To test:
1. Apply patch, restart_all
2. Check some items out and prepare some reasons that would initiate a branchtransfer. According the schema it can be any of the following: 'Manual', 'StockrotationAdvance', 'StockrotationRepatriation', 'ReturnToHome', 'ReturnToHolding', 'RotatingCollection', 'Reserve', 'LostReserve', 'CancelReserve', 'TransferCancellation', 'Recall', 'RecallCancellation.
3. CHeck in some the items and notice the 'Transfer reason' column in the table. Make sure the reasons are acurate and make sense.
4. To go Table settings and find the 'checkedintable'. Make sure you can properly hide the column from the display.
Signed-off-by: AndrewA <andrew.auld@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the late orders page so that the table of
information contains a column for basket creation date. This will allow
administrators to configure the table to sort by default on basket
creation date if they wish.
To test, apply the patch and restart services.
- Go to Acquisitions -> Late orders.
- The table of late orders should include a column labeled "Basket date"
showing the basket creation date.
- The dates should be formatted correctly and the column should sort
correctly.
- Go to Administration -> Table settings and navigate to the settings
for the lateorders page.
- Try changing various settings for the table to confirm that everything
works correctly, including setting the default sort to use the basket
date column.
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Enable the advanced cataloging editor
2 - Edit record 369 in the advanced cataloging editor
3 - On load, get a notice that there were issues and to check logs
4 - Save record
5 - Close and reopen in editor
6 - Confirm warning is gone
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an eval to the call for the record form metadata
If there is an error we catch it, display it, and attempt to strip bad characters from the record
To test:
1 - In koha testing docker attempt to view record 369 in the staff interface
2 - You see a warning about degraded view
3 - Attempt to edit the record
4 - Internal server error
5 - Apply patch, restart all
6 - Reload the editor
7 - Record successfully loads!
8 - You have a warning about encoding issues!
9 - Save the record
10 - No more warning!
11 - Edit again, no more warning!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan, k-t-d:
1) Install FreeForm and enable ILLmodule, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Install an ILL availability plugin (e.g. pubmed):
https://github.com/PTFS-Europe/koha-plugin-api-pubmed/releases/tag/1.1.1
3) restart plack:
koha-plack --restart kohadev
4) Create a new ILL batch, visit:
/cgi-bin/koha/ill/ill-requests.pl
5) Click '+New ILL requests batch'
6) Input a name, '42' on the cardnumber and pick a library. Click 'Continue'.
7) On the identifiers textarea, insert '123' and click 'Process identifiers'
8) After the metadata has been retrieved, click the bottom 'Add items to batch' button, click 'Finish and view batch'
10) Go back to ILL requests table, visit:
/cgi-bin/koha/ill/ill-requests.pl
11) On the top right of the table, click 'Columns' and enable Batch
12) Notice the batch column now shows correctly and is clickable
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The JavaScript in both OPAC and staff interface for submitting catalog
concerns contains English strings which are not properly wrapped with
the __() function to allow for translation. This patch fixes both
affected files.
The patch also modifies the dialog classes used in the staff interface
so that the messages are styled consistently.
To test, apply the patch and update a translation, e.g. fr-FR:
- perl misc/translator/translate update fr-FR
- Edit the updated po file for the language you chose, e.g.
misc/translator/po/fr-FR-messages-js.po, to fill in translated
strings for the two catalog concern entries. For example:
koha-tmpl/intranet-tmpl/prog/js/modals/add_catalog_concern.js:38
koha-tmpl/opac-tmpl/bootstrap/js/modals/catalog_concern.js:55
msgid "Your concern was sucessfully submitted."
msgstr ""
- Install the updated po file:
- perl misc/translator/translate install fr-FR
- Enable the translation if necessary under Administration -> System
preferences -> language.
- Enable the "opaclanguagesdisplay" preference if necessary.
- Enable the " CatalogConcerns" preference if necessary.
- Locate a bibliographic record in the staff interface and view the
detail page
- From the toolbar, choose New -> New catalog concern.
- Test submitting the form. When the form is submitted a message
should display on the page: "Your concern was sucessfully submitted"
- Perform the same test in the OPAC, where the "Report a concern" link
is in the right-hand sidebar menu of the bibliographic detail page.
- Perform the same tests, in both OPAC and staff interface, in your
translated language to confirm that the translations show up
correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Changes text from "Place a hold on order" to the more common "Place hold"
* Adds permission check on reserveforothers.
* We were missing table cells in the footer rows of the table.
I would have liked to hide the column for someone missing permissions,
but I failed to get the datatable configuration right with the export
and column configuration settings.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Rename fields to opac*
This patch updates the field names to reflect that they're OPAC
related.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Fix rebase errors
We let some superflous template params creep back in during a rebase
somewhere.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patches addresses issues raised by the QA tests. It also adds a missed import of the Branches file in the document head
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 32721: (QA follow-up) Add missing imports
Missing imports added in three template files
Exec flag added to atomic update file
Tinymce imports removed
A new bug will be created to move codemirror into an inc file at latest
version
Test plan as before
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 32721: Tidy up - duplicate fetching of userjs and css
Currently UserJS and UserCSS is injected into the template as a parameter through Auth.pm but is then fetched using Koha.Preference() in the template. This patch tidies this up by removing the parameters from Auth.pm
Test plan as per first commit
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows for branch specific userJS and userCSS to be added through the libraries table. This works in conjunction with the global UserJS and UserCSS functionality and allows for multiple OPACs with different css and js options.
Test plan:
1) Add to apache conf (/etc/apache2/sites-available/kohadev.conf)
SetEnv OPAC_BRANCH_DEFAULT "FFL"
RequestHeader add X-Koha-SetEnv "OPAC_BRANCH_DEFAULT FFL"
2) In the container, run restart_all
3) Navigate to the OPACUserJS and OPACUserCSS system preferences and add the following: OPACUserJS - console.log('Hello from global sysprefs');, OPACUserCSS - 'body { background-color: black; }'
4) Refresh the OPAC and the background should be black and the message should be logged to the console in developer tools
5) Navigate to Administration > Libraries
6) On the Fairfield branch (if this does not exist you will need to create a branch with a code matching the code that you added to the apache conf file), click edit
7) At the bottom there should be two fields to add userjs and usercss, complete with Codemirror syntax checking
8) In userjs add console.log('Hello from branch level'); and in usercss add 'body { background-color: blue; } then save
9) Return to the OPAC and refresh
10) If you are logged out of the OPAC it should now be logging both the message from global and from the branch level and the background should be blue (if not you will need to log out)
11) Log back into the OPAC using a user that DOES NOT have a default branch matching the branch you added to the Apache conf
12) The OPAC should now revert to only showing the global message in the console with a black background
Sponsored-by: PTFS Europe
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. From BorrowerUnwantedFields Hide Gone no address flag (gonenoaddress) and Lost card flag (lost).
2. Got to memberentrygen.tt and see that Patron restrictions is now hidden
3. Apply patch, now the Patron restrictions field should not be hidden.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The options defined for the OpacShowSavings system preference contain
HTML: "on patron's checkout history page (the system preference
<em>opacreadinghistory</em> must be enabled)". This text ends up in an
<option> tag, and even though the form is rendered using the
multiple-select plugin the HTML still won't render and should
be removed.
To test, apply the patch and restart all.
- Go to Administration -> System preferences and search for
"OpacShowSavings"
- Check the dropdown of options on the preference. The system
preference names referred to should now be single-quoted instead of
wrapped in visible <em> tags.
- Confirm that the preference still works correctly.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan, k-t-d:
1) Install FreeForm and enable ILLmodule, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Install an ILL availability plugin (e.g. pubmed):
https://github.com/PTFS-Europe/koha-plugin-api-pubmed/releases/tag/1.1.1
3) restart plack:
koha-plack --restart kohadev
4) Create a new ILL batch, visit:
/cgi-bin/koha/ill/ill-requests.pl
5) Click '+New ILL requests batch'
6) Input a name, '42' on the cardnumber and pick a library. Click 'Continue'.
7) On the identifiers textarea, insert '123' and click 'Process identifiers'
8) After the metadata has been retrieved, click the bottom 'Add items to batch' button, click 'Finish and view batch'
9) You should now be seeing 'View ILL requests for batch <batch_name>' with the request you just added.
10) Click the request id (or the 'Manage request' button)
11) Notice you can view the request correctly, the batch it belongs to shows correctly and is clickable
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Install FreeForm and enable ILLmodule, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
2) Visit /cgi-bin/koha/ill/ill-requests.pl
3) Create 'New ILL request'
4) Select the request type, input cardnumber '42' and select a library
5) Hit 'Create'
6) Notice the request now creates successfully
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Install FreeForm and enable ILLmodule, run:
bash <(curl -s https://raw.githubusercontent.com/ammopt/koha-ill-dev/master/start-ill-dev.sh)
Visit /cgi-bin/koha/ill/ill-requests.pl
Notice the table now renders correctly
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects errors raised by the new stylelint configuration in
staff-global.scss. Many of the fixes were made automatically by using
the "--fix" option:
npx stylelint koha-tmpl/intranet-tmpl/prog/css/src/staff-global.scss
--fix
Some examples of errors found:
- Expected single space after ":"
- Expected single space after "("
- Expected single space before ")"
- Expected empty line before comment
- Expected no more than 1 empty line
- Expected a trailing semicolon
Manual fixes include replacing named colors with hex codes, combining
duplicate selectors, removing empty blocks, etc.
Some warnings remain: "Unexpected !important" requires more than a
quick fix, if we should choose to address them.
To test, apply the patch and rebuild the staff interface CSS:
https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client
The changes affect CSS all around the staff interface, but there should
be no visible results of the patch. Everything should look correct.
The stylelint check should return only warnings about "!important"
npx stylelint koha-tmpl/intranet-tmpl/prog/css/src/staff-global.scss
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in order to clarify labels in forms
and on table columns.
To test apply the patch and go to Administration -> Authority types ->
MARC structure.
- The second column should now be labeled "Tag description."
- Click "Edit" on one of the tags.
- The description fields should now be labeled "Description in staff
interface" and "Description in OPAC."
- Return to the list of tags and choose Actions -> Subfields for one of
the tags. The second column should read "Description."
- Click "Edit" on one of the subfields.
- The description fields should now be labeled "Description in staff
interface" and "Description in OPAC."
Go to Administration -> MARC bibliographic framework -> MARC structure.
- The second column should now be labeled "Tag description."
- Click "Edit" on one of the tags.
- The description fields should now be labeled "Description in staff
interface" and "Description in OPAC."
- Return to the list of tags and choose Actions -> Subfields for one of
the tags. The second column should read "Description."
- Click "Edit" on one of the subfields.
- The description fields should now be labeled "Description in staff
interface" and "Description in OPAC."
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
It's needed since bug 34369 to POST to the syspref route
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In case the logged in user does not have manage_sysprefs we should no
display the form in the settings.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To retrieve the sysprefs, instead of using the svc script. See bug
33606.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To match what has been done on bug 33169 and bug 34418.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adjust code to match changes done by bug 32932.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 33417 has changed how we handle the toolbars in Vue apps, this patch
is adjusting the 'Preservation' module code on top of it, but also adds
to make it more flexible (see bug 34215).
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Do not stay on the show train view.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a AV category is renamed or deleted, the app will freeze with
"TypeError: av_match is undefined"
To prevent that we add an check to prevent the freeze and a warning in
the settings.
We could eventually add a FK on option_source, but the idea was to let
it flexible in case we want to add another source.
This bug can be considered a configuration error anyway.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: BULAC - http://www.bulac.fr/
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If items with different processings are in a train, there is only the "edit" action button.
It's missing "Remove" and "Copy".
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: BULAC - http://www.bulac.fr/
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We want opened, closed, sent, then finally received trains.
But ordering by desc for opened, and asc for the others.
Which means the last opened will be first, but the closed, send and received will display oldest first.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: BULAC - http://www.bulac.fr/
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Technical notes: Ideally we would have split TrainsFormAddItem to make some part
reusable, but it turned out into a complicated component that would have
been hard to maintain. It seems easier to have two different components.
Ideas to improve this area are welcome!
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: BULAC - http://www.bulac.fr/
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a value is not in the AV list, or if it differs slightly, they would
like to force the modification of the value, without creating a new
authorised value.
Note that this could be a candidate for an option at the attribute
level if there are different needs (ie. for some attributes we don't
want to allow an other value).
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: BULAC - http://www.bulac.fr/
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is not working as it, but we are going to fix the problem when
working on the "Set default values for items added in batch to a train"
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: BULAC - http://www.bulac.fr/
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It does not seem useful to enforce it at lower level, it is not a
condition that will break the feature, but it does not feel correct to
allow the modification of this value
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: BULAC - http://www.bulac.fr/
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit contains the main commit message
The description of the original need is described in documents attached by the sponsor on the bug report specifically "[En] Preservation module - Main principles".
The idea is to develop a whole new module to track the status of the documents that are sent for processings/treatments in order to preserve them (eg. covering).
This is a first step, more are certainly coming later.
The author and sponsors have worked for several months before providing this MVP version. The different discussion and needs can be found at https://tree.taiga.io/project/joubu-koha-preservation-module/kanban
Some ideas of the next steps are also listed.
The first iterations have been done using the classic .pl/.tt Koha style but we finally switched to a new Vue module, for more fun.
These patches made the following main changes:
New files
* Koha objects under Koha/Preservation
* REST API controllers under Koha/REST/V1/Preservation
* preservation/home.pl and preservation/home.tt
* Vue components under js/vue/components/Preservation
* tests under t/db_dependent/Koha/Preservation and t/db_dependent/api/v1/preservation_*
* Cypress tests under t/cypress/integration/Preservation
DB:
* 3 new sysprefs PreservationModule, PreservationNotForLoanWaitingListIn, PreservationNotForLoanDefaultTrainIn
* 1 new permission "preservation" (will be split into subpermissions later)
* 5 new tables:
- preservation_processings
- preservation_trains
- preservation_processing_attributes
- preservation_trains_items
- preservation_processing_attributes_items
Terminology and workflow:
*Processings* are the different treatments an item can receive during its stay in the preservation module
A *processing* is defined by a list of *attributes*. To make the module as easy to use for the librarians in charge of the preservation area a list of processings will be defined when the module will be set up. An *attribute* is a name and a value. That's it. However it also has a type, to define what the value is coming from: *free text*, *authorised value* or *database column*.
For instance if you are defining a processing that will handling the book cover you could have 3 *attributes*:
- first named "Barcode" that will be automatically filled with "items.barcode" (type *database column*"
- second attribute named "color" linked with a new PRES_COLOR authorised value category you would have previously defined with "red", "blue", "green", etc. (type *authorised value*)
- third attribute named "notes", because librarians like notes (type *free text*)
Important: Even if the attribute is linked with a DB column or AV category, the value will be automatically pre filled but will stay editable (could be a config option to restrict the edition, later, if needed).
The *status* of an item will change during the preservation process. First it will arrive in the preservation area and be on a *waiting list*. It is not processed already but is not available anymore for the patrons of the library. That's why we are going to use the "not for loan" (items.notforloan) value for this. This *waiting list* is a fictional concept, it simply lists all the items in the library with a specific *status*.
A *train* is... how they call that at the BULAC, a train (same in French!). And we quite like the word so we kept it. It is what it is: a list of items/waggons, one after each other. We could have picked "cart", "list", but the concepts were already used in different places. We are not strongly attached to the term and it can be modified (but it's spread all over the code already and will be tedious to modify!) if you have a very good suggestion :)
So, a *train* is where items are going after they have been sent to the waiting list. It's a stack of items that will be sent to a provider. When you create a new train you will be asked for the "Status for item added to this train", that will be the "not for loan" value to set to the items added to this train, and a "Default processing" that will be the processing used. But keep in mind that a train can have items that have different processings (specific case, will see later).
When all items have been added to a *train*, you can *close* it. You cannot add items anymore to it! Then you can *send* it, and finally *receive* it. They are just statuses to keep track of the dates, and filter trains by status.
However when a train is received you can *copy* an item to another (opened) train. It means that you have the item on hand but something went wrong, you are not happy with the work done by the supplier and want to send it back, so you create a new train (that can have different items, and it is the case where you will have items in a train that don't all have the same processing!).
Test plan:
A. Prerequisites
0. Just `reset_all` and jump to B, or:
1. Apache configuration
You will need to edit /etc/koha/apache-shared-intranet-git.conf and add the following lines after the RewriteRule for erm (line.24?)
RewriteCond %{REQUEST_URI} !^/cgi-bin/koha/preservation/.*.pl$
RewriteRule ^/cgi-bin/koha/preservation/.*$ /cgi-bin/koha/preservation/home.pl [PT]
The RewriteCond is only useful if you are testing the "print slips" bugs as well, but it cannot hurt to have it!
2. `yarn js:build` to regenerate the Vue app for the preservation module
3. `updatedatabase`
4. `restart_all`
B. Settings
0.
Create 2 different values for NOTLOAN, eg. 'In preservation' and 'In preservation external'
Create different authorised values for a new category, eg. PRES_COLORS: RED, BLUE, GREEN. Feel free to create more categories.
1. You can turn on the "PreservationModule" syspref and go to the Koha homepage to see a new "Preservation" link
2. You landed on the empty home page of the preservation, no worry! We need to fill this page with useful information! (see #2 on the kanban)
3. Go to settings
4. Set "Status for item added to waiting list" to "In preservation"
and "Default status for item added to train": "In preservation external"
Create a new processing and define some attributes. Ideally at least one of each type.
5. Go to "Waiting list" and add some items
6. Go to "Trains" and create several trains (at least 2). Notice that the "Status for item added to this train" value is set to the value defined in the settings, but can be modified. Notice that this status can be set when a train is created but it won't be possible to edit later.
7. Add items to a train. You can only add items that are already in the waiting list. Add values for the attributes. Notice that the attributes linked with a database column are automatically pre filled. Notice that attributes linked with an authorised value are displayed with a dropdown list but that a different value can be set (remember, this is a feature!). Notice that attributes can be multivalued.
8. Add other items to the waiting list, notice the "Add last X items to a train" link at the top of the waiting list table, click it
9. You can now add several items to a train, directly (for instance if you don't really need to pass through the waiting list). Values can be set for the batch, but attributes linked with a database column are not editable (they will be prefilled automatically)
10. Once you have a train with several items, look at the "show train" view and notice the item list. If all of them are using the same processing then a table is displayed, one column per attribute. However if at least one item of the train has a different processing then the items are not listed in a table.
11. Edit items and confirm that the values are correctly saved.
12. Close, send and receive a train
13. Once a train is closed you can no longer add items to it
14. Once a train is received notice that you can "copy" an item to another (opened) train
QA notes:
The patch is huge! New enhancements and improvements have been moved to separate bug reports but this cannot be split. We need a ground base to build on top.
The size is mainly coming from Vue components, Koha::Objects, REST API controllers and specs, and tests. Nothing hard ;)
More to come:
- See the kanban!
- Print slips (bug 33547 and bug 34030)
- Put something on the landing page!
- Link with the acquisition module (suppliers, funds, etc.)
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: BULAC - http://www.bulac.fr/
Signed-off-by: Heather Hernandez <heather_hernandez@nps.gov>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Apply patches
2. sudo koha-upgrade-schema <instance>
3. Restart services
4. Set TaxRates syspref = 0.15
5. Create a new fund with amount = 1000
6. Add an order to a basket with the following values:
- Fund = Choose the fund from step #5
- Quantity = 1
- Vendor price = 10
- Tax rate = 15%
- Discount = 20%
- Retail price = 10.00
- Replacement cost = 10.00
- Actual cost = 10.00
- Ensure the basket belongs to a vendor with ("List prices" = "Don't include tax" and "Invoice prices" = "Don't include tax")
7. Go to the Acquisitions home page
8. Confirm the 'Ordered' column for the step #5 fund contains 9.20
9. Click on the 9.20 link and confirm the ordered.pl page that loads
also contains 9.20 as the 'Subtotal'
10. Change 'CalculateFundValuesIncludingTax' = 'Exclude'
11. On the Acquisitions home page confirm the 'Ordered' column now
contains 8.00
12. Click on the 8.00 link and confirm the ordered.pl page also contains
8.00 as the 'Subtotal'
13. Close your basket and receive your order - change the 'Actual costs'
= 8.00 (the $10 retail price less the 20% discount, tax exclusive)
14. Go to the Acquisitions home page and confirm the 'Spent' column now
contains 8.00
15. Click on the 8.00 link and confirm the spent.pl page also contains
8.00 as the 'Subtotal'
16. Change 'CalculateFundValuesIncludingTax' = 'Include'
17. Confirm the 'Spent' column on the Acquisitions home page now shows
9.20
18. Click on the 9.20 link and confirm the spent.pl page also contains
9.20 as the 'Subtotal'
Sponsored-by: Waikato Institute of Technology, New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Waikato Institute of Technology, New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch
2. Have some values in borrowerRelationship.
3. Go to a patron details page and see both 'Show checkouts to guarantor:' and 'Show charges to guarantor:'
4. Now empty borrowerRelationship.
5. Visit the patron detail page again and you should no longer see either of those fields.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch divides the OPAC and staff options into separate optgroups
and adds Select2 for styling and filtering.
THe patch also corrects a few missed instances of "Intranet" in the list
of location options on the entry form.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffSerialsHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the point of sale page.
NOTE: This patch also removes the now defunct database update introduced
in the first patch of the series.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffPOSHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the point of sale page.
NOTE: All the blocks have been placed at the bottom of the home pages
respectively for consistency. However, in this case it doesn't look as
clean as the content above is a form.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffPatronsHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the patrons home page.
NOTE: This one may highlight an issue with Panels directly followed
by page-sections.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffListsHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the lists home
page.
NOTE: This one may highlight an issue with Panels directly followed by
page-sections.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffCataloguingHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the cataloguing home
page.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffAuthoritiesHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the authorities home
page.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new `StaffAcquisitionsHome` block to the HTML
Customisations options. This allows for the addition of a block of
content in a page-section at the bottom of the acquisitions home page.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds customisable HTML text areas to acqui/acqui-home.pl,
authorities/authorities-home.pl, cataloguing/addbooks.pl,
virtualshelves/shelves.pl, members/members-home.pl, pos/pay.pl and
serials/serials-home.pl pages
To test:
1) Apply patch
2) Run updatedatabase.pl
3) Add some html to the new prefs IntranetAcquisitionsHomeHTML,
IntranetAuthoritiesHomeHTML, IntranetCatalogingHomeHTML,
IntranetListsHomeHTML, IntranetPatronsHomeHTML, IntranetPOSHomeHTML
and IntranetSerialsHomeHTML
4) View the Acquisition, Authorities, Cataloging, Lists, Patrons,
Point of Sale, and Serials homepages and confirm that your changes
show. Note that this should display in exactly the same way as it
does in the already extant IntranetCirculationHomeHTML and
IntranetReportsHomeHTML system preferences.
Signed-off-by: Brandon J <brandon.jimenez@inLibro.com>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If we pass an empty array from the perl controller, we retrieve an empty
string from the template, and the merge does not work.
This patch fixes the following bug:
Pick a patron without checkout history
Check them an item out and check it in
=> The table is empty, whereas it should display the item that has been
checked in.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Same as bug 33948 for the OPAC side.
Additionally you will test
* OPACMySummaryHTML
* The different cover images services
* Display of ISBN
* Display of UPC
* Ratings
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the include file used to show actions with each
search result, removing two instances of "onclick" in favor of an event
handler class which was already in use elsewhere.
To test, apply the patch and log in to the OPAC.
- Perform a catalog search which will return results.
- Test the "Save to lists" link under any search result. The "Save to
lists" pop-up window should appear.
- View the contents of a list which contains some titles.
- Test the "Save to another list" control. The same pop-up window should
be triggered.
- Tag at least one title in the catalog and view the "Tag cloud" page.
- Perform the same test with the "Save to lists" button in the table of
our tags.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The change to the authority detail page made by Bug 34075 didn't take
into account the possibility that the DefaultAuthorityTab tab preference
might be empty. This leads to a JavaScript error and no tabs being
shown.
We can avoid this situation by initializing the tab_object variable as
an empty object.
To test, apply the patch and go to Authorities to repeat the test plan
for Bug 34075:
1. Locate and view the detail page for an authority record.
2. The page should default to the 0XX or first tab.
3. Go to Administration -> System preferences and set the
DefaultAuthorityTab preference to a number that won't be found
in your authority record (e.g. there are no 3XX tags defined).
4. Return to the detail page and verify that the first tab is displayed.
5. Set DefaultAuthorityTab to 1XX or greater, one that exists in your
record.
6. Reload the detail page and confirm the correct tab is selected.
7. Test the case where DefaultAuthorityTab is undefined by directly
updating the database. In koha-testing-docker you can run this
command:
echo "update systempreferences set value = 3 where variable = 'DefaultAuthorityTab';" | koha-mysql kohadev
Return to the authority detail tab to confirm that the first tab is
displayed.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the markup of the patron search results table so that
the "actions" column (Edit, Check out) are excluded when using the
DataTables "Export" button. The configuration was already in place but
the column header lacked the required class.
To test, apply the patch and perform a patron search which will return
multiple results.
Click the "Export" control at the top of the patron search results
table and choose "Print." In the print preview there should be no final
column containing "Edit" and "Check out."
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I tried translating it, found it not working and replaced
by the qualif authorised value list with relator terms/codes.
To test:
* Make sure the unimarc_field_700-4.pl is no longer listed in
frameworks.
* Make sure it's not used in the standard frameworks.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The problem is in the patron_messages.inc file on line 25. The variable "expiry" is used, but it should be "patron.dateexpiry" because the patron's card isn't expired yet.
TEST PLAN
1) Go to “Patrons > + New patron”
2) Create a patron with an expiry date that is less than 30 days in the future
3) Go to the "details" tab of this account
4) Notice that the date is missing after "expires on":
"Expiration: Patron's card will expire soon. Patron's card expires on Renew or Edit details"
5) Apply the patch
6) Reload the page; the expiry date should now be displayed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the option of taking the results of a report that
returns borrowernumbers and create a new patron card creator batch with
those results.
The logic of the dropdown menu has been modified in order to ensure that
duplicate patron modification options aren't shown in the menu when a
report return both borrowernumber and cardnumber.
To test, apply the patch and create a new report which will return
patron borrowernumbers, e.g.
SELECT borrowernumber, cardnumber, surname, firstname FROM borrowers
order by RAND() LIMIT 20
- Run your report
- Click the "Batch operations with..." button at the top of the result
- Click "Patron card creator"
- A new tab should open with a new patron card creator batch with the
patrons from your report.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes some updates to the staff interface print stylesheet in
order to make it work better following the staff interface redesign.
To test, apply the patch and clear your browser cache if necessary.
In the staff client, go to various pages and view the print preview. The
print view should exclude the header navigation, header search, page
toolbars and page sidebars.
- Pages with tabbed displays should show content from all tabs: e.g.
bibliographic details, MARC editor.
- In Reports, check that report results print well.
- Pages with DataTables should print with table information visible but
table controls hidden.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects errors raised by the new stylelint configuration in
print.css. Most of the fixes were made automatically by using the
"--fix" option:
npx stylelint koha-tmpl/intranet-tmpl/prog/css/print.css --fix
Some examples of errors fixed automatically:
- Expected indentation of 4 spaces
- Unexpected whitespace before ":"
- Unexpected unit
- Expected single space before "{"
- Expected newline after ";" in a multi-line declaration block
Errors from use of "!important" have been ignored.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Check the transit status of the *hold* in addition to the transit status
of the *item*, to avoid displaying a misleading transit status on
item-level holds when the item is actually in transit for a different
hold
To test:
1. Create a record-level hold for Patron A for pickup at a library other
than the logged-in library
2. Check in an item to fill that hold
3. Put an item-level hold on that same item for Patron B at a different
library other than the logged-in library
4. Open Patron A's and Patron B's account details pages in separate tabs
--> Note that the Holds tab on Patron A's account detail page correctly
shows that their hold is in-transit
--> Note that the Holds tab on Patron B's account detail page incorrectly
shows that their hold on the same item is also in-transit
4. Apply patch
5. Clear browser cache
6. Refresh both patrons' account details pages
--> Confirm that the holds tab on Patron A's account still correctly
says their hold is in-transit
--> Confirm that the holds tab on Patron B's account now correctly shows
a blank status for their hold
7. Cancel Patron A's hold
8. Check in the item again to put it in transit for Patron B's hold
9. Reload Patron B's account page
--> Confirm that the holds tab on Patron B's account now correctly says
their hold is in-transit
Signed-off-by: Katariina Hanhisalo <katariina.hanhisalo@xamk.fi>
Signed-off-by: Tuomas Kunttu <tuomas.kunttu@kouvola.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The anonymous patron details page should show an alert message.
1) Configure an existing borrowernumber in system preference 'AnonymousPatron'
2) Go to details page of this borrower :
/cgi-bin/koha/members/moremember.pl?borrowernumber=x
3) Check you see alert 'This is the anonymous patron.'
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Johanna Miettunen <johanna.miettunen@haaga-helia.fi>
Signed-off-by: Päivi Knuutinen <paivi.knuutinen@joensuu.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The anonymous patron circulation page should show an alert message and not allow check-out.
1) Configure an existing borrowernumber in system preference
AnonymousPatron
2) Go to circulation page of this borrower :
/cgi-bin/koha/circ/circulation.pl?borrowernumber=x
3) Check you see alert 'This is the anonymous patron, so circulation is disabled.'
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Johanna Miettunen <johanna.miettunen@haaga-helia.fi>
Signed-off-by: Päivi Knuutinen <paivi.knuutinen@joensuu.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several OPAC templates so that they
use a new WRAPPER for displaying breadcrumbs.
Apply the patch and log in to the OPAC. Test each of the following pages
and their variations. Breadcrumbs should look correct, and each link
should be correct:
- Navigate to /cgi-bin/koha/ilsdi.pl
- Check a variety of links in the list
- Advanced search
- Locate a bibliographic record and view the ISBD detail page
- View the MARC detail page
- Locate a serial record which has a patron notification notice defined
in its subscription details
- On the detail view under the "Subscriptions" tab, click the
"Subscribe to email notification on new issues" button.
- Confirm the subscription, then when you return to the detail page,
click "Cancel email notification" to check that view as well.
- Authority search
- Perform a search which will return results
- Click the "Details" link on one of the results
- Also view the "MARC view" tab (note that I didn't address the
breadcrumb inconsistency between the normal and MARC view in
this patch).
- Try to view a bibliographic record which is suppressed in the
OPAC. Requires OpacSuppression enabled and OpacSuppressionRedirect set
to "An explanatory page"
- Set the value of 942$n to 1 to suppress it in the OPAC.
- In a system with ElasticSearch enabled, go to "Browse search" (or
navigate directly to /cgi-bin/koha/opac-browse.pl
- With OpacBrowser enabled, go to "Browse by hierarchy."
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several OPAC templates so that they
use a new WRAPPER for displaying breadcrumbs.
The patch contains a minor CSS update, so you will have to rebuild the
OPAC CSS for testings.
Apply the patch and log in to the OPAC. Test each of the following pages
and their variations. Breadcrumbs should look correct, and each link
should be correct:
- User summary
- Charges
- Personal details
- Submit changes
- Consents (with PrivacyPolicyConsent enabled)
- Tags
- Change password
- Submit password change
- Search history
- Test when logged in and when not logged in
- Checkout history
- Privacy
- Holds history
- Recalls history
- Messaging (with EnhancedMessagingPreferences
and EnhancedMessagingPreferencesOPAC enabled).
- Lists
- View private list
- View public list
- Edit list
- Share list
- Submit invitation
- Create list
- View list contents
- Routing lists (with RoutingSerials enabled)
- Ask for a discharge (with useDischarge enabled)
- ILL requests
- Curbside pickups
- Error page: Navigate to a non-existent page
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds Authorized Value handling for the display of sort1 and
sort2 fields in the acquisitions basket display page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: emlam <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch eliminates two instances of "onclick" from the Koha to MARC
mapping template, moving these event handlers into JS in the footer.
To test, apply the patch and go to Administration -> Koha to MARC
mapping.
- Click "Add" next to a Koha field.
- You should get a JS popup asking for entry of a MARC tag. Confirm
that this process completes correctly.
- Test a "Remove" link too. It should work to remove mapping from a Koha
field.
- Test the "Cancel" choice in both the "Add" and "Remove" cases to
confirm that the operation is cancelled.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the holdings table on the OPAC's bibliographic detail
page so that home and current library columns can be sorted correctly by
library name. There have been changes to the way the template shows
these values, but the DataTables "data-sort" attribute on the table cell
had not been updated accordingly.
To test, apply the patch set the OpacLocationBranchToDisplay system
preference to "home and holding libraries."
- Make sure home and holding library columns are not hidden in the
table settings under Administration -> Table settings -> OPAC ->
holdingst.
- Locate a bibliographic record in the OPAC which has multiple items
from different libraries.
- Test that the home and current library columns sort correctly by
library name.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Calendars can be configured in a way that all days are closed.
The simplest way to do that is to configure a repeatable holiday for
every day of the week.
With such calendars, searching for an open day will literally take
forever.
This patch sets a hard limit on how many iterations are allowed before
giving up. This limit is set to the arbitrary value of 5000, which
should be large enough to be able to consider there is no open days if
we haven't found any with that many iterations, and small enough to
allow the loop to end quickly
Test plan:
1. Set system preference 'useDaysMode' to 'Use the calendar to push the
due date to the next open day' ('Datedue'). Make sure the existing
circulation rules do not conflict with that setting.
2. Browse to Tools » Calendar
3. Set every day of the week to "Holiday repeated every same day of the
week"
4. Issue an item to a patron
5. Check the box and select 'Renew selected items'
6. The renewal should fail pretty quickly
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Following Bug 21246 I find the button to be too obtrusive. This patch
makes CSS changes to the style of the "Last patron" button shown in the
staff interface when the "showLastPatron" system preference is enabled.
To test, apply the patch and rebuild the staff interface CSS.
- Enable the showLastPatron system preference if necessary.
- Go to Circulation in the staff interface and check out to a patron.
- A "Last patron" button should appear on the right-hand end of the
breadcrumbs bar.
- Check that the link, dropdown button, and dropdown menu look good.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the item search fields
administration page, making sure the page title, breadcrumb navigation,
and page headers are consistent with each other.
The patch makes some changes to the way new item search fields are added
in order to keep the display consistent with other similar interfaces:
The "add" form is no longer shown dynamically from the page listing item
search fields. Clicking the "New search field" toolbar button will now
take you to the same template used for editing existing search fields.
This allows us to put the correct context into page title, breadcrumbs,
and headings.
To test, apply the patch and go to Administration -> Item search fields.
Test the process of adding a new search field and editing an existing
search field.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the add item form in the staff interface to
change the 'Add & duplicate' button to 'Add and duplicate'.
In our terminology guide, & should only be used when
it is part of a proper noun or a common abbreviation:
https://wiki.koha-community.org/wiki/Terminology
Test plan:
1. In the staff interface, search for and select a record.
2. Select New > New item.
3. Note that "Add & duplicate" is one of the action buttons at the
bottom of the add item form.
4. Apply the patch.
5. Refresh the page.
6. Note that the action button is now labelled 'Add and duplicate'.
7. Sign off! 8-)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katariina Hanhisalo <katariina.hanhisalo@xamk.fi>
Signed-off-by: Reetta Pihlaja <reetta.pihlaja@siilinjarvi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the authority
types administration page, making sure the page title, breadcrumb
navigation, and page headers are consistent with each other.
Test each page to confirm that page title, heading, and breadcrumbs are
consistent:
- Administration -> Authority types
- New authority type
- Edit authority type
- Delete an authority type which is not used
- Delete an authority type which is in use
- Authority type MARC structure
- New tag
- Edit tag
- Delete tag
- View subfields
- Edit subfields
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in the record overlay rules
page, making sure the page title, breadcrumb navigation, and page
headers are consistent with each other.
Test the record matching rules page to confirm that page title, heading,
and breadcrumbs are consistent.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes some inconsistencies in templates for EDI accounts
and Library EANs, making sure the page title, breadcrumb navigation, and
page headers are consistent with each other.
To test, apply the patch and check these views:
- Administration -> EDI accounts
- New EDI account
- Edit EDI account
- Confirm deletion of EDI account
- Administration -> Library EANs
- New library EAN
- Edit library EAN
- Confirm deletion of EDI account
- With an account for a specific library
- With an account for any library
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Update statuscode -> status_code on the js files
Update remaining batch_id -> ill_batch_id
Update batch object in Illrequest.pm strings_map
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Update accessors
Add +strings embed
Add x-koha-embed to batches list andpoint
Add embed to API call from the front-end
Update table to get data from _strings
Add x-koha-embed to tests
Add strings_map to Illbatch
Add to_api_mapping to Illbatch
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- UI adding support for batch statuses in batch UI
- Admin UI for managing batch statuses
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Add batch column to requests table
- Establish if there are any availability or metadata enrichment plugins and pass that to the template
- Verify if we have any backend that can support batches, if not, don't show the option
- Updates to the ILL toolbar
- New ILL batch modal
- New Koha classes
- API specs
Co-authored-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Edith Speller <Edith.Speller@ukhsa.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When UseControlNumber is off, we previously did a search on the title index,
but this was not actually correct. It might work when we have a dependent
title and the title also appears on 245$p, but there is a better way:
The title of the set record will be found in:
* 773$3 for a dependent title
* 800/810/811/830 for an independent title
The search indices to use are host-item and title-series.
As we are not only looking for 773, POD was adjusted to reflect that.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes C4::XSLT query for volumes the same way it would do
with the generated link (i.e. based on UseControlNumber) and passes
a flag to the XSLT so it displays (or not) the 'Show volumes' link.
To test:
1. Apply the first patch
2. Have a known record without volumes
3. Open the record in the OPAC
=> FAIL: It shows the 'Show volumes' link
4. Have a record known to have volumes
5. Open the record in the OPAC
=> SUCCESS: It shows the 'Show volumes' link
6. Apply this patch and restart_all
7. Reload the above records
=> SUCCESS: It shows the link where it has to, and hides it where it
shouldn't be displayed.
8. Repeat for Intranet
9. Sign off :-D
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
