as you want and combine them with
boolean operators (AND, OR). You can use SQL jokers characters (%, _)
You can output to screen (in a DataTables table) or to a CSV file.
4/ In the DataTables table, play with filters and try sorting columns.
5/ Disable Javascript (with Firefox: extensions NoScript or YesScript,
or in about:config 'javascript.enabled' = false
6/ Reload the search page and do some searches on screen output. (there
is no sorting or filtering features, but there is still pagination)
7/ Try again CSV output.
8/ You can re-enable Javascript.
9/ Go to Administration > Items search fields
10/ Add a new field. Example for title (in UNIMARC):
Name: title
Label: Title
MARC field: 200
MARC subfield: a
Authorised values category: None
(add another field with an authorised values category to see the
difference).
11/ As you are there try to update and delete some fields.
12/ Go back to items search form. You can see in the 3rd fieldset that
your fields have appeared in the selects.
13/ Try searching on them.
14/ I think you're done :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Good new option.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This feature will allow libraries to specify that, when an item is returned,
a local hold may be given priority for fulfillment even though it is
of lower priority in the list of unfilled holds.
This feature has three settings:
* LocalHoldsPriority, which enables the feature
* LocalHoldsPriorityPatronControl, which selects for either tha patron's
home library, or the patron's pickup library for the hold
* LocalHoldsPriorityItemControl, which selects for either the item's
holding library, or home library.
So, this feature can "give priority for filling holds to
patrons whose (home library|pickup library) matches the item's
(home library|holding library)"
Test Plan:
1) Apply this patch
2) Run t/db_dependent/Holds/LocalHoldsPriority.t
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Checks in the circulation template for on-site checkouts preferences did
not take into account the possibility that someone might have
accidentally turned OnSiteCheckouts off but left OnSiteCheckoutsForce
turned on. This patch amends the template logic so that it works
correctly for various combinations of settings.
To test, apply the patch and test the following combinations of
circumstances.
Testing using both a patron who is blocked (expired, restricted, etc)
and a patron who is not blocked, test with...
1. OnSiteCheckouts is on, OnSiteCheckoutsForce is on
2. OnSiteCheckouts is off, OnSiteCheckoutsForce is on
3. OnSiteCheckouts is off, OnSiteCheckoutsForce is off
4. OnSiteCheckouts is on, OnSiteCheckoutsForce is off
Confirm that the checkout form is shown or not shown correctly according
to the preferences you have set. Confirm that the "Only on-site
checkouts are allowed" message is only shown in case #1.
Note: This patch includes whitespace changes, so please diff
accordingly.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested on top of 10860 and 13179.
Works as described, adding more checks in the templates.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The circulation page layout needs to work correctly for various
combinations of restrictions, no restrictions, and restrictions with
OnSiteCheckoutsForce enabled. This patch makes some minor accomodation
for all.
To test, load a patron for checkout under the following conditions:
1. OnSiteCheckoutsForce and patron is not blocked from checkout
2. OnSiteCheckoutsForce is off, patron is blocked from checkout (for
being expired or restricted).
3. OnSiteCheckoutsForce is on and patron is not blocked from checkout
4. OnSiteCheckoutsForce is on and patron is blocked from checkout
The page layout should look correct for all these cases, with a clean
two-column layout of [ checkout form | messages ] in all cases except
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Applied on top of 10860. Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fixing some simple display issues caused by missing/misnamed
variables, probably consequence of the renaming before.
Amended test plan:
- Make sure that if OnSiteCheckoutsForce is set, you can
still perform onsite checkouts and only those.
- Check the detail page in staff says *currently in local use by*
for an on-site checked out item
- Check the detail page in OPAC with OPACShowCheckoutName active
for the same.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- capitalization fix "Checked out"
- display new tabs only when feature is activated
- fixes a qa script complaint about POD in Items.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements the In-House Use feature for Koha.
It adds:
- 2 new sysprefs:
'In-House Use' to enable/disable this feature
'In-House Use Forced' to enable/disable the feature for *all* users.
- 2 new columns issues.inhouse_use and old_issues.inhouse_use
- Datatable on the circulation history pages (readingrec) at the OPAC
and the intranet.
A new checkbox in the Circulation tab. If checked, the issue become a
in-house use (in the statistics and issues tables).
When you check it, the due date changes to the today date.
The syspref "In-House Use Force" allows to force the in-house use to
permit the checkout even if the borrower is debarred or others problems.
In the issue table, a new string (in red) marks the issue as "in-house use".
The circulation history contains 3 tabs : "all", "checkout" and
"in-house use" (OPAC and intranet).
The cronjob script:
If AutomaticItemReturn if off, a library would like not to do a transit
operation manually. This script (to launch each night) do returns
for a specific branches.
Test plan:
1/ Execute the updatedatabase entry
2/ Enable the 'In-House Use' pref.
3/ Checkout a biblio for a patron and check the 'in-house use' checkbox.
4/ Check that the due date is the today date (with 23:59) and is not modifiable.
5/ Click on the check out button and check that the new check out
appears in the table bellow with the "(In-house use)" string.
6/ Go on the circulation history pages (readingrec and opac-readingrec)
and try the 3 tabs. In the last one, your last checkout should appear.
7/ Check in.
8/ Check readingrec pages.
9/ Choose a debarred patron and check that you cannot checkout a biblio
for him.
10/ Switch on the 'In-House Use Forced' pref
11/ You are now allowed to checkout a biblio for the debarred patron.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The method C4::Budgets::GetBudgetHierarchy() retreives from database budgets in an array containing a tree of budgets (parent -> children -> children, ...).
The code generating this tree with the SQL results needs optimization because when a lot of budgets exists, it can run during several minutes.
This patch rewites the code using a recurive method.
Test plan :
- Create a active budget "MyBudget" with 1000
- Click "Add found" on this budget
- Create a found "Parent" with 1000, set you has owner
- Click "Add child found" on found "Parent"
- Create a found "Child" with 100, set you has owner
- Click "Add child found" on found "Child"
- Create a found "Grand-child" with 10, set you has owner
|
- Create a new acquisition basket
- Add a new order with "Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Add a new order with "Grand-Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Close basket
- Perform the receive of the two orders
|
- Go to founds of "MyBudget"
=> You see a table with 3 founds
- in "Fund filters", select no library and uncheck "Show my funds only" and click on "Go"
=> You see a table with "Parent" found
- Click on small arrow left of the fund code of "Parent"
=> You see a new line with "Child" found
- Click on small arrow left of the fund code of "Child"
=> You see a new line with "Grand-Child" found
|
=> You see in "Grand-Child" row "Base-level spent" = 2 and "Total sublevels spent" = 2
=> You see in "Child" row "Base-level spent" = 2 and "Total sublevels spent" = 4
This confirms the founds are used in a hierarchie.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This alternate follow-up modifies the text of the label to
(hopefully) make it more clear. The markup has been revised someone to
make it more standard, and a warning has been added about overwriting
existing data.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Looks good.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to set an owner to a fund hierarchy
On editing a fund, if it has children, a new checkbox appears "Set this
owner to all children funds".
If checked, all the fund hierarchy will herit to this owner.
This will facilitate the fund owner modifications.
Test plan:
- Verify that the new checkbox only appears if the fund has at least a child.
- Create a consistent fund hierarchy, something like:
fund1
fund11
fund111
fund12
fund2
fund21
- Try to modify a fund owner without checking the checkbox. Verify the
children have not been modified.
- Try to modify a fund owner with checking the checkbox. Verify all fund
hierarchy has been modified.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works as announced.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If there is an error during the receive shipment process the error
message is incorrectly styled. This patch fixes it.
To test you can trigger the error by accessing the page with incorrect
or missing parameters:
/cgi-bin/koha/acqui/parcels.pl?op=confirm
This should trigger the message. Apply the patch and confirm that the
error is now styled consistently with others in the staff client.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This minor followup makes two changes:
- Replaced instances of "Debarment" with "Restriction"
- Moved the override button into the block where the "View restrictions"
button is, making the section slightly more compact.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Some small template changes, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Apply first patch
Apply this patch
Log in as superlibrarian
Go to Home > Patrons > Set permissions for issuing staff member
Disable circulate - force_checkout
Log in as issuing staff member
Try to checkout to a debarred patron
=> should not be possible
Log in again as superlibrarian
Enable circulate - force_checkout for issuing staff member
Log in as issuing staff_member
Try to checkout to a debarred person
=> You should get the button 'Override debarment temporarily'
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add a button to temporarily override patron debarment.
To test:
1) Go to patron check out page
2) If patron has been debarred (eg. due to having fees),
there is no way to check out to that patron.
3) Apply patch
4) A debarred patron check out page now has a button for
"Override debarment temporarily" - clicking on it
should allow checking out to that patron.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Rebased because patch did not apply
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with/without force_checkout and superlibrarian permission.
Also checked crafting a URL is no longer working.
No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow up makes some corrections to the previously added files and
adds some functionality to the diff: A Javascript diff plugin highlights
the differences between the records in the two columns.
Corrections made: Converted tab indentation to spaces, corrected GPL
statement.
File organization: Moved showdiffmarc.pl and .tt to /tools/ to match the
location of the page with which it functions,
tools/manage-marc-import.pl. Corrected permissions on showdiffmarc.pl
accordingly.
Updates to the template: Added standard includes inclucing header menu
and breadcrumbs; converted custom layout to YUI Grid standard.
To test, follow the test plan previously defined:
- Stage a MARC record batch which contains at least one record match for
something already in your catalog.
- Locate the staged MARC record batch in Tools -> Manage staged records
and click to view the contents.
- Find the record which matched an existing record and click the "View"
link in the Diff column.
- The compare screen should include the header menu and breadcrumbs. The
differences between your staged file and the existing record should be
higlighted.
- You should be able to return to the MARC batch you were previously
viewing by following the link in the breadcrumbs or the link at the
bottom of the page.
- Confirm that the "About" page includes information about the new
JavaScript plugin on the Licenses tab.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I forgot to include these files in the last patch
new file: tools/showdiffmarc.pl
new file: koha-tmpl/intranet-tmpl/prog/en/modules/tools/showdiffmarc.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
New patch should apply correctly.
modified: C4/ImportBatch.pm
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 11876 - Diff column is now displayed.
If a match is found, a 'View' link appears in the Diff column.
Old patch was not implementing datatables, and therefore was not compatible with this version of Koha.
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
modified: tools/batch_records_ajax.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
These patches have some issues but I'm going to submit a follow-up which
I think will address them all and offer some improvements as well.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://www.loc.gov/marc/bibliographic/bd007f.html
- Catalog a record:
* 007 - choose 'Tactile material'
* Pos. 1 - choose b = Braille or C = combination
* Reindex!
* Verify the result list shows the format correctly.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Problem exist, fixed with this patch.
No koha-qa errors
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently, 022$z (and 011$z for UNIMARC) occurences are not shown, but the XSLT
logic used introduces punctuation characters for those $z occurences.
This patch adds a check for the existence of subfield a, and only loops
on $a subfields.
To test:
- Create/have a record with 022$z (or 011$z on UNIMARC) but no 022$a (no 011$a on UNIMARC).
- Open the detail page for the record (on both OPAC and staff).
=> FAIL: the ISSN label and ';' and '.' characters incorrectly shown.
- Repeat mixing with 022$a occurences to notice the bug.
- Apply the patch, reload
=> SUCCES: ISSN label shows only on the presence of a $a, and $z are skipped.
no matter how many ISSN fields you add.
- Sign off :-D
Regards
To+
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as described on an UNIMARC DB. Mimics what's done for ISBN field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When staff member, without manage_patron_lists permissions, search for
patrons on result page, he gets table with additional column in head
table.
Test plan:
Log in as staff member without manage_patron_lists permissions, search
for any patron.
Check that table with results is fine now.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes problem by adding a permission check to the template.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Remove tab characters in acqui/addorder.pl
* Remove FIXME in acqui/cancelorder.pl
* Fix typos: "canceled" -> "cancelled", "occured" -> "occurred"
* Replace "Click here" link by "OK"
* Add a column to aqorders to store cancellation reason instead of
having it in aqorders.notes, to avoid having untranslatable strings in
database
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some code was duplicated, all is now in cancelorder.pl
Added possibility to provide a reason for cancellation (or other things,
this is saved in aqorders.notes)
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When Bug 2969 made report name required for SQL reports, it did so only
for new reports. This patch makes the same requirement true when editing
existing reports.
Other changes:
- Removed unused "type" setting from edit screen (already removed from
creation form).
- Added form field size attribute to report name field to match creation
form.
- Moved SQL textarea into its own fieldset and marked it as required,
matching the report creation form.
To test, apply the patch and edit an existing saved SQL report. You
should be prevented from saving your report with either the report name
or SQL field blank. Test with JavaScript enable and disabled.
Confirm that after entering valid data your report runs correctly.
Compare the new SQL report form with the update SQL report form. They
should be structured the same.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the OPAC prog template going away, the only remaining use of the
yuipath preference is on the basketgroups template. The yuipath
preference should be removed and the local path hard-coded.
This patch:
- removes yuipath handling from C4/Templates.pm
- removes the preference from sysprefs.sql
- deletes the preference via updatedatabase.pl
- removes the preference from the staff client preferences file
- removes unused references to the YUI assets from the help file
header include
- adds the local YUI asset path to acqui/basketgroup.tt
To test, apply the patch and run the database update. View some online
help pages and confirm that they function correctly. View the
basketgroups page (Acquisition -> Vendor -> Basket groups), edit a
basket group, and confirm that basket drag and drop operations work
correctly.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Online help and basket group drag&drop functionality still work correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes hardcoded 'prog' from themelanguage on C4/Templates.pm
It adds a new syspref OPACFallback to hold the prefferred fallback
theme for new themes with minimal changes.
This does not brake CCSR if new syspref value is 'prog',
using 'bootstrap' works somehow, but with strange results.
To test:
1) Apply the patch
2) Run updatedatbase.pl
3) CCSR, prog & bootstrap must work as usual
4) Need to test theme/language fallback
a) translate for your preferred language (xx-YY)
b) enable language on opac
c) go to opac, select that language
d) login on opac, go to personal details
e) remove koha-tmpl/opac-tmpl/bootstrap/xx-YY/modules/opac-memberentry.tt
d) reload page, must load in English
f) click other member options, must load on translated language
(can use other pages, ccsr, prog or bootstrap)
5) Do a similar test but for a staff page, enable lang, switch to it,
rm koha-tmpl/intranet-tmpl/prog/xx-YY/modules/admin/admin-home.tt,
any page must be translated except for admin home.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR now deprecated there is no longer a need for the
OPACMobileUserCSS system preference. This patch removes it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR having been deprecated there is no longer a use for the
OpacMainUserBlockMobile system preference. This patch removes it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR having been deprecated there is no longer a use for the
OpacShowLibrariesPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds JS and HTML espaces are it is missing.
Replaces calls to url filter by uri filter, url filter does not espace
enough characters: http://template-toolkit.org/docs/manual/Filters.html#section_url.
Also corrects the fact the code: resul.size => resul.item('size').
Old code returns the size of the loop instead of the value of "size" field.
Test plan :
- Use the plugin unimarc_field_4XX
- Perform a search with a ? or &
=> Search works
- Perform a search that returns a record with a double quote in title
- Choose this record
=> Plugin works
- Check the results displays well the value of biblioitems.size
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, I fixed some tabs.
Tested in a UNIMARC installation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the name of the .tt file as a HTML comment to OPAC and Staff client pages.
To test:
Apply patch
Open pages in OPAC and Staff client.
Make sure that a comment similar to the following appears in the source code:
<!-- TEMPLATE FILE: intranet-main.tt -->
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
this patch:
- reintroduces the ISSN column
- fix a wording (already there before the main patch)
- fix the tests if a serial was already in late
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small change: Removed 2 tabs in claims.tt and fixed order
of ISSN/Issue number column descriptions as they were switched.
Note: The <order> tags are currently not stripped out of the
notice.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new DB field serial.claims_count
This field already exists for late orders. It makes sense to introduce
it for serial.
Test plan:
0/
a) Does not apply the patch.
b) Remove all your claimissues notices and be sure you have some serial issues
in late.
c) remove email address for the vendor you will use.
d) remove email address for the logged in user.
e) Export claims using the csv export => The selected issues will be
marked as claimed.
f) logout/login (to update the email address).
1/ Apply the patch and execute the updatedb entry.
2/ Go on the Serials > Claims page
3/ Verify that you get a warning message 'No claimissue notice defined'
4/ Verify the vendor list is correct (with the number of serial in late.
You should not get any changes here.
5/ Select one vendor and verify that the issue which was claimed before
has a claim count set to 1.
6/ Verify that you are not able to send notification to the vendor.
7/ Create a claimissue notice.
Something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
8/ Go on the Serials > Claims page, the warning message does not appear
anymore.
9/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for this vendor).
10/ Add an email for the vendor.
11/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for your user).
12/ Add an email address to your user
logout/login
13/ Select issues. Select a notice. And "Send notification".
You should get a happy message: the email has been sent!
14/ The email will contain the order tags if bug 12851 is not
pushed/applied.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some small issues fixed in a follow-up.
Note: If you change the email address of your staff user, you will
have to log out and back in to make the change take effect.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes columns Holds, Items and "Hold ratio" to sort
numerically instead of lexicographically. Also changes default sorting
column from "Holds" to "Hold ratio" because this is a hold ratios
-report, not hold count report.
Also cleans up an excess aoColumn -definition, because aoColumns ==
aoColumnDefs without target operator. No point in defining columns
twice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch use the new module into pl and tt script.
Note that we could use it in the acqui/pdfformat/layout*.pm files.
Test plan:
1/ Verify that the acquisition home page displayes the prices as before.
2/ Verify that the budgets page displayes the prices as before.
3/ Verify that the funds page displayes the prices as before.
4/ Verify that the planning page displayes the prices as before. (Note
that 1 price is now formatted: 'Fund remaining').
5/ Create an order from a staged file. This stage file should contain a
formatted price.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The application of the "noEnterSubmit" class to textareas in the
cataloging editor prevents the user from being able to use the Enter key
to create line breaks. This is not intentional and should be corrected.
This patch adds more specific scoping to the relevant JavaScript.
To test, apply the patch and clear your browser cache if necessary. Open
up the MARC editor and locate a tag which uses a textarea for entry. Try
typing lines of text separated by line breaks. The enter key should work
correctly.
Signed-off-by: bondiurbano costalc@gmail.com
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and fixes the problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the treeview plugin in the staff client from the
language-specific lib/jquery/plugins directory to the one outside the
theme directory.
To test, apply the patch and view the "Set permissions" page for a
patron. The list of permissions should display in an expandable list as
usual.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works, following the test plan. I can see the jQuery treeview plugin moved
from 'prog' language specific directory to the global lib/plugins directory.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Found no other places where we use this plugin.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces a syspref (FacetMaxCount) that controls how many
facets to show for each category (e.g. Author).
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It would be nice if there were a simple way to access the name and
branchcode of the currently logged in library, as well as the logged in
user via JavaScript ( via intranetuserjs ).
I propose the following:
1) Remove the whitespace surrounding the loggedinusername span
2) Wrap the logged in branch name with a span that has an id
3) Add the branchcode in a hidden span that has an id
Test Plan:
1) Apply this patch
2) Log into Koha
3) Inspect the html source code
4) Note the lack of whitespace within the tag <span class="loggedinusername">[% loggedinusername %]</span>
5) Note the logged in branch name is now surrounded by a span with an id
6) Note below that is a span containing the branchcode, also with an id.
7) Verify the branchcode span is hidden by default.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the text for zebra_auth_index_mode and zebra_bib_index_mode
entries missing on koha-conf.xml telling the user GRS-1 is deprecated.
It also adds another check for those preferences set to GRS-1, and shows a
warning message if set to grs1.
To test:
- Apply the patch and try all combinations:
- zebra_auth_index_mode and zebra_bib_index_mode missing
- zebra_auth_index_mode and zebra_bib_index_mode set to grs1
- Sign off :-D
Regards
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I've played with the 3 related koha-conf.xml file parameters:
zebra_auth_index_moda, zebra_bib_index_mode missing, and use_zebra_facets.
Inconsitencies are properly reported in About page thanks to this patch. It
would be helpfull to admin upgrading their Koha installation.
And by the way, thanks Tomas for the new Zebra facets functionnality. It's a
'joy' to see it into Koha.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, tested in UNIMARC and MARC21.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes two jQuery plugins which were used only by
Solr-related templates. With the removal of Solr these plugins are
obsolete.
To test, search the Koha code for references to the two plugins:
jquery.textarea-expander.js
tablednd.js
There should be none.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Couldn't find any references. Also passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Apply patch
2/ Add or Edit a branch, filling out the new fields
3/ Check that the changes saved
http://bugs.koha-community.org/show_bug.cgi?id=9530
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To allow for separate Reply To and From email addresses for notices
This patch will make no functional changes, it just sets up the db
changes needed.
To Test:
Apply patch, upgrade DB, make sure everything still works fine
(Or wait to test with following patches)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The series of links in the "actions" column of the budgets
administration summary table are not very readable as they are, all
strung together: Edit Delete Duplicate Close Add fund.
This patch moves the links into an "Actions" menu, similar to the change
made by Bug 10615 in Reports.
To test you should have multiple active and inactive budgets. Apply the
patch and go to Administration -> Budgets. Confirm that each menu item
links to the correct action. Test the menu for both active and inactive
budgets.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Nice improvement on template level, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch re-implements the database changes from the original patch
and adds an update for existing reports. It also reimplements the
client-side validation using the new built-in validation plugin and adds
coverage for SQL reports.
I have also added the "required" attribute to the SQL report textarea
since saving a report with no SQL triggers an error.
To test:
- Create a new guided report. Confirm that you cannot save your guided
report without a report name.
- Create or edit a saved SQL report. Confirm that you cannot save your
report without a name or without SQL.
- Confirm that the saved_sql table structure has been updated.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Functional tests pass, database tables look correct to me.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Even with JS disabled, the form can not be submitted without the
report name filled in.
However we are not checking this server side .. if this was the public
interface that would be a fail. I will leave this up to the RM to
decided if client side checks are ok for this. Bearing in mind we
weren't handling any sql errors properly server side before this.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: description of the updatedb entry
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The TT plugin is used in the template, it is useless and can cause
problems to format the dates before sending them to the template.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes the problem I was seeing before, didn't find any regressions.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked all three settings of dateformat. Looks fine to me.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds two checks to about.pl:
- use_zebra_facets entry presence in koha-conf.xml
- use_zebra_facets==1 and zebra_bib_index_mode==dom
The idea is to alert the user if it has conflicting or wrong settings. Even
if there's a fallback to a working configuration.
To test:
- On clean master install, go to the about page
=> SUCCESS: No warnings regarding use_zebra_facets
- Comment out the use_zebra_facets entry, reload
=> SUCCESS: The about page mentions the use_zebra_facets entry is missing
- Uncomment the use_zebra_facets entry, make sure it is set to 1
- Change zebra_bib_index_mode to 'grs1', reload
=> SUCCESS: The about page says zebra_bib_index_mode is not set to DOM even though
you have use_zebra_facets set.
- Sign off :-D
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan with success
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested by changing the koha-conf.xml file.
Note: There is no warning if use_zebra_facets is 0.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes some language and spelling corrections to the
system preference descriptions. I have updated the preferences heading
to read "Share anonymous usage statistics" in order to emphasize the
anonymous aspect.
I have also updated the main preference name from "UsageStatsShare" to
"UsageStats" so that it is alphabetized first in the list of
"UsageStats*" preferences. I think this will make it clearer to the Koha
administrator what feature they are configuring.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch set reintroduced the formerly removed system preference,
just removing it again.
Also fixes complaints of the QA script about POD in the new module.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Goals:
- Collecting Koha usage statistics
- Rendering stats on a community website
- Having a big bicture of how koha is used
3 parts in the project:
- this patch in koha
- hea-ws which collects data
- hea-app which renders data
Installation:
1/ Fill systempreferences:
UsageStatsLastUpdateTime UsageStatsID UsageStatsShare UsageStatsLibraryName
2/ Setup a cron in your crontab (ex: at 3:00 every first of the month):
0 3 1 * * export KOHA_CONF=/home/koha/etc/koha-conf.xml; export PERL5LIB=/home/koha/src; perl /home/koha/src/C4/UsageStats.pm
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the "Publication date" and "Acquisition date"
searches when using non-QueryParser and QueryParser searches.
It adds structure attributes to the template, which is consistent
with how phrase searching is currently handled.
It removes unnecessary code from Search.pm, adds some necessary
code which is consistent with existing code, and adds a lot of
explanatory comments.
_TEST PLAN_
Before applying:
0) Turn off QueryParser
1) Try a "Publication date" or "Acquisition date" search from the
staff client advanced search.
2) Note that even though the description on the result page makes
it seem like you're doing an index-specific search, you're actually
doing a keyword search. You can verify this by checking the 008
from positions 7 to 10 for "Publication date" or "Date accessioned"
on items for "Acquisition date".
3) Turn on QueryParser
4) Try doing the searches from Step 1.
5) A "Publication date" search should probably produce zero results
After applying patch:
6) Keep QueryParser on
7) Try doing the searches from Step 1.
8) Notice that you're actually getting results consistent with
your search (ie the 008/7-10 shows the date you searched for,
and there is a "Date accessioned" in items which matches your
search)
9) Turn off QueryParser
10) Note that your results are exactly the same as step 8
(N.B. this is because QueryParser is falling back to non-QP mode
instead of producing a bad query.)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The system preference TimeFormat decides if times are formatted in 24
hour or 12 hour format. The issue at hand is that this changes the time
description for fines. Let us assume the time format is currently 24
hour, and there are overdue items with accruing fines. When the format
is changed to 12 hour, and fines.pl is run, it will begin looking for
fines with a 12 hour format. Since there are no, it will create a new
fine and you will now have two fines for the same item!
There are solutions which require database manipulation:
1) Update all existing fines from 24 hour to 12 hour format
2) Delete all existing accruing fines so they are all regenerated the
following night
The same situation applies to DateFormat.
The accounts rewrite ( Bug 6427 ) will resolve this issue, as it does
not look for existing fines based on the description.
I believe the best course of action until bug 6427 is pushed to master
is to add a warning to the system preference to not alter it on a
production server with existing fines.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds some documentation to warn about the problem.
Tested the new addition shows up in po files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Form fields in the staff client which are required should be configured
to be so by doing several things:
- Add a class "required" to the field's <label>
- Add a class "required" to the form field
- Add 'required="required"' to the form field
- Apppend a <span class="required">Required</span> after the form field.
Several places in the templates are missing the <span>. This patch adds
them.
To test, apply the patch and view the following pages to confirm that
the "Required" text appears:
- Acquisitions -> Add an order to a basket from a new (empty) record.
Title, quantity, and fund should indicate they are required.
- Administration -> Authority types -> New authority type. The
authority type and description fields should indicate they are
required.
- Administration -> Authority types -> MARC structure -> New tag. The
tag field should indicate it is required.
- Patron types and categories -> New category. Category code,
description, and category type should indicate that they are required.
FIXME: Enrollment period is required but the user must choose one. I'm
not sure how to handle that clearly.
- Tools -> CSV profiles. Profile name, profile type, and profile MARC
fields should indicate they are required on both the new and edit
forms.
- Administration -> Manage MARC modification templates. Under "Create a
new template" the name field should indicate that it is required.
- Tools -> Batch patron modification -> Submit a batch for editing. Any
fields which are required according to your BorrowerMandatoryField
system preference should indicate that they are required.
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
QA Edits: Re-worded the "required" not on the batch patron edit form,
added a missing word to the help text on that page. On the csv-profiles
page I removed an unnecessary "javascript:" protocol from the markup.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works and passes QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The holds queue report shows codes for item shelving location and for
library transfer location. This patch adds template plugin handling of
both these fields to display their full description.
To test, make sure you have one or more items in your holds queue which
have a shelving location. Rebuild your holds queue if necessary and view
it. Items which have a shelving location should show the description
instead of the code. The "send to" column should show the library name
instead of code.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, making use of the TT plugins.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The message in circulation.tt assumed to get days but date is given. Updated comments and message depending on expiration date or no expiration of restriction.
The message shows up on top of Bug 643 Allow override of 'debarred' status if a patron has a restriction.
Replaced date_format with date template (see comment #6)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The checkouts table is no longer keeping "today's checkouts" in the
order they were scanned.
Test Plan:
1) Create 3 records "Test 1", "Test 2" and "Test 3" each with one item
2) Check out the items to a patron in the order "Test 2", "Test 1", "Test 3".
3) Note the order is incorrect.
4) Apply this patch
5) Refresh the page
6) Note the order is now correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note that the bug already exists before bug 12550. I checked on a 3.14.x
branch (without the ajax circ stuff), and the order is the same as with
this patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Now that a patron's checkouts are loaded asynchronously, we can further
improve Koha's performance by not loading the checkouts table when it is
not needed. For example, if a librarian is checking out 5 items to a
patron, we really don't need to load the table during the scanning of
items 1 to 4, just for item 5. Another example would be browsing to the
patron details table in order to change a patron's password.
Test Plan:
1) Apply this patch
2) Browse to circulation.pl for a patron
3) Note the table is not loaded automatically
4) Click the "Show checkouts" button
5) Note the checkouts table loads
6) Check the "Always show checkouts immediately" checkbox
7) Reload the page, the checkouts should now load immediately
8) Repeat steps 3-7 for the patron details page ( moremember.pl )
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: remove trailing spaces.
Note: I am not sure the checkbox is at the best place, but I don't have
a better suggestion.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As a result, this patch removed the deprecated tag from the
intranet templates.
And since there was just 1 other tiny error in the same template
file, the checked="checked" was removed from a text box.
TEST PLAN
---------
1) Install the HTML Validator 0.9.5.8 for FireFox.
2) Open Intranet to Home -> Tools -> News
3) View Page Source
-- you'll notice the message about language="javascript" being
one of the error messages.
4) Click Edit beside one of the news items.
5) View Page Source
-- you'll notice the message about language="javascript" being
one of the error messages.
6) Apply patch
7) Repeat steps 2 to 5 without "language="javascript" related
error messages.
8) Run koha QA test tools.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This allows the search box to be replaced by some custom HTML, useful
when you're needing to integrate with some other search system, and
don't want to maintain a template change across upgrades.
Test plan:
* Install patch
* Look at the OPAC, see that nothing has changed.
* Change the OpacCustomSearch syspref to something like <h1>Zuul</h1>
* Look at the OPAC again, you can no longer search, there is only Zuul.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Works as advertised. Seems like it would be really easy to screw up your
OPAC with this feature, but since we already offer other easy ways to
screw up your OPAC I guess this fits in.
New patch changes: removed the bootstrap code, changed the entry in
syspref.sql
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and tests.
The feature has some limitations, described on the bug.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As bugs 12724 and 12726 did on OPAC, this patch adds similar changes to
Intranet Results and Details XSLT view. It shows information from tag 264 on
the Publisher line of Intranet Results and Detail.
Test plan (see also bug 12742 and the rules mentioned there):
[1] Add tag 260 and some 264s to your MARC21 record.
[2] Check the display of Intranet Results.
[3] Check the display of Intranet Detail.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Results and detail show 264. I added 2 but only shows the second,
is that right?
[Reply from marcel:] Yes. Based on the rules described, it picks the most
'appropriate' 264.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Only first 20 invoices were displayed on the page. Without pagination, DT
did not allow to show others.
This page explicitely removes the pagination option in order to display
all invoices on the page.
Test plan:
1/ Create 21+ invoices
2/ Go on acqui/invoices
3/ Verify all invoices are displayed.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a regression introduced (by me)
on Bug 12673.
I adds the code needed to display properly all fields
To test:
1) Check that 'AcqCreateItem' syspref is set to 'placing an order'
2) Satage a file with some items
3) Go to a Vendor, create a basket, clic add from staged file, select your file
4) On 'Item information' tab fields are displayed wrong
5) Apply the patch
6) Reload, display must now be fixed
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Use the shibbolethAuthentication syspref to enable Shibboleth authentication
- Configure the shibbolethLoginAttribute to specify which shibboleth user
attribute matches the koha login
- Make sure the OPACBaseURL is correctly set
BUG8446, Follow-up: Adds Shibboleth authentication
- Fix logout bug: shibboleth logout now occurs only when
the session is a shibboleth one.
- Do some refactoring: getting shibboleth username is now
done in C4::Auth_with_Shibboleth.pm (get_login_shib function)
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds redirect to opac after logout
BUG8446, Follow-up: Adds Shibboleth authentication
- Shibboleth is not compatible with basic http authentication
in C4/Auth.pm. This patch fixes that.
BUG8446, Follow-up: Adds Shibboleth authentication
- Use ENV{'SERVER_NAME'} instead of syspref OpacBaseURL in order to work with
multiple vhosts.
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds missing protocol for $ENV{'SERVER_NAME'}
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the feide idp.
- LDAP login and logout are working
- local login/logout are still working
- CAS login/logout are still working
Instructions for setup can be found on the wiki:
http://wiki.koha-community.org/wiki/Shibboleth_Configuration
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The previous update to the Athens County Public Libraries link was
incorrect. It is preferable to point to our library system's home page
rather than our OPAC. If any change is necessary it is to update the
name from the old "Nelsonville Public Library" to the new "Athens County
Public Libraries."
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you search the catalog and click new from z39.50, your term is put in
the search popup. Doing the same thing from the cataloging search no
longer works.
Test Plan:
1) Do a cataloging search
2) Click "New from Z39.50/SRU"
3) Note you get a blank search form
4) Apply this patch
5) Repeat steps 1-2
6) Note the search time is now pre-populated
Signed-off-by: Veronica Lencinas <verolencinas@yahoo.com.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some scripts pass a template variable to facilitate an alternate table
row class for styling. Other use the 'IF (loop.odd)' construction. I
think we're at the point where the CSS3 :nth-child() selector is
widely-supported enough that we can do without template-based solutions:
http://caniuse.com/#feat=css-sel3
This patch adds such a selector to the staff client CSS and removes the
corresponding template markup from Administration pages. The last in
this series of patches will remove the redundant CSS.
Also in this patch: a few minor markup corrections.
To test, apply the patch and clear your browser cache if necessary. View
the following pages and confirm that alternate table row highlighting
works as before:
- Administration -> Budgets
- Acquisitions -> Vendor -> Contracts
- Administration -> Budgets -> Budget -> Planning
- Administration -> Authority types
- Administration -> Authority types -> MARC structure
- Administration -> Authority types -> MARC structure -> subfields
- Administration -> MARC bibliographic framework
- Administration -> MARC bibliographic framework -> MARC structure
- Administration -> MARC bibliographic framework -> MARC structure -> Subfields
- Administration -> Libraries and groups
- Administration -> Cities and towns
- Administration -> Classification sources
- Administration -> Circulation and fines rules
- Administration -> Currencies and exchange rates
- Administration -> Item types
- Administration -> Koha to MARC mapping
- Administration -> System preferences -> Local use
- Administration -> Z39.50 client targets
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test
1/ In Acquisitions > Create a test Budget
2/ In the Budget > Create at least three Test Funds
3/ Create at least three Users who use the fund
4/ Select Search for Basket User
5/ In the Table results list see the list of users and see the alternate table highlighting
6/ Apply the patch
7/ Refresh the Search for Basket User results window
8/ In the Table results list see the list of users and see the alternate table highlighting in place
9/ Bug fixed
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch remove borrowernumber from the borrower list fields and
display the field list in the notes.
Test plan:
- verify that the list of fields is displayed on the right (Notes).
- verify the borrowernumber is not displayed anymore in the field list.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Confirmed that this patch removes borrowernumber from list of default
values, and reintroduces missing list of CSV columns in the Notes field.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This doesn't appear to be affecting anything negatively, but the fix
makes it more correct.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch updates MARC21 frameworks to Update No. 18 (April 2014)
Also updates values on database for MARC21 installs.
To test
1. Apply the patch
2. Run updatedatbase.pl, check that runs without error
3. Remove default framework, load again. Check that loads without
error.
4. Verify changes
Bibs
007/04 Sound recording -> q Quadraphonic, multichannel, or surround
347f -> Encoded bitrate
110/1,610/1,710/1,810/1 subfield c -> repeatable
Auth
110/1,410/1,510/1,710/1 subfield c -> repeatable
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Checked changes are according to documentation from LOC and
consistent between sample files and updatedatabase.pl.
No problems found, all English frameworks were updated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added server-side validation and feedback to Koha news.
TEST PLAN
---------
1) Log in to staff client as someone who can add news
2) Paste a variation of the ugly following URL into your
address bar:
https://demo.library-admin.kohasystem.ca/cgi-bin/koha/tools/koha-news.pl?op=add&lang=&branch=&title=&from=&to=&number=&new=
-- A blank news item is added without warning!
3) Apply patch
4) Repeat step 2
-- "ERROR: Required news title missing!" is displayed
and no blank news is added
5) run koha qa test tools
Followed test plan, Error message appears as expected, qa test tool: OK
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch marks the title field as 'required' and it is not
longer possible to store a news without having at least a title.
To test:
Got to Tools->News
Create news or edit existing news
Field "Title" should have a red label and should be marked as "required"
It should not be possible to save with empty field "Title"
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Only keeps the user from doing it.
Fails to handle the fake the url call case.
https://demo.library-admin.kohasystem.ca/cgi-bin/koha/tools/koha-news.pl?op=add&lang=&branch=&title=&from=&to=&number=&new=
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Only 20 first are listed, others are hidden.
Test plan:
- Create at least 21 basketgroups
- verify you can see it on the "open" tab
- close all of them
- verify you can see it on the "close" tab
There is no restriction to hide datables functions here.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The MARC preview feature seems to have been broken by Bug 11570 -
Upgrade jQueryUI to the latest version. When that patch was being
developed there were no existing cases where the jQueryUI dialog feature
was used, so the patch omitted it.
Rather than update the build of jQueryUI to include the dialog feature
I'm submitting a patch which uses a Bootstrap modal instead. This keeps
the jQueryUI library smaller and avoids an unnecessary duplication of JS
functionality. It also helps keep our modals consistent.
The implementation uses progressive enhancement principles to improve
click handling: Real links in the table, so that the preview link can be
opened in a new tab if the user chooses; Event handling in the
JavaScript instead of the markup ( $(selector).on(click... instead of <a
onclick=...).
To test, apply the patch and add or view a batch of staged MARC records
(Tools -> Staged MARC management). In the list of titles (the "Citation"
column) click any link and confirm that the MARC preview loads
correctly. Confirm that previews work correctly on any page and after
re-sorting.
Confirm also that the modal window flexibly handles different browser
window sizes.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This minor follow-up revises the language a bit: Adding missing question
marks and using the more standard prompt "Please select at least one..."
To test, follow the previous test plan and confirm that the prompts are
improved:
- go on the suggestion management page
- don't select any suggestion and try to delete (check the checkbox and
submit the form). Verify that you get an alert.
- select 1 suggestion and delete it, verify you get a confirmation
message
- select 1+ suggestions and delete it, verify you get a confirmation
message
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the suggestion management page, the librarian can choose to delete
suggestions but no confirmation is needed.
This could produce unexpected lost of data.
Test plan:
- go on the suggestion management page
- don't select any suggestion and try to delete (check the checkbox and submit the form).
Verify that you get an alert.
- select 1 suggestion and delete it, verify you get a confirmation
message
- select 1+ suggestions and delete it, verify you get a confirmation
message
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes hardcoded descriptions and sets them in the templates
using the variable content as id.
To test, create a new guided report and verify the 'module to report on' dropdown
shows as usual [1]. Functionality shouldn't get changed.
The patch also changes the dictionary pages where 'area' should be displayed/selectable
with the same strings as the guided reports. Try all the possible disctionary pages.
The last page when creating a dictionary now shows the 'area description' instead of the
code. The same happens to the dictionary list once you have dictionaries saved.
[1] The following texts get changed:
Catalogue -> Catalog
Acquisition -> Acquisitions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
After applying Bug 12899, in moremember page, checkouts table has
misplaced columns.
Test plan:
1. Check out title for a user. Columns in Detail page at checkout tab
are misplaced; there's no Due date column.
2. Aplly patch, everything shuld look fine now.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
My bad! Thanks for catching this.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On intranet results page, the callnumber of items is a search like :
/cgi-bin/koha/catalogue/search.pl?idx=callnum&q=[% result.itemcallnumber |url %]
The callnumber should be URI-escaped to avoid special URI characters like & , ? ...
If the callnumber contains some CCL words or parenthesis, the search will fail, it should be wrapped with double-quotes.
This patch adds this to catalogue/results.pl and catalogue/shelves.pl :
- uri TT filter instead of url
- adds double-quotes using there URI code %22 since its in a HTML attribute using double-quotes
Test plan :
- Edit an item callnumber with : & ABC 123
- Index zebraqueue
- Perform a search returning this item
- Click on the callnumber
=> Without this patch you get no result, because URL parameters are : idx=callnum&q=& ABC 123
=> With this patch you get results
- Set syspref QueryWeightFields off (because this is no bug if on)
- Edit an item callnumber with : AB(C) AND OR
- Index zebraqueue
- Perform a search returning this item
- Click on the callnumber
=> Without this patch you get no result, because the search contains CCL words "OR" and "AND"
=> With this patch you get results
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested all with and without queryweightfields -
all searches from clicked call numbers for given callnumbers fail without the patch, all are successful with the patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When editing an existing SQL report the page title and breadcrumbs are
incomplete:
Home > Reports > Guided reports wizard >
This patch corrects this.
To test, apply the patch and edit an existing SQL report. The page title
and breadcrumbs should be more complete:
Home > Reports > Guided reports wizard > Saved reports > Edit SQL report
Patch behves as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch resolves the ambiguity of the word "Checked" for Z39.50
server administration.
To test:
Apply patch
In staff client, go to Home:Administration:Z39.50/SRU servers
Result: Column heading of 6th column should show "Preselected" (instead
of "Checked")
Edit or create new server for Z39.50 and SRU
Result: Checkbox underneath "Password" should have label "Preselected
(searched by default):"
Click "Help" at top right of screen
Result: Wording changed for selecting targets as default.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a patron is allowed to add a future date for the hold using the
"Hold starts on date" field, that patron can put a date in that is
in the *past* which will cause them to move to the top of the holds
queue ( assuming they make the past date far enough back that it is
earlier than all the other hold dates ).
Test Plan:
1) Enable future holds
2) Note you can use dates in the past for "hold starts on date"
3) Note you can use dates in the past for "hold expires on date"
4) Apply this patch
5) Refresh the page
6) Note you can no longer use dates in the past for those fields
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed subject: OpacAllowHoldDateInFuture to AllowHoldDateInFuture
as this fix applies to staff.
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Automatic renewal is the second feature sponsored by the hsg.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the introduction of the new automatic renewal feature global syspref
AllowRenewalLimitOverride is expanded in meaning. It now gives the option
to override blocks if:
- the number of allowed renewals is exceeded
- the renewal is premature (No renewal before)
- the item is scheduled for automatic renewal
- the renewal is premature and the item is scheduled for automatic renewal
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the new renewal errors 'auto_renew' and 'auto_too_soon'
to the renewal interface.
To test:
1) Issue two items:
- one with automatic renewal and no value for "No renewal before"
- another with automatic renewal and a value for "No renewal before"
2) Try to renew:
Home > Circulation > Renew
3) Confirm there are error messages explaining that the items have been
scheduled for automatic renewal and that one of the renewals is also
premature.
4) If global syspref AllowRenewalLimitOverride is set to "Allow" you
should be given the option to override.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox for "Automatic renewal" to the checkout page.
CanBookBeRenewed is modified to include two new errors:
- auto_renew (renewal shouldn't be done manually)
- auto_too_soon (renewal is premature and shouldn't be done manually)
To test:
1) Add or edit an issuing rule with "Automatic renewal" and another
one without it.
2) Issue at least three items:
- automatic renewal by issuing rule
- automatic renewal by Checkbox on the checkout page
- no automatic renewal
3) Test the following steps for both:
Home > Circulation > Checkouts
Home > Patrons > Patron details
4) Confirm that issues with automatic renewal cannot be renewed manually,
even if there are still renewals left and it's not too soon to renew.
5) Confirm that "Scheduled for automatic renewal" and the remaining
renewals are displayed. If no renewals are left "Not renewable" should
be displayed.
6) Confirm that issues without automatic renewal behave as usual.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a column "Automatic renewal" to the circulation and
fine rules table.
To test:
1) Add or edit some issuing rules.
2) Confirm that "Automatic Renewal" is set to "No" by default and
can be switched to "Yes".
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The sort order of the "today's checkouts" and "previous checkouts" row
groupings depends on the label, so in English "today's checkouts" comes
first. However, in other languages the reverse alphabetical order is
incorrect resulting in "previous checkouts" coming first.
This patch adds a dummy column with numeric data on which the sorting
can be done. This should make it translation-agnostic.
To test, apply the patch and install or update a translation which will
demostrate the problem (sv-SE for instance).
- Clear your browser cache and switch to the English templates.
- Check out some items to a patron who has checkouts from a previous
day.
- Confirm that the sorting of the "today's checkouts" and "previous
checkouts" row groups is correct.
- Switch to the new/updated translation and reload the circulation page
for that patron. Confirm that the sort remains correct.
- Confirm that the checkouts table looks correct and that other features
(sorting, checkboxes) still work correctly.
Revision: Corrected the table footer include to correct the colspan
error causing column misalignment.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In case when the staff user doesn't have (circulate) ->
(override_renewals) permission granted, this code part
var AllowRenewalLimitOverride = [%
CAN_user_circulate_override_renewals && AllowRenewalLimitOverride %];
in circ/circulation.tt and members/moremember.tt leads to javascript
error, because TT statement evaluates to empty string.
To reproduce:
- set AllowRenewalLimitOverride syspref to "Don't allow" (this step is
possibly redundant / not quite relevant),
- for testing purposes, log in as some (sample) staff user whitch does
not have permission granted for "(override_renewals) Override blocked
renewals",
- have a look at some patron accounts (preferably, ones with 1+
check-out), observe that page layout is incorrect in "Check Out" and
"Details" tab.
To test:
- apply patch,
- retest and ensure that this issue is no longer reproductible,
- make sure that there are no regressions of any kinds regarding renewal
override permission for staff users (i.e, that it still works like
intended).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that Firefox date parser doesn't like our dates which are
formatted in ISO format like "2014-08-06 00:00:00". This results in
missing red color in overdue dates.
So intead of munching different date formats and JavaScript (and having
to support different browers) this patch moves check for overdue dates
back to mysql and just transfers boolean value to JavaScript so it can
show correct class for date_due.
Test scenario:
1. find borrower with overdue checkouts
2. verify that all dates are black (and are in ISO format)
3. apply this patch
4. reload page and verify that overdue dates turned red
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with different due dates (hourly and not) and different date formats.
Passes tests and QA script.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The staff client's XSLT results view does not respect the choice set in
the IntranetBiblioDefaultView system preference. This patch adds a check
of the preference to the staff client's results view for MARC21.
To test you must have the staff client configured to use the XSLT view
for search results. Perform any search and test the link to a title's
detail page. Switching the value of the IntranetBiblioDefaultView
preference should be correctly reflected in the search results links.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors.
Only for MARC21 :(
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Reports home should show the same report name (i.e. "Patrons with the most checkouts")
the report itself uses. It is chosen as it is more idiomatic.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes some changes to the way filter information is displayed
after running the patrons with the most checkouts report. Before this
patch several untranslatable English strings would be displayed, and
library and item type codes would be shown instead of descriptions.
To test, go to Reports -> Patrons checking out the most. Enter values
for all the filter options:
- Checkout date from
- Checkout date to
- Checkin date from
- Checkin date to
- Library
- Item type
- Patron category
When you submit the form and view the results you should see your date
submissions formatted according to your selected dateformat system
preference. The library name and item type names should be shown instead
of codes.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves translatability of the filters output after running
the report and the readability of them (removing codes).
Note: it would be nice if the read-only would be removed from the date
fields, as forcing people to use the date widget is a known accessibility
issue.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Set opacuserlogin and OPACPatronDetails to allow
- Log in to OPAC, go to 'your personal details'
- Change Home library
- Go to staff client: Patrons requesting modifications (/cgi-bin/koha/members/members-update.pl)
- Without patch, you do not see the change request, but can Approve, Deny or Ignore it
- With patch, you see the change request, indicating the Home library (branchcode)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I "slightly" rewrote the patch so it applies on current master.
To test:
- Go to Acquisitions, select a bookshop and a basket, click 'Add to basket':'From an external source'
- Do a search
- Your search terms should display at the top of the results page.
- Repeat search with several combinations of search terms (with and without results).
- Check the output for correct html.
Fields Raw (any) and Standard ID removed / MV
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script, works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Go to Z39.50/SRU servers, click Help and read the text.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Additions to help file, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes empty onclick attribute from memberentrygen.tt
To test:
Apply patch.
Use git grep 'onclick=""' to make sure that there are no more empty onlick attributes
Go to Home > patrons and click 'New patron'
Check HTML of 'Cancel' link
Make sure that 'Cancel' link still works
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes the link to cancel adding a manual restriction.
No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes several capitalization issues in the about page.
To test:
- Go to the about page
=> FAIL: you should see
* Server Information (tab)
* Koha Team (tab)
* Koha Timeline (tab)
* Additional Thanks To... (at the bottom of the Koha Team tab
- Apply the patch and reload
=> SUCCESS: you should see
* Server information
* Koha team
* Timeline
* Additional thanks to...
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String changes, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Go to cataloguing
- Perform a z39.50 search with no results
- Check "Try another search" is displayed
- Perform a z39.50 search with results
- Verify display is correct as well.
Signed-off-by: George Williams <georgew@latahlibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
