Letters.t tests failed since time_queued didn't
include timecode. Use DATETIME when inserting
into message_queue.
To test prove t/db_dependent/Letters.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds error codes for delivery notes and replaces English
strings with them in template.
To test confirm everything works as intended.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Delivery notes weren't translatable. This patch adds
them in notices.tt. If note is Mail::Sendmail error generic
'Error occured while sending email' is shown.
Also fixes MySQLisms and adds AFTER to atomicupdate file.
To test prove t/db_dependent/Letters.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds additional delivery notes to messages in message queue as there
can be multiple reasons for a delivery to fail.
Currently in message_queue we are given only two delivery statuses for messages,
"sent" and "failed". When the status becomes failed, we have no idea why it fails.
This feature can be useful with SMS gateway providers. Many SMS gateways inform
the application the reason of SMS delivery failure. With this feature, this
information can now be stored. As well as for emails, instead of simply logging
failures, we can now store the reason of failure directly into the message row
of message_queue.
Test plan:
1. Enable EnhancedMessagingPreferences syspref
2. Find a borrower with notices at members/notices.pl
3. Observe that there is no column for Delivery notes
4. Apply patch and run the given database update
5. Repeat step 1.
6. Observe that there is now a column for Delivery notes
Sponsored-by: Hypernova Oy
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
before this patch, the limit only applies to groups of libraries
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Syspref is now called SearchLimitLibrary, and the description better
explains what the feature does. It works with the advanced search on the
staff client and OPAC, and the masthead search on the OPAC when
OpacAddMastheadLibraryPulldown is enabled.
Sponsored-by: Catalyst IT
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Trying to make the code a bit more readable removing unecessary
variables and parenthesis.
Code is duplicated but no idea where we could move it to.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-BY: Brimbank Library, Australia
Signed-off-by: Amandine Zocca <azocca@ville-montauban.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This commit allows librarians to choose whether they want to query the
homebranch, holdingbranch or homebranch AND holdingbranch when they set
a library or library group search condition in the staff client and OPAC
advanced searches.
Test plan:
1. Apply patches, update database, restart services
2. Set up a record with one item. Edit the item so that:
home branch = Branch A
holding/current branch = Branch B.
Note the barcode of your item.
3. Go to Administration -> Library Groups. Create a library group that
only contains Branch A.
= homebranch and holdingbranch =
4. Go to Administration -> System preferences and find the new
SearchLimitLibrary syspref. Confirm it is set to 'homebranch and
holdingbranch' by default. Keep this tab open.
5. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
6. Submit the search and confirm you are taken to your item as expected.
7. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
8. Submit the search and confirm you are taken to your item as expected.
9. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
10. Submit the search and confirm you are taken to your item as expected.
= homebranch only =
11. Go back to your System preferences tab. Set the SearchLimitLibrary
syspref to 'homebranch'. keep this tab open.
12. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
13. Submit the search and confirm you are taken to your item as expected,
because the syspref is set to homebranch and the library group contains our item's
homebranch.
14. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
15. Submit the search and confirm you are taken to your item as expected.
16. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
17. Submit the search and confirm you are NOT taken to your item and your item
does not show in the search results.
= holdingbranch only =
18. Go back to your System preferences tab. Set the SearchLimitLibrary
syspref to 'holdingbranch'. keep this tab open.
19. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
20. Submit the search and confirm you are NOT taken to your item and your
item does not show in the search results, because the syspref is set to
holdingbranch and the library group does not contain our item's holdingbranch.
21. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
22. Submit the search and confirm you are taken to your item as expected.
23. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
24. Submit the search and confirm you are NOT taken to your item and your item
does not show in the search results.
25. Repeat the above test plan but do your searching with the OPAC
advanced search.
Sponsored-By: Brimbank Library
Signed-off-by: Amandine Zocca <azocca@ville-montauban.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the Date field to be 'Created' and adds a new column
'Updated' which shows the timestamp of the accountline.
To test:
1) Apply patch, restart services
2) Test the following staff client pages:
- Reports -> Cash register
- Patron Accounting tab -> Transactions
- Create a manual invoice. Click 'Print' on the transactions tab to
generate Invoice slip
- Make a payment. Click 'Print' on the transactions tab to generate
Receipt slip
3) Test the OPAC:
- your charges
Sponsored-by: Catalyst IT
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If BiblioAddsAuthorities and AutoCreateAuthorities are enabled, a new record is auto linked when saving and authorities generated with a 670 field that indicates which record generated the new authority.
The code to do this is called before the biblionumber is generated, so the variable that adds the biblionumber to the citation is empty
This patch moves the linking code to after the biblionumber is generated
To recreate:
1 - Enable BiblioAddsAuthorities and AutoCreateAuthorities
2 - Import or create a new record
3 - Ensure the record has controlled fields that do not have authorities before saving, i.e.:
Add a 650 with "test_bug_27577_01"
4 - Search for the authority record
5 - Note the 670 field does not contain the biblionumber
6 - Apply patch, restart all the things
7 - Repeat 2-4
8 - Note the 670 now has the biblionumber
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changed user summary CSS to style H2 not H3 heading
To test:
1) Go to OPAC homepage
2) Login as a user with at least one loan
3) See that the "User summary" heading is not styled
4) Apply patch
5) Run yarn build --view OPAC
6) Confirm the heading is now styled with grey background
Signed-off-by: Wainui Witika-Park <wainuiwitikapark@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Added a User summary <h2>
To test:
1) Go to OPAC
2) Go to home page
3) Check that there is a <h2> saying "User summary"
Sponsored-by: Catalyst IT
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the quote of the day feature is enabled, a "Quote of the day" heading
is displayed. It was an <h3> which was not proper hierarchy, so this has
been changed to an <h2>.
To test:
1) Go to staff client
2) Enable quote of the day preference
3) Go to the OPAC
4) Observe "Quote of the day" heading
5) Ensure it is an <h2>
Sponsored-by: Catalyst IT
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In the 'user_summary block', the "Welcome, user" was an <h3>. This has
been changed to a <p> as it isn't really a heading.
The styling can be changed to make it appear as it was before, or to
make it appear more significant on the page.
To test:
1) Go to the OPAC
2) Go to the home page
3) Go to the 'user_summary' block
4) Check that the part where is says "Welcome, user" is now a <p>
Sponsored-by: Catalyst IT
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On the purchase suggestions page you could end up with two "Your
purchase suggestions" headings, one as an h1 and one as an h2..
Test plan
1/ Add at least one purchage suggestion to a patron
2/ Navigate to 'Purchase suggestions'
3/ Note that just one 'Your purchase suggestsions' heading appears with
a top level '1'.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Wainui Witika-Park <wainuiwitikapark@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'Payment method' heading now needs to be moved to the second level
to ensure consistent header heirarchy.
Test plan
1/ Add some debts to a patrons account
2/ Enable online payments (Paypal is a good example)
3/ Login to the OPAC and navigate to the 'Charges' page
4/ Note the header hierarchy has no gaps... (h1 -> h2, not h1 -> h3)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Wainui Witika-Park <wainuiwitikapark@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 27610 corrected the <h1> tags in each of the OPAC files. This patch
corrects the hierarchy of the rest of the headings on each of the pages.
To test:
1) Go to the OPAC
2) Apply Bug 27610 patch
3) Apply patch (Bug 27740)
4) Go to each of the pages and check that the headings under <h1> are in
the correct order and hierarchy
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the instances of input of type="number" to input
type="text" with attributes inputmode="numeric" and pattern="[0-9]*"
To test, apply the patch and run through the process of installing Koha.
When you reach onboarding step 2, "Create a patron category," check the
enrollment period -> "In months" field. The field should not accept any
input except numbers.
Continue onboarding until step 5, "Create a new circulation rule." On
this page, check that these fields accept only numbers:
- Current checkouts allowed
- Loan period
- Renewals allowed
- Renewals period
- Holds allowed (total)
- Holds allowed (daily)
- Holds per record (count)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We don't longer enter the HTTP_USER_AGENT conditional in the BEGIN block
of C4::Context. It was used when apache only was used.
I am suggesting to remove it but keep the $CGI::VERSION < 4.08 condition
to keep support of all version (not sure it's needed but won't hurt).
I have not found a lot of occurrences of KOHA_BACKTRACES and I am
assuming not much people are using it, we should prefer the dev_install
flag instead (to set environment="development" when plack is started and
enabled the starman trace)
Test plan:
Regression test what you think is useful
Confirm the above statements
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the AJAX call to update an existing hold, pass the
'x-koha-override' header with the value of 'any', so any pickup location
policy override that is needed, is applied.
As the override is taken into account only if AllowHoldPolicyOverride is
enabled, this in fact restores the previous behavior.
To test:
1. Have a patron with a hold
2. Have AllowHoldPolicyOverride set to 'yes'
3. Try changing the pickup location to an invalid one
=> FAIL: The options are the same as before 27205, yet the AJAX call
fails because of invalid pickup location.
4. Apply this patch
5. Repeat 3
=> SUCCESS: The API call succeeds, and the hold is updated (it is
actually refetch, so just verify it has the value you selected
6. Sign off :-D
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is only cosmetic, and maybe personal preferences.
It seems easier to create the library object with the pickup_library we
want to use.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After some discussion we decided that the parameter should be called
'force' for pushign through an action against policy. (as per the
Transfers work).
We decided to stick to 'override' at the API level however as it
highlights the 'human interaction' element of the call.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new parameter (x-koha-override header) to the route,
and makes the controller pass this information (override requested) when
the AllowHoldPolicyOverride syspref is set, to
Koha::Hold->set_pickup_location.
This way, under certain conditions, we can be sure the update wont'
fail.
To test:
1. Apply this patchset
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new parameter to the method. If passed+true it makes
the method skip the pickup validation test.
Tests and POD added for this change.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Hold.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the route handle overriding pickup locations by passing
the 'x-koha-override' header (set to 'any').
To test:
1. Apply the unit tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> FAIL: Tests fail, because things cannot be overridden ATM.
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds unit tests for the PUT /holds/:hold_id route so it
accepts the x-koha-override header and is able to override pickup
location constraints.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds regression tests for overridding pickup locations, which
was inadvertedly not covered by the original dev. What this does, is
moving the $can_override variable definition above, and avoid returning
400 if conditions are not met for the passed pickup_library_id, when
$can_override is true.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Tests pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the tests mock things so the complex holds scenarios
where existing data could interfere, don't get in the middle with what
we need to test.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Nothing broke
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I added a few tests to cover additional cases and found the operator precedence
was failing, switched 'and' to '&&'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 26181 introduced a way to override behavior through a new header,
x-koha-override. And bug 27760 introduced a generic approach to handle
x-koha-override.
This patchset makes the POST /api/v1/holds route rely on this new way of
handling x-koha-override instead of doing it manually.
The header is added to the spec as a parameter.
Note: the header should be defined as:
"type": "array",
"collectionFormat": "csv",
"items": {
"type": "string",
"enum": [
"any"
]
}
but the versions of JSON::Validator we use have lots of bugs related to
header type coercion, so it just doesn't work. The changelog for
JSON::Validator is fairly elocuent about it.
The override now takes a list of valid keywords (right now only 'any'
but it would be fairly straight-forward to add a fairly granular set of
options based on each possible AddReserve failure.
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Tests pass!
4. Sign off!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch improves the POD for the added helper, and also adds
references to the JSON::Validator issue that explains the current
implementation. A FIXME is added for when we upgrade our used
JSON::Validator version.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
By making this method call the helper, we make sure the overrides
hashref is available to any controller to make us of it.
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/auth_authenticate_api_request.t \
t/Koha/REST/Plugin/Query.t
=> SUCCESS: Tests pass! The helper works as expected and the
authenticate_api_request method invokes it!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a simple helper that reads the x-koha-override request
header, and processes it to stash a hashref with the passed overrides.
No check on the overrides themselves is done, as they should be
validated using the OpenAPI spec.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/auth_authenticate_api_request.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
