To test:
- Check RentalFeesCheckoutConfirmation is activated
- Try to check out an item without rental fine
- Verify confirmation message without explanation
is shown
- Apply patch
- Verify confirmation message is no longer shown
- Configure itemtype to have rental fee
- Veirfy now the confirmation message appears as
it should
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I would prefer not to hide this "stuff".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When using a z3950 connexion with UNIMARC authorities, you get an error :
Unsupported UNIMARC character encoding [ ] for XML output for UNIMARCAUTH; 100$a -> 20141119
I've seen thant Bug 2060 when adds authorities import adds a special behavior for UNIMARC : marc flavor must be UNIMARCAUTH instead of just UNIMARC.
This patch adds the same behavior when using z3950 connexion and import.
Test plan :
- Use a UNIMARC install
- Define a z3950 connexion for UNIMARC authorities
- Go to Authorities module
- Click on "New from Z39.50"
- Perform a search
=> Without patch : you get the error
=> With patch : you get results
- Import one result
=> You get the authoritie creation form with all datas
You may check same plan with MARC21 install
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
NOTE: depending on the target, the syntax in the configuration
might not be UNIMARC, but MARC21/USMARC instead!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is introduced by Bug 12874.
Without this patch, it's not possible to clear (set to an empty string)
an item field.
This appended for field linked to an AV list but even if it's not.
The regex tried to prefix 'my_field' with 'items.' to have
'items.my_field'. It wanted to take care of the case where the prefix
already exists (Actually only 1: 'items.cn_source').
The regex is changed to: "add the prefix only if the string does not
contain a dot".
Moreover an ambiguity existed on the prefix: in marc_subfield_structure,
the kohafield is prefixed, but not in the key of the hash sent to
ModItemFromMarc.
Test plan:
- edit an item, set a status that is controlled by an authorized value
examples tested: damaged, not for loan
- check the status saved correctly
- edit the item again, reset the status to empty
- check the status saved correctly
- edit the item again, reset fields, edit fields
- check the fields saved correctly
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To avoir further issue, it's better to explicitely list the fields we
want to retrieve.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the publisher information out of its own
always empty column into the Summary column below the title,
as it is on other acq pages.
The information was never displaying, as publishercode is in
biblioitems and that table was not selected by GetInvoiceDetails.
Also modified the code to take into account that UNIMARC uses
biblioitems.publicationyear and MARC21/NORMARC use bibio.copyrightdate
for the copyright year.
To test:
- create an invoice for records that
- have a publication year
- have no publication year
- have a publisher...
- 'finish receiving' and check the invoice summary page
...acqui/invoice.pl?invoiceid=?
- Make sure all the information displays now but didn't witout the patch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test
1/ Create 3 (or more holds) on one biblionumber, make sure at least
one item is not on loan
2/ Check out the not on loan item to a borrower (maybe number 2 in the
queue)
3/ Look in the database (or on the holds tab on the moredetail.pl)
notice the priorities have not been reordered
4/ Apply patch and try again, notice now they have
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Confirmed the problem without the patch, and confirmed that the patch
corrects it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
GetHistory iterated on the orders to calculate the quantity and price.
These values are never used by the called.
It can be removed.
Test plan:
Verify there is no regression on acqui/histsearch.pl and
catalogue/detail.pl
Actually you just have to check that the total quantity and price are
not displayed on these views.
QA: note that 'count' and 'toggle' are never used in the template.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Minor code tidy to clean up qa script warning.
http://bugs.koha-community.org/show_bug.cgi?id=9165
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A small enhancement to clear existing synced passowrd should this
config option be enbled. This followup is related to bug 12831
http://bugs.koha-community.org/show_bug.cgi?id=9165
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This adds a configuration option to LDAP that prevents it from storing
user's passwords in the local database. This is useful when users of
hosted Koha wish to prevent any form of offsite password storage for
security reasons.
Notes:
* if the option is not included in the koha-conf.xml file, then the
current default behaviour of saving the password locally is retained.
* this has no impact on passwords that are already in the database.
They will not be erased.
To use:
* edit the koha-conf.xml for a system that uses LDAP for
authentication.
* in the <ldapserver> configuration, add:
<update_password>0</update_password>
* feel a greater sense of security.
To test:
1) have a Koha system that authenticates using LDAP.
2) note that when a user logs in, their password is saved (hashed) in
the database.
2.5) it is important to note that, for whatever reason, a user's
password is not stored on a login where their account is created,
only when they log in after being created. Thus perhaps log in and
log out a couple of times to be sure.
3) add the <update_password>0</update_password> option to the
<ldapserver> section of koha-conf.xml.
4) login with a new user (or erase the password from the database for
an existing user) and note that the password field is not populated.
5) log out and log back in just to be sure, check the password field
again.
Sponsored-By: National Institute of Water and Atmospheric Research (NIWA)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Local only logins should continue to function when LDAP is enabled.
This was not the case after bug 8148 [LDAP Auth should FAIL when ldap
contains a NEW password]. For this case, we need to diferentiate
between local accounts and ldap accounts. This is somewhat challenging
and thus this patch is only part of the story.
The other half can be achieved with bug 9165
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These 2 bugs are in conflict.
The first one always join the issue table, the second one join on this
table too if the OnSiteCheckouts pref is enable.
So DBI raises an error if the pref is enabled (2 joins on the same
table).
This patch removes the conditional join.
Test plan:
Go on a detail record page with items and verify that items are list and
that the error no more appears in the log file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Reproduced the problem, the patch fixes it, no noticeable regression found.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, items are visible again.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a library is using Talking Tech for phone notices, any waiting hold
phone notice will show up twice!
This is because Koha generates on at the time the hold is set to
waiting, and then the cronjob TalkingTech_itiva_outbound.pl generates
it's own notice as well.
The former notice will always have a status of 'pending', as the
TalkingTech_itiva_inbound.pl script will update the notice the outbound
script created.
The solution is to prevent Koha from creating a phone notice for waiting
holds if TT is enabled, and let the cron script do it.
Test Plan:
1) Enable Talking Tech from the system preferences
2) Set a hold waiting phone notice in the notices and slips editor
3) Choose a patron, enable hold phone notices for that patron
4) Place a hold for a patron, and check it in so it's marked as waiting
5) Note the phone notice generated for the patron
6) Apply this patch
7) Repeat step 4
8) Note that this time, a phone hold waiting notice is not generated
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amends condition with an additional or statement. Shoudn't affect
anything but phone notices. Change appears logical.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without patch:
-------------
Make payment for patron who has fines
Select the Pay Amount button and add a note in the note box.
Select confirm
Result: The note does not display in list
With patch:
----------
Result: The note displays in list
Bonus testing: The note is included in system logs as well (Home:Tools:Logs)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you use a claimissue notice to claim serials, the generated letter
will be
<order>Title1, Author1</order>
<order>Title2, Author2</order>
...
<order>TitleN, AuthorN</order>
This patch geds rid of these tags.
Test plan:
1/ Create a claimissue notice with something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
2/ Generated late serial issues.
3/ Send notifications to vendor.
4/ The order tags should not exist anymore in the sent email.
You can see bug 5342 for a more detailled test plan.
Note for QA: This should have been done in GetPreparedLetter, but I did
not find a better way to do.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Tested having the <order> tags on one line
and also for a multi-line layout.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fix a typo. Not test plan required, just a look at default UNIMARC framework.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
According to the manual, "Items will stay in the PROC location until
they are checked in".
This is not the actual behavior. Right now items will only change from
PROC to CART, and that is only if InProcessingToShelvingCart is enabled.
Some libraries want to use the PROC to permanent location feature,
without using the CART.
Additionally, the location is only removed if using returns.pl, but
that is not what the manual says either. What if the library uses
SIP2 devices for handling returns? This should be taken into
account.
Test Plan:
1) Apply this patch
2) Set an item's current location to PROC, and it's permananet location
to a different location.
3) Check the item in any way you wish
4) Note the shelving location is updated to the permanent location
5) prove t/db_dependent/Circulation/Returns.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested this with items which had items.location set to 'PROC' and
items.permanent_location set to NULL, '', and a real value, and it
worked correctly in all cases. I tested with check-ins from returns.pl
and from the table of checkouts in circulation and the PROC location was
correctly removed in both cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
You may define in config a folder (usually /tmp) for TT cache :
template_cache_dir in etc/koha-conf.xml.
Some perl pages may be launched from commandline, like tools/export.pl.
Also, the script gather_print_notices.pl uses C4::Templates.
The problem is that when script is launched from Apache, the Unix owner of cache files will be www-data. When script is launched from commandline, like in a cronjob, the Unix owner will be different (like a user named "koha"), causing a crash because cache files can only be read by its owner.
This script disables the template cache if perl script is called from commandline. This cache is certainly only useful for web access.
Using GATEWAY_INTERFACE env var comes from tools/export.pl
Test plan :
- Use a dev install of koha installed in a user home, ie "/home/kohadev"
- Define a folder for template_cache_dir in etc/koha-conf.xml. For example : <template_cache_dir>/tmp</template_cache_dir>
- Check there is no cached templates already in this forder
- Create a file "bib.list" containing a few existing biblionumbers
- As user kohadev, launch : tools/export.pl --record-type=bibs --id_list_file=bib.list
- Look at cache folder
=> Without patch you see cache files owned by user kohadev
=> With patch there are no cache files
- Use the Koha interfaces OPAC and Intranet
=> Without patch you get an error : Template process failed: file error - cache failed to write ...
=> With patch you have no error and cache files are generated with Apache user as owner
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, good test plan!
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No commit message
No test plan.
No regressions found on opac/staff item display
No improvements either, but could be just my test data
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Tested detail and item pages in OPAC and staff, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 2546 removes the description DB field value in some case (3.15.00.003).
But the receipt generated by scripts members/printfeercpt.pl and
members/printinvoice.pl displays this field.
When the description field is empty, the default value (based on
accountlines.accounttype) should be displayed.
Test plan:
- Generate and pay some different kinds of fees for a patron without
filling the 'description' field.
- In Fines>Account, click on the 'print' link.
- Before this patch, the "description of charges" values is empty if no
description was given.
It is a regression introduced by bug 2546, a default value was
inserted in the description field depending on the account type
selected.
- After this patch, the "description of charges" values should be based
on the account type. The string display on printing receipt should be
the same as on the account screen (staff and opac).
Note for QA: If removed the "payment" key, it is not used in template
and generated a warning ("odd number of elements...").
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This fixes the display of payments and other charges on the
fines slip.
Note: This patch fixes a line where the description in the
database was still updated to say "Payment thanks" for partial
payments. It might be worth to do a follow-up correcting the
accountlines table and removing the unwanted comment (see bug 2546).
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch simplifies the SQL query in Letters.pm for table
borrower_modifications.
It also addresses the only case this query is used in opac-memberentry.
An unused variable in Letters.pm is removed.
Test plan:
Enable selfregistration on opac.
Set verification by email to required in prefs too.
Self-register two new users.
Check the email notices generated.
Verify the new users with the tokens in their notice.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Much cleaner SQL
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Cleaner and works as described, no regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In inventory results, CSV or screen, the item withdrawn information is missing.
This information can be usefull to understand why an item was not scanned.
Test plan :
- Check you have in default framework an item subfield mapped with items.withdrawn
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and withdrawn=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and withdrawn=1
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Submit
=> You see a column 'Withdrawn' with withdrawn value
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Export to CSV file'
- Submit
- Open exported file
=> You see a column 'Withdrawn' with withdrawn value
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Modified:
C4/Letters.pm - remove aqbooksellers.* from SELECT statement
In Letters - SendAlerts subrotine, is safe to remove aqbooksellers.* from SELECT statement
for type=claimacquisition or claimissues. Aqbooksellers is passed to GetPreparedLetter subrotine in tables variable.
Testing:
I Apply the patch
Select Tools -> Notices and slips;
Edit ACQCLAIM;
Add :
<order>Ordernumber <<aqorders.ordernumber>> (<<biblio.title>>) (<<aqorders.quantity>> ordered) ($<<aqorders.listprice>> <<aqbooksellers.listprice>> each) has not been received.</order>
Save modifications;
Create a vendor (Acquisition module);
Create an order (Acquisition module);
Click Acquisitions -> Late orders;
Select the order created;
Click Claim order button;
Valide <<aqorders.listprice>>;
Valide <<aqbooksellers.listprice>>.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. It's now possible to output the actual price
in the claim notice.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If no order is selected on the acq claim page when clicking
'Claim order' an ugly perl error message is displayed.
This patch corrects the behaviour to display a human readable
'No order selected'
instead.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reworded commit message to reflect what the patch achieves.
Works as described and passes tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a better check in message for patrons with indefinite restriction.
To test:
Check out an item to a patron.
Add a manual restriction without expiry date to that patron.
Check in the item.
Without patch, the checkin message reads:
Reminder: Patron was earlier restricted until 9999-12-31
Apply patch and repeat steps above.
The message should now read:
Reminder: Patron has a restriction (no expiry date)
NOTE: Changed wording at two places following Owen's suggestion. New: "Patron
has an indefinite restriction"
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Thanks Marc for catching this case. I was thinking like you that the wording
sounded strange while playing with bug 13242. Merge the original patch and the
followup, containing a better wording, thanks to Owen comment.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TO REPLICATE:
Prepare a bunch of Items (6+) for checking out, or have a set of barcodes ready for copy-pasting.
Check-out those items quickly within one minute and observe that the sorting order is not always from the first checkout to the last.
This is because the issuedate doesn't have seconds defined.
AFTER THIS
The bunch of Items is sorted properly.
Tiny patch, works as expected. Passed QA script.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This fix is a global fix for the MarcModificationTemplate feature.
Some unit tests were missing and some behaviors were wrong.
For instance, if you tried to update a non existent field, the script
crashed.
The following line was completely stupid:
if $from_field ne $to_subfield
The field_number equals 1 if the user wants to update the first field
and 0 for all fields.
The field_numbers (note the s) variable contains the field numbers to
update. This array is filled if a condition exists (field exists or
field equals).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Make sure the ModifyRecordWithTemplate routine returns undef.
This patch also removes a warning if GetModificationTemplates is called
without parameter.
Verify
prove t/db_dependent/MarcModificationTemplates.t
returns green.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch series is a bugfix for the Marc modification templates tool.
Bug description:
If you want to do an action (delete/update/move/...) on a multivalued
field and if a condition is defined on the same field, it is highly
probable the resulted record will not be what you expect.
For example:
Deleting All (or the first) fields 650 if 245$a="Bad title" works with
the current code.
BUT if you want to delete All (or the first) fields 650 with a condition
on 650$9=42, and if at least one field matches the condition :
- if you have selected all, all fields 650 will be deleted, even the
ones who do not match the condition.
- if you have selected first, the first 650 field will be deleted, even
if it does not match the condition.
The expected behavior is to delete the fields matching the
condition (and not all the 650 fields).
What this patch does:
This patch introduces 2 changes in the logic of Koha::SimpleMARC.
The first change is a change of the prototypes for the 2 routines
field_exists and field_equals. Now they return the "field number" of the
matching fields.
The second change is the type of the "n" parameter for all routines
using it in Koha::SimpleMARC. Before this patch, the "n" parameter was a
boolean in most cases. If 0, the action was done on all fields, if 1
on the first one only. Now it is possible to specify the "field numbers"
(so the array of field numbers which is returned by field_exists or
field_equals) for all routines which had the n parameter.
Test plan for the patch series:
Note: This test plan describes a specific example, feel free to create
your own one.
0/ Define a marc modification template with the following action:
Delete field 245 if 245$9 = 42
1/ choose and export a record with several 245 fields.
For ex:
245
$a The art of computer programming
$c Donald E. Knuth.
$9 41
245
$a Bad title
$c Bad author
$9 42
2/ import it using the Stage MARC for import tool.
3/ verify the imported record does not contain any 245 field.
4/ apply all the patches from this bug report
5/ do again steps 2 and 3
6/ verify the imported record contains only one 245 field, the one with
245$9=41
7/ verify the unit tests passed:
prove t/SimpleMARC.t
prove t/db_dependent/MarcModificationTemplates.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
DateTime::Format::DateParse (called in Koha::DateUtils::dt_from_string)
does not manage to parse 9999-12-31 if a time zone is given.
my $date = DateTime->new(year => 9999, month => 12, day => 31);
=> OK
DateTime::Format::DateParse->parse_datetime( '9999-12-31' );
=> OK
DateTime::Format::DateParse->parse_datetime( '9999-12-31',
'America/Los_Angeles' );
=> KO (~20sec on my laptop)
It should not be considered as a valid date when the letter is parsed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Note that to reproduce the problem you much be checking in items from an
account which has been restricted indefinitely (either manually or by
the overdues process). With this patch such checkins go from taking
around 50 seconds (in my test system) to around 7 to 10 seconds.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch! Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The QA script was complaining about some dodgy POD in C4/Members.pm,
that was not introduced by bug 11401. This patch fixes the POD, to
keep the QA script happy.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Calls to C4/Charset.pm's NormalizeString function with an
undefined string were triggering warnings when running:
prove -v t/db_dependent/Holds.t
Sadly, t/Charset.t was also lacking calls to NormalizeString.
TEST PLAN
---------
1) prove -v t/db_dependent/Holds.t
-- This should generate the uninitialized string warnings.
Make sure CPL and MPL are in your branches to save
yourself from headaches due to expected data.
2) cat t/Charset.t
-- note there are no function calls to NormalizeString.
You can see other shortfalls in the tests beyond
NormalizeString with: grep ^sub C4/Charset.pm
3) prove -v t/Charset.t
4) Apply patch
5) prove -v t/Charset.t
-- Run as before with more tests.
6) cat t/Charset.t
-- note there are now function calls to NormalizeString.
7) prove -v t/db_dependent/Holds.t
-- Nice and clean run! :)
8) koha-qa.pl -v 2 -c 1
-- all should be Ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removes this warning: Use of uninitialized value $template_id in string eq
at C4/MarcModificationTemplates.pm line 84.
GetModificationTemplates has no template_id if called from
marc_modification_templates.pl without operation (first click from
interface) and from tools/stage-marc-import.pl.
Slightly adjusted the POD lines accordingly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In order to avoid a long list of parameters, it should be better to
pass all of them into a hashref.
This patch does not add or modify a behavior.
Test plan:
Verify the unit tests still pass
- prove t/SimpleMARC.t
- prove t/db_dependent/MarcModificationTemplates.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current holds behavior in Koha allows a situation like this:
- Patron A has an item currently checked out.
- Patron B places a hold on the next available copy of that title.
- Then Patron A will not be able to renew his item, even if there are
other available copies of that title that could potentially fill Patron
B's hold.
Since this seems unfair to Patron A, we should allow renewal of items
even if there are unfilled holds, but those holds could all be filled
with currently available items.
Test Plan:
1) Apply this patch
2) Create a record with two items
3) Check out the item to a patron
4) Place a hold on the record
5) Note you cannot renew the item for the patron
6) Enable the new system preference AllowRenewalIfOtherItemsAvailable
7) Note you can now renew the item, as all the holds can be satisfied
by available items.
8) Place a second hold on the record
9) Note you can no longer renew the item, as all the holds *cannot*
be filled by currently available items
Signed-off-by: Holger Meissner <h.meissner.82@web.de>
Signed-off-by: Chris Rohde <crohde@roseville.ca.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the way CanBookBeReserved() and CanItemBeReserved() return error
messages and how they are dealt with in the templates. This change makes it possible
to distinguish between different types of reservation failure.
Currently only two types of errors are handled, all the way to the user, from the CanItemBeReserved():
-ageRestricted
-tooManyReserves which translates to maxreserves
#############
- TEST PLAN -
#############
((-- AGE RESTRICTION --))
STAFF CLIENT
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Place a hold for the underage Borrower for the ageRestricted Record.
4. You get a notification, that placing a hold on ageRestricted material is
forbidden. (previously you just got a notification about maximum amount of reserves reached)
((-- MAXIMUM RESERVES REACHED --))
0. Set the maxreserves -syspref to 3 (or any low value)
STAFF CLIENT AND OPAC
1. Make a ton of reserves for one borrower.
2. Observe the notification about maximum reserves reached blocking your reservations.
((-- MULTIPLE HOLDS STAFF CLIENT --))
3. Observe the error notification "Cannot place hold on some items"
((-- MULTIPLE HOLDS OPAC --))
1. Make a search with many results, of which atleast one is age restricted to the current borrower.
2. Select few results and "Place hold" from to result summary header element.
(Not individual results "Place hold")
3. Observe individual Biblios getting the "age restricted"-notification, where others can be
reserved just fine.
Updated the unit tests to match the new method return values.
t/db_dependent/Holds.t & Reserves.t
Followed test plan. Works as expected and displays meaningful messages for the reason why placing a hold is not possible.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- rename _entity_clean as _clean_ampersand
- rename the script to sanitize_records.pl
- add a --fix-ampersand switch (the only one FOR NOW, enabled by
default) so it is obvious what the script does.
- make POD and usage reflect this changes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- a new maintenance script batch_sanitize_records
- a new subroutine C4::Charset::SanitizeRecord
- new unit tests for the new subroutine
Test plan:
1/ prove t/db_dependent/Charset.t
2/ Create a record containing "&amp;" (could be follow with as many
'amp;' as you want) in one of its fields and the same for the field
linked to biblioitems.url.
The url should not be sanitized, it may contain "&".
3/ Launch the maintenance script with the -h parameter to see how to use
it.
4/ Launch the script using the different parameters:
--filename=FILENAME
--biblionumbers='XXX'
--auto-search
The auto-search permits to sanitize all records containing "&amp;" in
the marcxml field.
Use the verbose flag for testing.
Without the --confirm flag, nothing is done.
5/ Use the --confirm flag and verify in the biblioitems.marcxml field
that the record has been sanitized.
6/ Try the --reindex flag to reindex records which have been modified.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no reason for underage borrowers to reserve ageRestricted material and
then be denied it's check-out due to ageRestriction.
This patch prevents reserving material for borrowers not suitably aged.
# # # # # #
# A PRIORI #
# # # # # #
BOTH THE STAFF CLIENT AND THE OPAC
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Place a hold for the underage Borrower for the ageRestricted Record.
4. You can reserve an ageRestricted Record with ease.
STAFF CLIENT ONLY
5. Check-in an Item from the ageRestricted Record and catch the reservation.
6. Check-out the ageRestricted Item for this underage Borrower.
7. You get a notification about being unable to check-out due to age restriction.
How lame is that for a 12 year old?
# # # # # # # #
# A POSTERIORI #
# # # # # # # #
STAFF CLIENT
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Check-out an ageRestricted Item for this underage Borrower.
4. You get a notification about having the maximum amount of reserves.
5. Place a hold for the underage Borrower for the ageRestricted Record.
6. You get a notification, that placing a hold on ageRestricted material is
forbidden.
Includes Unit tests.
Followed test plan. Patch behaves as expected. (Note: Propagating error messages to template will be handled in Bug 13116 or 11999)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the logic of deciding whether or not a borrower is old enough to access this material
to its own function GetAgeRestriction.
This makes it easier to use AgeRestriction elsewhere, like with placing holds.
This feature adds a new function C4::Members::SetAge() to make testing ages a lot easier.
A ton of Unit tests included.
C4::Circulate::CanBookBeIssued() fixed and issue with undefined $daysToAgeRestriction per Marc Véron's
suggestion.
Test plan:
(See comment #10 for screenshots about using age restriction)
1) Without patch
Configure Age Restricition (see Syspref AgeRestrictionMarker) and have a biblio record with e.g. PEGI 99 in age restriction field
Try to check out to a patron with age < 99
Check out should be blocked
Change entry in age restriction field to PEGI99
Check out schould now be blocked
2) With patch
Try checkouts again, behaviour should be th same.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds links to "My account" and "My checkouts" to drop down in staff client header.
To test:
Apply patch
Got to drop down of logged in user (top right)
See new links to "My account" and "My checkout" (above "Log out")
Test the links.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Works as advertised. The options are not displayed when you are logged
in as the db/admin user.
Added classes "toplinks-myaccount" and "toplink-mycheckouts" to li tags to make it possible to hide them (per Kyle M $
Switching back to "Signd-off" (Hope this is OK becuause it is a tiny string addition)
Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan (see Bug 6858 for using staticfine.pl) :
For a user (of a given category and library) with several overdues, launch the script :
staticfines.pl --category CAT,AMOUNT --library LIB --delay DELAY
Then, check that the user has been charged of AMOUNT if the due date of the most late item plus the delay is *before* today.
One day later, re-execute the script with the same parameters and check that the fine has not been charged twice.
Without patch, the fine is charged twice, with patch the user already charged is skipped (see output in debug mode)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Without the patch, the fine will be applied every time the script is run.
With the patch the fine will only be applied once.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The default value for *by and *date fields is NULL.
But without this patch, the values are 0 or 0000-00-00.
It comes from the fact that the form set to an empty string the values
and DBIX::Class does not consider them as undefined.
This patch is very ugly, not sure how we can fix that.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
No regressions found, adding and editing suggestions from
OPAC and staff.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
STATUS should be "STATUS", not "status".
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutines NewSuggestion and ModSuggestion use DBIx::Class instead of C4::SQLHelper.
Moreover, the tests and the .pl have been adapted.
Test plan:
1) Apply the patch.
2) Execute the unit tests by launching :
prove t/db_dependent/Suggestions.t
3) The result has to be a success without error or warning :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=91, 2 wallclock secs ( 0.05 usr 0.01 sys + 1.65 cusr 0.09 csys = 1.80 CPU)
Result: PASS
4) Log in the intranet, create a suggestion and verify the created suggestion.
5) Edit a suggestion from the intranet and verify the suggestion is correctly modified.
6) Log in the OPAC and verify you can add a suggestion.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, suggestion created on staff and opac,
suggestion edited without problems, no koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script:
Also tested:
- adding suggestion from staff and OPAC
- edit suggestion from staff
- deleting suggestion from OPAC
- changing to a normal status (email got created)
- changing to a custom status (SUGGEST_STATUS)
- display of custom status in OPAC
No problems found.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
While testing a bug, warnings in the opac error log were
building up due to a particular line in C4::Auth. After
reviewing the code, it was discovered that removal of the
OpacMainUserBlockMobile system preference created this.
Since the system preference no longer exists, and is not
used, the line was deleted from C4/Auth.pm to prevent this
warning from occuring.
TEST PLAN
----------
1) Go to any OPAC page.
2) Check your opac error log.
-- there should be something about uninitialized values
used in C4/Auth.pm around line 443.
3) Apply the patch
4) Refresh the page.
-- that same error should not be triggered.
5) prove -v t/db_dependent/Auth.t
-- this runs the get_template_and_user function
which had the parameter removed.
6) run the koha qa test tools
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sponsored-by: Ville de Victoriaville, QC
Confirmation box contents:
"Please confirm checkout"
"-Rental charge for this item: n"
[Yes, check out (Y)] [No, Don't Check Out (N)]
Test case A: Confirm checkout
1) Go to checkout user "X"'s checkout page.
2) Enter barcode for an item with rental fees.
3) Click the "Check out" button.
4) Confirmation box appears.
5) Click on the "Yes" button.
6) Item is added to checkout list.
7) Fees are added to the patron's account.
Test case B: Decline checkout
1) Go to checkout user "X"'s checkout page.
2) Enter barcode for an item with rental fees.
3) Click the "Check out" button.
4) Confirmation box appears.
5) Click the "No" button.
6) Checkout page goes back to its initial state.
7) Patron has no item checked out and no fees to pay.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With the system preference RentalFeesCheckoutConfirmation
set to "don't ask" there is no change in behaviour.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works, and so I'll sign off, but I'm not crazy about the workflow.
Having the error message display on an otherwise empty page is not user
friendly. The entry form should be redisplayed so that the user can
modify the data they submitted.
That really should be changed in a follow-up.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Description is no longer made required by the template and an empty
description is saved correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This follow-up makes drastic changes to the templates in order to bring
them into compliance with established patterns and markup guidelines.
Only minor changes are made to perl scripts.
Changes:
- Add a toolbar include for displaying new, edit, transfer, and delete
buttons.
- Improve title and breadcrumbs with collection titles and better
specificity.
- Correct page structure which was inconsistent with the markup of
similarly-structured pages.
- Correct styling of error and informational messages.
- Added detailed error messages for a couple of conditions which were
not defined in the template.
- Add link to the detail page of titles which are in a collection using
the view defined in the IntranetBiblioDefaultView preference.
- Add a link to remove an item from a collection directly without having
to scan the barcode.
- Add client-side validation to collection creation form.
- In RotatingCollections.pm, add biblionumber to the list of columns
returned by GetItemsInCollection.
- In rotating_collections/*.pl, remove obsolete declaration of system
preference variables.
To test, perform all the operations associated with Rotating
Collections:
- Add a new collection
- Edit an existing collection
- Add items to a collection
- Remove items from a collection (via barcode and link)
- Test the behavior of all new toolbar buttons
- Verify that titles and breadcrumbs look correct and links work
correctly.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Test Plan:
In "Tools" -> "Rotating Collections" -> "Add/Remove items":
When adding item barcodes to the collection, the input field
<input type="text" id="barcode" name="barcode">
should become active
automatically so it is easy to add multiple barcodes rapidly without touching the
mouse or keyboard.
Enter-press is dealt by the barcode reader so automatic form submittal should be handled
by the barcode reader.
In "Rotating collections" -> "Transfer Collection":
When the collection is initially transferred, items are set to trasfer correctly.
When the collection is transferred while items are still being transferred, the transfer
destination library doesn't change from the original one.
The holding library changes for all items in the collection to the destination library on
retransfers as well.
This is tricky if a user accidentally places the wrong destination.
When I try to checkin these items to their new retransfer location, I get the following messages:
-"This item is part of a rotating collection and needs to be transferred to <original transfer destination>"
-"Please return Valkoinen ihmissyj / to <original transfer destination>"
-"Print slip or Cancel transfer"
When I checkin a Item to a arbitrary branch, I get the following messages:
"This item is part of a rotating collection and needs to be transferred to <retransfer destination>"
"Please return Valkoinen ihmissyj / to <original trasfer destination>"
Bug 8836 - Resurrect Rotating Collections - QA Followup
Bug 8836 - Resurrect Rotating Collections - Followup 2 - Perltidy rotating collections scripts
Bug 8836 - Resurrect Rotating Collections - Followup 3
* Fix bad TT Tag
* Fix bad sql query
* Fix capitalization ( HTML4 )
* Allow a rotating collection's location to keep AutomaticItemReturn
from sending it back to the branch of origin
* Fix bad query
Bug 8836 - Resurrect Rotating Collections - Followup 4 - Autofocus on barcode field
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Don't transfer issued and waiting items
Items in a rotating collection are automatcially transferred when a
collection is transferred. This is a problem for currently checked out
items and items on hold marked as "Waiting".
This patch resolves this issue by skipping the transfer for those items.
When the items are then returned, the librarian will be alerted to
transfer the item to the library currently holding that rotating
collection.
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Link collections.colBranchcode to branches.branchcode
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
http://bugs.koha-community.org/show_bug.cgi?id=8835
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The example usage for
C4::Members::Messaging::SetMessagingPreferencesFromDefaults
calls the subroutine SetMessagingPreferenceFromDefaults, not
SetMessagingPreferencesFromDefaults (missing the 's' at the
end of 'Preferences').
To test:
- Apply the patch
- Check that the POD now refers to the actual name of the
subroutine
(perldoc C4::Members::Messaging)
http://bugs.koha-community.org/show_bug.cgi?id=13194
Adding 's' is the correct doc change to make it match with
the function definition. Comfirmable with less.
perldoc C4::Members::Messaging proves the doc is still nice.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11703 breaks the checkouts export feature.
To reproduce: Fill the ExportWithCsvProfile pref and go on the
circ/circulation.pl page. The export column appears, but not the export
button.
Test plan:
Go on the checkout list (circ/circulation.pl and members/moremember.pl)
and verify the export column and the export button appears.
If you click on the button, a file should be generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
package Koha::Item::Search::Field
function C4::SQLHelper::GetColumns
function C4::Items::SearchItems
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tests run without error
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Item search is available at catalogue/itemsearch.pl (link is in
catalogue/search.pl)
It only uses SQL (not Zebra)
* Use DataTables and server-side processing to be able to filter on
individual columns after the first search is done.
* Allow to export results in CSV
* With Javascript disabled, search form still works (and CSV export too)
There is the possibility to define "Custom search fields" in a new admin
page admin/items_search_fields.pl (link is in admin/admin-home.pl)
A custom item search field is defined by:
* a name: its unique identifier
* a label: the text displayed to the user
* a MARC field/subfield: the field/subfield to query (it uses
ExtractValue)
* an authorised values list (optional): if defined the list is displayed
in the search form
New Perl dependency: Template::Plugin::JSON::Escape
Test plan:
1/ Apply the patch and run updatedatabase.pl
2/ Go to advanced search (staff interface), then click on "Go to item
search"
3/ Play with the search form! :)
In the 3rd fieldset you can add as many fields as you want and combine them with
boolean operators (AND, OR). You can use SQL jokers characters (%, _)
You can output to screen (in a DataTables table) or to a CSV file.
4/ In the DataTables table, play with filters and try sorting columns.
5/ Disable Javascript (with Firefox: extensions NoScript or YesScript,
or in about:config 'javascript.enabled' = false
6/ Reload the search page and do some searches on screen output. (there
is no sorting or filtering features, but there is still pagination)
7/ Try again CSV output.
8/ You can re-enable Javascript.
9/ Go to Administration > Items search fields
10/ Add a new field. Example for title (in UNIMARC):
Name: title
Label: Title
MARC field: 200
MARC subfield: a
Authorised values category: None
(add another field with an authorised values category to see the
difference).
11/ As you are there try to update and delete some fields.
12/ Go back to items search form. You can see in the 3rd fieldset that
your fields have appeared in the selects.
13/ Try searching on them.
14/ I think you're done :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Good new option.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- use Modern::Perl;
- fix a typo
- remove an old comment
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This feature will allow libraries to specify that, when an item is returned,
a local hold may be given priority for fulfillment even though it is
of lower priority in the list of unfilled holds.
This feature has three settings:
* LocalHoldsPriority, which enables the feature
* LocalHoldsPriorityPatronControl, which selects for either tha patron's
home library, or the patron's pickup library for the hold
* LocalHoldsPriorityItemControl, which selects for either the item's
holding library, or home library.
So, this feature can "give priority for filling holds to
patrons whose (home library|pickup library) matches the item's
(home library|holding library)"
Test Plan:
1) Apply this patch
2) Run t/db_dependent/Holds/LocalHoldsPriority.t
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In the OPAC if you view the MARC details for a title (and have
OPACXSLTDetailsDisplay enabled) there is a "view plain" link which displays the
output of opac-showmarc.pl. This is broken in master: fixed by this patch.
Test plan:
(1) Set OPACXSLTDetailsDisplay to default
(2) Do a search on OPAC, then display a specific biblio record
(3) Click on MARC view tab. Then click on 'view plain' link. Nothing is
displayed.
(4) Apply the patch. And refresh the MARC detail page.
(5) Click on 'view plain' link. Check that a plain text MARC record is
displayed.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Note: This makes a small change to C4::Templates::themelanguage so that
it works with .xsl files too (They live in the xslt dir)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- capitalization fix "Checked out"
- display new tabs only when feature is activated
- fixes a qa script complaint about POD in Items.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements the In-House Use feature for Koha.
It adds:
- 2 new sysprefs:
'In-House Use' to enable/disable this feature
'In-House Use Forced' to enable/disable the feature for *all* users.
- 2 new columns issues.inhouse_use and old_issues.inhouse_use
- Datatable on the circulation history pages (readingrec) at the OPAC
and the intranet.
A new checkbox in the Circulation tab. If checked, the issue become a
in-house use (in the statistics and issues tables).
When you check it, the due date changes to the today date.
The syspref "In-House Use Force" allows to force the in-house use to
permit the checkout even if the borrower is debarred or others problems.
In the issue table, a new string (in red) marks the issue as "in-house use".
The circulation history contains 3 tabs : "all", "checkout" and
"in-house use" (OPAC and intranet).
The cronjob script:
If AutomaticItemReturn if off, a library would like not to do a transit
operation manually. This script (to launch each night) do returns
for a specific branches.
Test plan:
1/ Execute the updatedatabase entry
2/ Enable the 'In-House Use' pref.
3/ Checkout a biblio for a patron and check the 'in-house use' checkbox.
4/ Check that the due date is the today date (with 23:59) and is not modifiable.
5/ Click on the check out button and check that the new check out
appears in the table bellow with the "(In-house use)" string.
6/ Go on the circulation history pages (readingrec and opac-readingrec)
and try the 3 tabs. In the last one, your last checkout should appear.
7/ Check in.
8/ Check readingrec pages.
9/ Choose a debarred patron and check that you cannot checkout a biblio
for him.
10/ Switch on the 'In-House Use Forced' pref
11/ You are now allowed to checkout a biblio for the debarred patron.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When parsing the letter content, the 0000-00-00 should not be replaced,
it's not a valid date.
Test plan:
prove t/db_dependent/Suggestions.t
should not return the following error:
0000-00-00 seems to be a date but an error occurs on generating it (The
'month' parameter ("0") to DateTime::new did not pass the 'an integer
between 1 and 12' callback
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds another check for 0000-00-00.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the aim to remove hardcoded themes the C4::Templates::themelanguage
got dependent on the DB being populated. This patch reintroduced the
hardcoded defaults as a last resort.
To test:
- Do a fresh install, clean your browser's cache, empty DB
- Open the staff interface
=> FAIL: A "Software error" screen shows "Template process failed: file error..."
- Apply the patch
- Reload
=> SUCCESS: The webinstaller prompts for login correctly.
- Sign off :-D
Regards
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The method C4::Budgets::GetBudgetHierarchy() retreives from database budgets in an array containing a tree of budgets (parent -> children -> children, ...).
The code generating this tree with the SQL results needs optimization because when a lot of budgets exists, it can run during several minutes.
This patch rewites the code using a recurive method.
Test plan :
- Create a active budget "MyBudget" with 1000
- Click "Add found" on this budget
- Create a found "Parent" with 1000, set you has owner
- Click "Add child found" on found "Parent"
- Create a found "Child" with 100, set you has owner
- Click "Add child found" on found "Child"
- Create a found "Grand-child" with 10, set you has owner
|
- Create a new acquisition basket
- Add a new order with "Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Add a new order with "Grand-Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Close basket
- Perform the receive of the two orders
|
- Go to founds of "MyBudget"
=> You see a table with 3 founds
- in "Fund filters", select no library and uncheck "Show my funds only" and click on "Go"
=> You see a table with "Parent" found
- Click on small arrow left of the fund code of "Parent"
=> You see a new line with "Child" found
- Click on small arrow left of the fund code of "Child"
=> You see a new line with "Grand-Child" found
|
=> You see in "Grand-Child" row "Base-level spent" = 2 and "Total sublevels spent" = 2
=> You see in "Child" row "Base-level spent" = 2 and "Total sublevels spent" = 4
This confirms the founds are used in a hierarchie.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to set an owner to a fund hierarchy
On editing a fund, if it has children, a new checkbox appears "Set this
owner to all children funds".
If checked, all the fund hierarchy will herit to this owner.
This will facilitate the fund owner modifications.
Test plan:
- Verify that the new checkbox only appears if the fund has at least a child.
- Create a consistent fund hierarchy, something like:
fund1
fund11
fund111
fund12
fund2
fund21
- Try to modify a fund owner without checking the checkbox. Verify the
children have not been modified.
- Try to modify a fund owner with checking the checkbox. Verify all fund
hierarchy has been modified.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works as announced.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- GetImportBiblios: prepare the query is useless here
- use Modern::Perl
- Remove useless indentation level in pl file and redirect to 404 if
required params are not given.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
New patch should apply correctly.
modified: C4/ImportBatch.pm
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 11876 - Diff column is now displayed.
If a match is found, a 'View' link appears in the Diff column.
Old patch was not implementing datatables, and therefore was not compatible with this version of Koha.
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
modified: tools/batch_records_ajax.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
These patches have some issues but I'm going to submit a follow-up which
I think will address them all and offer some improvements as well.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When running update_totalissues.pl cronjob, it will stop on a corrupted
record.
This patch changes UpdateTotalIssues so that it return 1 if processing
record has succeded. Also, if mapping with biblioitems.totalissues does
not exist, the method has nothing to do so it stops and returns 1.
When processing a corrupted record, script now alerts about the error on
this biblionumber (if script is verbose) and process next record.
A total number of records with error will be printed at the end of the
script.
Test plan :
- Create a dabase with a few biblios and some issues
- Modify first biblio record (use direct sql update) : set empty value
in biblioitems.marcxml
- Launch script : misc/cronjobs/update_totalissues.pl --use-stats --commit=1000 -v
=> Without patch : the script stops at first record
=> With patch : the script prints error for first record and processes
all records
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I was able to confirm the problem before the patch and successfully
follow the test plan.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
By tweaking the GetReservedAuthorisedValues function in
C4::Reports::Guided, biblio_framework can be added as a dropdown
list into the guided reports parameters.
The change in C4/Reports/Guided.pm required a test, which is
found in t/db_dependent/ReportsGuided.t
Code was then added to reports/guided_reports.pl to build the
appropriate hash to trigger the proper dropdown list.
TEST PLAN
---------
1) Apply patch
2) prove -v t/db_dependent/ReportsGuided.t
-- all should pass, this confirms that both
C4/Reports/Guided.pm and this test file work.
3) Log into staff client
4) Reports
5) Create from SQL
6) Enter appropriate information like:
Report name: Test 13141
-- no need to change Report group or Report is public or Notes or Type
SQL:
SELECT CONCAT('<a href=\"/cgi-bin/koha/catalogue/detail.pl?biblionumber=',
biblio.biblionumber,'\">',biblio.biblionumber,'</a>') AS
BiblioNumbers, title, author, frameworkcode
FROM biblio
WHERE frameworkcode=<<Enter the frameworkcode|biblio_framework>>
7) Save report
8) Run report
-- The parameter entry page should have a drop down of
framework codes.
9) Select a framework code, and click Run the report
-- The displayed SQL should have a "frameworkcode=" portion
matching the selected framework.
10) Run the koha qa test tool.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan followed successfully.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch wraps the SMS::Send Driver initialization and sending process into an eval block
and gracefully causes the sending to fail, instead of crashing the process and preventing
emails and good sms' from being sent.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Remove tab characters in acqui/addorder.pl
* Remove FIXME in acqui/cancelorder.pl
* Fix typos: "canceled" -> "cancelled", "occured" -> "occurred"
* Replace "Click here" link by "OK"
* Add a column to aqorders to store cancellation reason instead of
having it in aqorders.notes, to avoid having untranslatable strings in
database
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some code was duplicated, all is now in cancelorder.pl
Added possibility to provide a reason for cancellation (or other things,
this is saved in aqorders.notes)
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When the stratify_tags function is called without any tags, the
$min and $max variables are left undefined, which triggers a
warning message about uninitialized values in the subtraction.
TEST PLAN
---------
1) prove -v t/db_dependent/Tags.t
-- should succeed, but there is no test for empty tags.
2) Make sure that you have no tags
3) In Opac, go to 'Tag cloud'
4) Check the opac error log file
(e.g. ~/koha-dev/var/log/koha-opac-error_log) for entries
regarding uninitialized values $max and $min in C4/Tags.pm
5) apply this patch
6) prove -v t/db_dependent/Tags.t
-- should still succeed, though no tests are added.
7) Reload page 'Tag cloud'
-- Result: No additional warnings in opac error log file.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
New and old tests pass. Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the OPAC prog template going away, the only remaining use of the
yuipath preference is on the basketgroups template. The yuipath
preference should be removed and the local path hard-coded.
This patch:
- removes yuipath handling from C4/Templates.pm
- removes the preference from sysprefs.sql
- deletes the preference via updatedatabase.pl
- removes the preference from the staff client preferences file
- removes unused references to the YUI assets from the help file
header include
- adds the local YUI asset path to acqui/basketgroup.tt
To test, apply the patch and run the database update. View some online
help pages and confirm that they function correctly. View the
basketgroups page (Acquisition -> Vendor -> Basket groups), edit a
basket group, and confirm that basket drag and drop operations work
correctly.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Online help and basket group drag&drop functionality still work correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Two XSL files in the bootstrap theme contain hard-coded paths to the
prog theme directory. This patch adds a query of the opacthemes system
preference and builds the path based on the returned value.
To test in a MARC21 system:
Create or locate a record which contains a subject which is linked to an
authority record. View the detail page for that record in the bootstrap
OPAC and confirm that there is a magnifying class icon next to the link
for that subject heading. Inspect or right-click the image and "View
image" [FF. "Open image in new tab" in Chrome] to verify that the image
being shown is from the bootstrap theme directory.
Also modified: The NORMARC XSL for the detail page which has been
changed in the same way. I did not test it in a NORMARC catalog.
Edit: Fixed copy-and-paste error causing duplicate image.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
The is a problem in the logic, fallback must be:
1. Requested (theme, lang, tmpl)
a. return (theme, lang, tmpl), if not
b. return (fallback, lang, tmpl), if not
c. return (theme, 'en', tmpl), if not as last resort
d. return (fallback, 'en', tmpl)
Previous patch missed option 'c', worked for CCSR
but not bootstrap, sorry.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch removes hardcoded 'prog' from themelanguage on C4/Templates.pm
It adds a new syspref OPACFallback to hold the prefferred fallback
theme for new themes with minimal changes.
This does not brake CCSR if new syspref value is 'prog',
using 'bootstrap' works somehow, but with strange results.
To test:
1) Apply the patch
2) Run updatedatbase.pl
3) CCSR, prog & bootstrap must work as usual
4) Need to test theme/language fallback
a) translate for your preferred language (xx-YY)
b) enable language on opac
c) go to opac, select that language
d) login on opac, go to personal details
e) remove koha-tmpl/opac-tmpl/bootstrap/xx-YY/modules/opac-memberentry.tt
d) reload page, must load in English
f) click other member options, must load on translated language
(can use other pages, ccsr, prog or bootstrap)
5) Do a similar test but for a staff page, enable lang, switch to it,
rm koha-tmpl/intranet-tmpl/prog/xx-YY/modules/admin/admin-home.tt,
any page must be translated except for admin home.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR now deprecated there is no longer a need for the
OPACMobileUserCSS system preference. This patch removes it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR having been deprecated there is no longer a use for the
OpacShowLibrariesPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Order module and put in
it the code from NewOrder and NewOrderItem.
Test plan:
1/ Create an order, modify it, receive it, cancel the receipt.
2/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without the module some of the tests will fail. As this is
fixing a serious bug for RTL language users, we agreed
to make it mandatory.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes subtag_registry.sql from lang dirs,
and put it on a new mandatory dir
In that way we need to update only one file.
All similar files are removed.
To test:
1) Try a new install, or simply create a new database,
grant permissions on it, change koha-conf.xml to use
this database and go to staff page
2) Go step by step until all mandatory or optional sql
files are loaded. Check that subtag_registry.sql is
loaded.
3) Do it again but on other language. First install
translation and repeat 2), could use de-DE or fr-FR
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested with de-DE.
Thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new DB field serial.claims_count
This field already exists for late orders. It makes sense to introduce
it for serial.
Test plan:
0/
a) Does not apply the patch.
b) Remove all your claimissues notices and be sure you have some serial issues
in late.
c) remove email address for the vendor you will use.
d) remove email address for the logged in user.
e) Export claims using the csv export => The selected issues will be
marked as claimed.
f) logout/login (to update the email address).
1/ Apply the patch and execute the updatedb entry.
2/ Go on the Serials > Claims page
3/ Verify that you get a warning message 'No claimissue notice defined'
4/ Verify the vendor list is correct (with the number of serial in late.
You should not get any changes here.
5/ Select one vendor and verify that the issue which was claimed before
has a claim count set to 1.
6/ Verify that you are not able to send notification to the vendor.
7/ Create a claimissue notice.
Something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
8/ Go on the Serials > Claims page, the warning message does not appear
anymore.
9/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for this vendor).
10/ Add an email for the vendor.
11/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for your user).
12/ Add an email address to your user
logout/login
13/ Select issues. Select a notice. And "Send notification".
You should get a happy message: the email has been sent!
14/ The email will contain the order tags if bug 12851 is not
pushed/applied.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some small issues fixed in a follow-up.
Note: If you change the email address of your staff user, you will
have to log out and back in to make the change take effect.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix the cn_sort sorting accurace described by Joy Nelson.
Testing:
I) Appy the bug 12424 patch
Before applying this patch:
0) Select 3 items.
1) Edit the items selected
2) Change "Full call number" option to 971/P23w/v.1-2/pt.8, 971.01/P23w/v.1-2/pt.6-7 and 971.01/P23w/v.1-2/pt.7
3) Save changes
4) Valide 971P23WV_12PT_8_000000000000000, 971_000000000000000_01P23WV_12PT_67 and 971_01P23WV_12PT_700000000000000 (table items - cn_sort column).
After applying this patch:
5) Edit again the item selected in 0
3) Save changes
4) Valide 971_000000000000000_P23W_V_12_PT_8, 971_010000000000000_P23W_V_12_PT_67, 971_010000000000000_P23W_V_12_PT_7 (table items - cn_sort column).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should add the ability to apply a regular expression to screen
messages for the SIP2 server. This would allow libraries to not only
customize the screen messages the patron sees, but can also allow screen
messages to be translated.
Test Plan:
1) Apply this patch
2) Inspect etc/SIPconfig.xml, note the new screen_msg_regex tags
that can be nested inside a given login tag.
3) Add one or more screen_msg_regex tags to your own SIP config
Recommendation: s/Greetings from Koha./Welcome to your library!/g
4) Restart your SIP2 server
5) Test with a SIP2 machine, or use /misc/sip_cli_emulator.pl
6) Note your new AF fields!
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This subroutine is now useless.
Test plan:
git grep FormatNumber
should not return any result in pl and pm files.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
[New commit on 18 Aug 2014 : rebased, and DOM indexing only]
Issues to fix :
Most of 6XX may contain a $2 that identifies the system used for indexing. It should not be indexed.
In French libraries, $2 contains "rameau". So searching books about the music composer "Rameau" retreive thousands of records!
For some 6XX fiels, other subfields should not be indexed, for example dates of persons and family, or adresses.
In Unimarc guide, 600$t,601$t,602$t are said to exist but to be "not used". I keep them indexed.
Additionnally, subject indexing could be improved by using specific indexes for each 6XX if possible :
In ccl.properties :
- su-to, su-geo and su-ut are defined as aliases of Subject.
- a specific index is defined, but not used in record.abs : Subject-name-personal, alias su-na
We can use these indexes and create new specific indexes by using existing bib1 attributes.
We could also index $j,$x,$y,$z subdivision in specific indexes.
This patch does the following changes :
1) For all 6XX : Not indexing $2 (LSCH, Rameau...), $3 and $5
2) Suppressing the indexing of some specific subfields, depending on the field:
600 : Personal name used as a subject // see Marc21 600
not indexing c (additional elements),f (dates),p (address/affiliation)
602 : Family name used as a subject // see Marc21 600 3X
not indexing f (dates)
616 : Trademark
not indexing c,f
3) For all 6XX : index $j,$x,$y,$z in several indexes in addition to the specfific index for their 6XX field:
4) Define in ccl.properties some specific indexes :
Subject-name-conference 1=1073 => alias su-conf
Subject-name-corporate 1=1074 => alias su-corp
Subject-genre-form 1=1075 => alias su-genre and su-form
Subject-geographical 1=1076 => alias su-geo
Subject-chronological 1=1077 => alias su-chrono
Subject-title 1=1078 => alias su-ut and su-ti
Subject-topical 1=1079 => alias su-to
5) Adding new aliases in Search.pm :
su-chrono, su-form, su-genre, su-corp, su-conf, su-ti
6) Using these new indexes in for
600 : Subject and Subject-Personal-Name ; all subfields except subdivisions in Personal-name
601 : Subject, Subject-name-conference and Subject-name-corporate and Subject-name-conf ; all subfields except subdivisions in Corporate-name and Conference-name
602 : same as 600 but could be improved later
604 : Subject and Subject-title ; $a in Subject-Personal-Name ; all subfields except subdivisions in Name-and-Title
605 : Subject and Subject-title
606 : Subject and Subject-topical
607 : Subject and Subject-geographical ; all subfields except subdivisions in Name-geographic
608 : Subject and Subject-genre-form
To test :
A. In a UNIMARC-DOM indexing environment
1) Apply the patch
2) Rebuild zebra
3) Create a record A with some values in critical fields, for example:
- the string "test9828" in 600$c 600$f 600$p, 602$f, 616$c, 616$f, 606$2,600$2
- the string "subform" in 600$j
4) Create a record B with the string "subgeo" in 606$y
5) Create a record C with the string "subdate" in 606$z
6) try to search "su:test9828". You should have no results
7) try to search "su-genre:subform". You should have 1 result : record A
8) try to search "su-geo:subgeo". You should have 1 result : record B
9) try to search "su-chrono:subdate". You should have 1 result : record C
10) on existing records, try su-ut, su-to, su-na, su-form, su-corp, su-geo indexes, and see it results are relevant
Indexing of subjects could maybe be improved later
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
All seems to work as expected, I am not super-familiar with UNIMARC but I wonder if in su-corp and su-conf the subdivisions might be useful (e.g. France-Gendarmie / Staatsbibliothek-Berlin)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the 23 July development meeting it was decided to formally deprecate
GRS-1 indexing mode for Zebra. This patch makes code fallback to DOM
on the remaining places. No behaviour change should be noticed, as DOM
has been the default for a while.
Regards
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Also checked running Makefile.PL
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes _get_facet_from_result_set rely on a new syspref (FacetsMaxCount)
to set the max facets to show for each facet category. It defaults to 20 if
the syspref is absent or empty.
To test:
- Have a search with lots of facet results (with some category showing the "See more" link).
- Jump to "See more", notice it shows more than 20 facet values.
- Apply the patch, reload the page.
=> SUCCESS It only shows 20 (default hardcoded value)
- Change the FacetsMaxCount syspref to other value (e.g. 15 or 100).
- Reload
=> SUCCESS: it shows the expected amount.
- Sign off :-D
Regards
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan completed successfully
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10550 as renamed items.wthdrawn into items.withdrawn.
This change was missing in ILSDI/Services.pm
Test plan :
Test ILSDI webservice GetAvailability on a item with items.withdrawn > 0.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes what seems to be the last occurence of wthdrawn.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
So notices using it (circulation, holds etc) will now use the new behaviour
To test:
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test some mails, a circulation alert, an acquisitions claim, or a newly created borrower alert
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Apply patch
2/ Add or Edit a branch, filling out the new fields
3/ Check that the changes saved
http://bugs.koha-community.org/show_bug.cgi?id=9530
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I could reproduce this problem in 3.14.4 where I wrote the patch.
Fields shifted like branchcode moved to B_phone.
Could not reproduce it for master.
But this code change seems to improve things on master too.
TEST PLAN
---------
1) Alter the order of your deletedborrowers table.
e.g. alter table deletedborrowers change column privacy privacy int(11) after city;
2) Apply the 3.14.x test patch.
3) prove -v t/db_dependent/Members.t
-- Will fail on the new test.
4) Apply the 3.14.x code change patch.
5) prove -v t/db_dependent/Members.t
-- Will succeed on the new test.
6) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch set reintroduced the formerly removed system preference,
just removing it again.
Also fixes complaints of the QA script about POD in the new module.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* POD doc
* hardcoding hea.koha-community.org as the URL where the stats must
be sent
* fixing some typos
* adding all sysprefs we want to upload.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Goals:
- Collecting Koha usage statistics
- Rendering stats on a community website
- Having a big bicture of how koha is used
3 parts in the project:
- this patch in koha
- hea-ws which collects data
- hea-app which renders data
Installation:
1/ Fill systempreferences:
UsageStatsLastUpdateTime UsageStatsID UsageStatsShare UsageStatsLibraryName
2/ Setup a cron in your crontab (ex: at 3:00 every first of the month):
0 3 1 * * export KOHA_CONF=/home/koha/etc/koha-conf.xml; export PERL5LIB=/home/koha/src; perl /home/koha/src/C4/UsageStats.pm
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the "Publication date" and "Acquisition date"
searches when using non-QueryParser and QueryParser searches.
It adds structure attributes to the template, which is consistent
with how phrase searching is currently handled.
It removes unnecessary code from Search.pm, adds some necessary
code which is consistent with existing code, and adds a lot of
explanatory comments.
_TEST PLAN_
Before applying:
0) Turn off QueryParser
1) Try a "Publication date" or "Acquisition date" search from the
staff client advanced search.
2) Note that even though the description on the result page makes
it seem like you're doing an index-specific search, you're actually
doing a keyword search. You can verify this by checking the 008
from positions 7 to 10 for "Publication date" or "Date accessioned"
on items for "Acquisition date".
3) Turn on QueryParser
4) Try doing the searches from Step 1.
5) A "Publication date" search should probably produce zero results
After applying patch:
6) Keep QueryParser on
7) Try doing the searches from Step 1.
8) Notice that you're actually getting results consistent with
your search (ie the 008/7-10 shows the date you searched for,
and there is a "Date accessioned" in items which matches your
search)
9) Turn off QueryParser
10) Note that your results are exactly the same as step 8
(N.B. this is because QueryParser is falling back to non-QP mode
instead of producing a bad query.)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Zebra is not designed to have persistent connections, under cgi this
didn't matter the scripts would get a new connection each time, but
under plack we try to use dead connections
This patch changes it so plack works the same way that cgi did.
To test:
Apply this patch
Do some searches
Check everything still works
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
This sub was causing 2 bugs :
- tools/exports.pl --clean was removing Â
- authority search plugin used in cataloging was removing  in suggested authorities displayed dynamicly (using ajax)
After applying the patch,
- NSB/NSE are still removed by nsb_clean
- tools/exports.pl --clean is no more removing Â
- authority search plugins is no more removing Â
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- The shibboleth patch introduced an undefined message into the error
logs, when shiboleth is disabled.
Testplan
1. Ensure shibboleth is disabled.
2. Refresh any opac page
3. See 'Use of uninitialized value $ENV{"REMOTE_USER"} in string ne at
/home/koha/kohaclone/C4/Auth.pm line 711.' popup in the opac-error.log
4. Apply patch
5. Refresh opac page
6. Error should no longer appear
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On top of Bug 8375
If you print a label using arabic/hebrew script,
letters are printed in logical direction, from left
to right, giving a mangled result
This patch will try to fix those cases adding a new
perl dependency, Text::Bidi, and using the automagic
feature if it's log2vis() function to rearrange chars
based on detected text 'direction'
To test:
1. Install Text::Bidi package
(apt-get install libtext-bidi-perl)
2. Try a batch, using Helvetica, with a mix of
ltr and rtl (arabic/hebrew) titles, chars are good,
but direction is bad
NOTE: I suggest changing the mapping for 'HO' font
on koha-conf.xml, from DejaVuSans-Oblique.ttf to
DejaVuSans.ttf to view 'title' chars
3. Apply the patch
4. Try again, now the result is good
Formerly a followup of Bug 8375, look sample pics
on that Bug.
Rebased following changes on Bug 8375
Note: Arabic titles will not be displayed, because
current code selects Oblique variant (unless you
change mapping as suggested on 2. )
Hebrew looks good.
Rebased and move use of new dependency to Labels.pm
Rebased on master
Signed-off-by: Karam Qubsi <karamqubsi@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the help of Bernardo. With the patch
the characters of RTL strings appear in the correct
order in the generated PDF files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The message in circulation.tt assumed to get days but date is given. Updated comments and message depending on expiration date or no expiration of restriction.
The message shows up on top of Bug 643 Allow override of 'debarred' status if a patron has a restriction.
Replaced date_format with date template (see comment #6)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch increases the cn_sort field length to 255 chars.
Modified:
C4/ClassSortRoutine.pm - change the hardcoded cn_sort length to 255
installer/data/mysql/kohastructure.sql - alter tables items and deleteditems,
biblioitems and deletedbiblioitems
installer/data/mysql/updatedatabase.pl - alter tables items and deleteditems,
biblioitems and deletedbiblioitems
Testing:
Before applying the patch:
0) Select an item
1) Edit the item selected
2) Change "Full call number" option to 530 F435_1996 v2p1
3) Save changes
4) Valide 530_000000000000000_F435_1996_ (table items - cn_sort column).
After applying the patch:
5) Edit again the item selected in 0
3) Save changes
4) Valide 530_000000000000000_F435_1996_V2P1 (table items - cn_sort column).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- To correct tests after converting module to dbic, we need to add the
Test::DBIx::Class module as a dependancy.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The dependency will probably need to be packaged by us until
it can get into Debian proper.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Convert Auth_with_shibboleth to use dbic stanzas.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- A number of issues were highlighted whilst writing sensible unit tests
for this module.
- Removed unnessesary call to context->new();
- Global variables are BAD!
- Croaking is a wimps way out, we should handle errors early and
properly.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Local fallback was not very well implemented, this patch adds
better handling for such cases allowing clearer failure messages
- This patch also adds the ability to use single sign on via the
top bar menu in the bootstrap theme.
BUG8446, Follow up: Adds perldoc documentation
- Add some documentation to the Auth_with_Shibboleth module
including some guidance as to configuration.
BUG8446, Follow up: Correct filenames to match guidlines
- Moved Auth_with_Shibboleth.pm to Auth_with_shibboleth.pm to match
other files present on the system.
BUG8446, Follow up: Correct paths after file rename
BUG8446, Follow up: Implemented single sign out
- This follow up rebases the code against 3.16+ which managed to break
some of the original logic.
- As a side effect of the rebasing, we've also implemented the single
sign out element. Upon logout, koha will request that the shibboleth
session is destroyed, and then clear the local koha session upon
return to koha. Due to the nature of shibboleth however, you will
only truly be signed out of the IdP if they properly support Single
Sign Out (which many do not). As a consequence, although you may
appear to be logged out in koha, you might find that upon clicking
'login' the IdP does NOT request your login details again, but instead
logs you silently back into your koha session. This is NOT a koha bug,
but a shibboleth implementation issue that is well known.
BUG8446, Follow up: Fixed bootstrap login via modal
- The bootstrap theme enable login from any opac page via modal. To
enable this with shibboleth we had to make some template parameters
globally accessible when shibboleth is enabled.
BUG8446, Follow up: Add template rules for Shibboleth and CAS
- Add template rules so that CAS and Shibboleth can coexist.
BUG8446, Follow up: Added default config to config file
BUG8446, Follow up: Embellished perldoc documentation
- Updated perldoc to correct detail about configuring shibboleth
authentication.
- Updated perldoc to include subroutines and their respective functions.
BUG8446, Follow up: Enable configuration of match field
- Added clearer, more flexible, configuration of shibboleth attribute to
koha borrower field matching for authentication
- Correcting of documentation to make it more clear to the current
implementation
- Minor refactoring of code to reduce some code duplication
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Use syspref OpacBaseURL instead of ENV{'SERVER_NAME'} as this wont
work if koha is behind a reverse proxy.
- To use multiple vhosts, set OpacBaseURL per vhost explicitly with
'SetEnv OpacBaseURL Value' as per Bug 10325
BUG8446, Follow up: Adds Shibboleth authentication
- Ensure user is returned to requested page after authentication
- Added querystring to the target path in shibboleth URL so
that when a user is authenticated he/she is returned to the
correct page they requested before authentication.
Example where this is important: When a user clicks a direct
biblio link of the form - /opac-detail.pl?biblionumber=12345
BUG8446, Follow up: Remove unused imports from scripts
- Remove import of deprecated C4::Utils module from shibboleth
authentication module: Auth_with_shibboleth.pm
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Use the shibbolethAuthentication syspref to enable Shibboleth authentication
- Configure the shibbolethLoginAttribute to specify which shibboleth user
attribute matches the koha login
- Make sure the OPACBaseURL is correctly set
BUG8446, Follow-up: Adds Shibboleth authentication
- Fix logout bug: shibboleth logout now occurs only when
the session is a shibboleth one.
- Do some refactoring: getting shibboleth username is now
done in C4::Auth_with_Shibboleth.pm (get_login_shib function)
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds redirect to opac after logout
BUG8446, Follow-up: Adds Shibboleth authentication
- Shibboleth is not compatible with basic http authentication
in C4/Auth.pm. This patch fixes that.
BUG8446, Follow-up: Adds Shibboleth authentication
- Use ENV{'SERVER_NAME'} instead of syspref OpacBaseURL in order to work with
multiple vhosts.
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds missing protocol for $ENV{'SERVER_NAME'}
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the feide idp.
- LDAP login and logout are working
- local login/logout are still working
- CAS login/logout are still working
Instructions for setup can be found on the wiki:
http://wiki.koha-community.org/wiki/Shibboleth_Configuration
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems the removal of global variables changes the behaviour
of Test::MockModule, and it now expects the namespace in front
of the statically called method.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In C4::Reports::Guided, a lot of variables was defined at module level
and reused in subroutine.
I didn't find any problem with Plack, so I'm not sure this patch is
useful.
Test plan:
Verify there is no more ^my in the module and you don't find any
regression with the guided reports tools (with and without Plack)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I'm unsure if this is needed, but I have verified it causes no
regressions
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
No regressions spotted. I'd prefer this code to be fully refactored of course :-P
This patch adds a variable to koha-conf.xml controlling the use of Zebra facets.
Usage:
- use_zebra_facets = 1 | 0
Zebra facets work only on DOM.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the following routines to C4::Search
- GetFacets
This is a wrapper routine, that given a ZOOM::ResultSet, extracts
the relevant facets. To do the job, it uses the internal functions:
_get_facets_from_records and _get_facets_from_zebra. The choice is done
on querying the indexing mode: grs1 will use records, and dom zebra's facets.
- _get_facets_from_records
Just refactoring the already existent main loop from getRecords into a function.
- _get_facets_from_zebra
Given a result set, loop through all defined facets in C4::Koha::getFacets
and call _get_facet_from_result_set for each, to build the facets
information. It retrieves the facets from Zebra's facets.
- _get_facet_from_result_set
Given a result set and a facet index name, retrieve the facets
for the given index, and build the result for rendering.
To test this preliminay work:
- Apply the patches, install on DOM, using MARC21, NORMARC and UNIMARC.
- Reindex some DB with lots of records.
- Check facets work.
Note: UNIMARC is the only dialect that has more than one subfield (concatenated)
for facets values, so it is better to test on uNIMARC. The approach leaves room
for re-thinking facets in MARC21/NORMARC, but it is outside of the scope of the bug
(e.g. we could have more author facets)
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: David Cook <dcook@prosentient.com.au>
Seems to work with DOM and MARC21.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If an item is edited and a field is not mapped to Koha, it is to 0 or
NULL (depending on the default value defined).
This patch adds a check on the mapping before editing the item. It there
is no mapping, the DB value is not erased.
Test plan:
1/ Edit an item and fill a value for a field
2/ Unmap this field
3/ Edit the item
4/ Verify that the value is not erased (using the MySQL CLI)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Make the caching more correct. Also removes a warn that got left behind.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Authorised values are now cached using the proper Koha::Cache mechanism,
rather than a simple internal cache. Memoize has been removed because it
didn't really work like we needed it to.
Test plan:
* running a persistent environment:
* load the edit item screen
* refresh several times to ensure any process-based caches are filled
* add a new LOC authorised value as fast as possible (prepare it on
another tab.)
* refresh the edit item page
* note that the new LOC value may or may not be showing in the
"shelving location"
* if more than 5 seconds have passed since saving it, it must now show
up.
* refresh a few times to ensure that it's showing on all processes.
Note:
* This patch depends on the caching changes of 9967.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix the subroutine name and add a restriction on the
arguments: both argument are mandatory!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
User may cancel his own reservation at waiting or in transit status
through calling opac-modrequest.pl. Cancel button is disabled in
interface but possibility to cancel should be checked also in
opac-moderequest.pl, before calling CancelReserve().
Similar situation is with opac-modrequest-suspend.pl
This patch provides new soubroutine to chceck if user can cancel given
reserve. It's possible only when he's owner of hold and hold isn't in
transfer or waiting status.
Additionaly there are new test for this function in Reserves.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and new tests.
Works as described, tested with:
.../cgi-bin/koha/opac-modrequest.pl?reserve_id=XXX
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes hardcoded descriptions and sets them in the templates
using the variable content as id.
To test, create a new guided report and verify the 'module to report on' dropdown
shows as usual [1]. Functionality shouldn't get changed.
The patch also changes the dictionary pages where 'area' should be displayed/selectable
with the same strings as the guided reports. Try all the possible disctionary pages.
The last page when creating a dictionary now shows the 'area description' instead of the
code. The same happens to the dictionary list once you have dictionaries saved.
[1] The following texts get changed:
Catalogue -> Catalog
Acquisition -> Acquisitions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the patron has amassed charges that block borrowing, but we
allow staff override the information that the patron cannot
issue should be included the patron information response
This patch sets the appropriate status fields in the patron object
It restores the fee_limit member to the patron object
and calls a local subroutine to set it.
This could be done more elegantly but that would require more
major refactoring of the rather messy initializer code
in ILS::Patron
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a patrons fines exceed noissuescharge and we allow
staff to allow issue at their discretion via an override
the SIP process allowed charges to go ahead.
This patch closes the loophole which allowed self issue
to subvert the usual library loan policy
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CancelHold takes two parameters: patron_id and item_id.
If item_id is considered as an itemnumber, holds on title can't be
canceled.
If item_id is considered as a biblionumber, all holds on this
biblionumber (for a borrower) will be canceled.
So CancelHold have to consider item_id as a reserve_id.
- Added subroutine C4::Reserves::GetReserve
- C4::ILSDI::Services::GetRecords now returns the reserve_id
- Fix the text in the ilsdi.pl?service=Describe&verb=CancelHold page
- Unit tests for CancelReserved and GetReserve
- Do not delete row in reserves table if insert in old_reserves fails
Signed-off-by: Leila and Sonia <koha.aixmarseille@gmail.com>
Signed-off-by: Benjamin Rokseth <bensinober@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signing off, while noting a style issue in the patch review
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Placed and cancelled a hold using ILS-DI successfully.
Adding a follow-up to also update the ils-di documentation
page in the bootstrap theme.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
EDIT: I removed the changes it did to the prog theme.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Ratings.t
3) Note all unit tests pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Also tested:
- Adding a rating
- Rating displayed on detail
- Rating displayed on results
- Modifying a rating
- Change displayed correctly on detail and results
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
NewOrder should be more tested!
This patch moves the existing unit tests into a new file and adds some
unit tests.
Note that there is no DB field aqorders.subscription, so the test in
NewOrder can be removed.
Test plan:
prove t/db_dependent/Acquisition/NewOrder.t
and
prove t/db_dependent/Acquisition.t
should return green.
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since the basketno parameter is needed to insert an order, it is useless
to return it.
This patch changes the prototype for the C4::Acquisition::NewOrder
subroutine. The return value is now a scalar containing the ordernumber
created.
Test plan:
Verify there is no regression on an acquisition workflow:
1/ Create an order with several items
2/ Modify the order
3/ Receive some items
4/ Cancel the receipt
4/ Receive some items
5/ Receive all remaining items
6/ Cancel the receipt
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The behavior is quite weird, but
$schema->resultset('Table')->create($data)->id
does not return the id inserted if $data contains the key.
To be more clear, in this case
$schema->resultset('Aqorder')->create($new_order)->id
returns an empty string because $new_order->{ordernumber} is an empty
string!
This was not caught by the unit tests, I added one.
Test plan:
- AcqCreateItem set to ordering
- Create an order with items and verify items are correctly linked to the
order.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed that without the patch the created item is not linked to the
order (entry in aqorders_items). With the patch, it works as expected.
Passes tests and Koha QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox for "Automatic renewal" to the checkout page.
CanBookBeRenewed is modified to include two new errors:
- auto_renew (renewal shouldn't be done manually)
- auto_too_soon (renewal is premature and shouldn't be done manually)
To test:
1) Add or edit an issuing rule with "Automatic renewal" and another
one without it.
2) Issue at least three items:
- automatic renewal by issuing rule
- automatic renewal by Checkbox on the checkout page
- no automatic renewal
3) Test the following steps for both:
Home > Circulation > Checkouts
Home > Patrons > Patron details
4) Confirm that issues with automatic renewal cannot be renewed manually,
even if there are still renewals left and it's not too soon to renew.
5) Confirm that "Scheduled for automatic renewal" and the remaining
renewals are displayed. If no renewals are left "Not renewable" should
be displayed.
6) Confirm that issues without automatic renewal behave as usual.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This fixes regression introduced by Bug 6536 so that multiple
words in title search will work.
Test scenario:
1. try z39.50 search with more than one word
2. verify that no results apper
3. apply patch and re-run search
4. verify that there are results
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you suspend a hold, the item does not show Available. It still shows
the person next in line, who isn't eligible for the hold yet because of
the suspension. This is not the case for a delayed hold, where you
originally place the hold and tell it not to start until a future date.
If you do that, it shows as Available. This is confusing and
inconsistent.
Test Plan:
1) Create an item level suspended hold for a record with no other holds
2) Note in the record details that the hold shows an item level hold
3) Apply this patch
4) Refresh the record details page, note the item is "Available"
5) Optional: prove t/db_dependent/Holds.t t/db_dependent/Reserves.t
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the receipt in not on the whole order but only on a part of it, the
change should be done on the itemnumber linked to the "new order", the
one we are reverting.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8307 introduces the AcqItemSetSubfieldsWhenReceived pref.
You can now update an item field on receiving (if you create items on
ordering).
But if the receipt is cancel, there is no way to revert these changes.
This patch adds a new pref AcqItemSetSubfieldsWhenReceiptIsCancelled to
allow to revert changes previously done on receiving
Test plan:
0/ Set the AcqCreateItems to 'ordering'
1/ Fill AcqItemSetSubfieldsWhenReceived with o=1 (UNIMARC) or 7=1
(MARC21).
2/ Fill AcqItemSetSubfieldsWhenReceiptIsCancelled with o=2 (UNIMARC) or
7=2 (MARC21)
3/ Create an order with some items
4/ Receive the order and verify the notforloan value is set to 1
5/ Cancel the receipt and verify the notforloan value is set to 2
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before Bug 9811, the patron search searched on extended attributes.
This patch restore this behavior.
Test plan:
0/ Create a patron attribute PA
1/ Create a patron A (cardnumber CNA) with PA="foo"
2/ Create a patron B (cardnumber CNB) with PA="foo bar"
3/ Search for CNA should redirect on the patron detail page.
4/ Search for "foo" should display the search result with 2 results.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
'Searchable' patron attributes can now be searched for again.
Works as described, passes stests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the commented line for permanent_location.
It adds a more general comment.
Adjusts the exists check on permanent_location.
Adds a reference to bug 12817 that will deal with paidfor similarly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A quick fix to prevent more damages.
No perceived side-effects so far.
Signed-off-by: David Cook <dcook@prosentient.com.au>
This is actually a perfectly good fix for this issue. I've changed
the explanatory comment to explain why.
Another option would be to remove the 'exists' check in the sub
_do_column_fixes_for_mod(), but this is just as functional.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Detailed comment on Bugzilla.
Adding a small follow-up.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The cronjob longoverdue.pl does not require that an item marked as lost
be returned automatically, but there is a line in ModItem that
automatically marks the item's onloan as false if itemlost is set!
Test Plan:
1) Mark an item as lost with longoverdue.pl, without --mark-returned
2) Inspect the db, note that items.onloan is now 0
3) Apply this patch
4) Mark repeat step 1
5) Inspect the db, noe that items.onloan is still 1
6) Test marking an item as lost from staff interface,
ensure there are no regressions.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works according to test plan and fixes a data loss bug.
Some notes:
- This patch would be nicer with a regression test.
- Also checked that returning the item removes lost status and onloan still.
- Tried to test with --mark-returned, but couldn't get it to
return my item neither with nor without the patch. (see comment on
bug report)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the $facets_info calculation from the _get_facets_data_from_record
sub so it is not done for each record. It introduces a new sub, _get_facets_info
that is called from the getRecords loop, that does the job only once.
To test:
- Apply on top of the previous patches
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: _get_facets_info gets tested and it passes for both MARC21 and UNIMARC.
Facets rendering should remain unchaged on the UI.
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a test for field 100, to skip it on facet calculation
if ind1=z.
To test:
- Have IncludeSeeFromInSearches set.
- Create a biblio record, when adding an author, create a new authority record
that contains a 400$a field (see from).
- Rebuild zebra db.
- Search for the record making sure the search returns more than one record.
=> FAIL: the facets contain the 'see from' field.
- Run
$ prove -v t/db_dependent/Search.t
=> FAIL: it fails
- Apply the patch
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: it passes
- Re-run the search, notice the 'see from' doesn't show anymore on the facets.
- Sign off :-D
Edit: minor stylistic change
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch refactors the facet extraction loop into a proper function.
The loop is changed so the MARC::Record objects are created only once
instead of the old/current behaviour: once for each defined facet (in
C4::Koha::getFacets).
To test:
- Apply the patch
=> SUCCESS: verify facets functionality remains unchanged.
- Run:
$ prove -v t/db_dependent/Search.t
=> SUCCESS: tests for _get_facets_data_from_record fail, because
100$a is considered for fields with indicator 1=z (field added
by IncludeSeeFromInSearches syspref).
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some libraries would like the ability choose to display the home branch
on search results while having circulation rules based on the holding
branch. This is currently impossible because both the display of the
branch in search results, and the selection of the home or holding
branch for circulation rules are controlled by the same system
preference: HomeOrHoldingBranch. This preference is described as being
used only for circulation rules, and makes no mention of its use for
display control. The display control should be split off into a separate
preference.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the value of the new system preference StaffSearchResultsDisplayBranch
matches the current value of HomeOrHoldingBranch
4) Set the preference to home branch
5) Perform a staff catalog search with results having items with differing home and
holding branches.
6) Note the home branch displays
7) Set the preference to holding branch
8) Repeat step 5
9) Note the holding branch displays
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, logic is now tied to a new system preference.
Passes tests and QA script.
Test Plan:
1) Set ExpireReservesMaxPickUpDelay
2) Set ReservesMaxPickUpDelay to 1
3) Place a hold, set it to waiting
4) Using the MySQL console, modify the waiting date and set it to the
day before yesterday.
5) Set today as a holiday for the pickup branch in question.
6) Run misc/cronjobs/holds/cancel_expired_holds.pl
7) The hold should remain unchanged
8) Remove today as a holiday
9) Run misc/cronjobs/holds/cancel_expired_holds.pl again
10) The hold should now be canceled
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch sponsored by the CCSR ( http://www.ccsr.qc.ca )
This new patch builds on the work of Bug 12164 by allowing the
user to enter a new name (budget_period_description) for the
cloned budget.
A test was added to t/db_dependent/Budgets.t.
Sponsored-by: CCSR
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edit: added the sponsored-by line.
Currently, if you have holds charges, they are not taken into
consideration when circulating items.
Manual Invoices, and rental charges are governed by a systempreference
Holds are never counted
And all other charges (overdues, lost items etc) are counted
This patch adds a systempreference to allow Hold charges to be counted
as well.
To test
1/ Set a borrower category to have holds charges
2/ Place a hold for a borrower in that category
3/ Go to checkout, notice that charge is not showing or blocking on
that screen
4/ apply patch
5/ notice that charge now shows on checkout
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This adds entries for 690-699 to the authorities linker, so they get
linked up like everything else.
To Test:
* make sure your framework doesn't have 690 set up to link to
authorities (or it'll get linked as part of cataloguing.)
* add a subject with some term to the 690$a field.
* add an authority for TOPIC_TERM with the matching term.
* make sure zebra is up to date.
* run link_bibs_to_authorities.pl over your system.
* check that the authority is now linked to your record.
* repeat with the other 69x fields if you like.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using 696a (PERSO_NAME). Works as described, no errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, but linked authorities won't search
correctly when clicking on the link on the detail page,
as the 69x $9 is not indexed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes GetMarcISSN test for empty subfield before pushing to the
result array.
To test:
- Run the regression test
=> FAILS for all MARC flavours
- Apply the patch
- Run the regression test
=> SUCCESS: tests pass
- Sign off
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The last test on the first series, fails randomly on Perl 5.18:
not ok 12 - Third query makes no difference
# Failed test 'Third query makes no difference'
# at t/db_dependent/Breeding.t line 104.
# got: ''
# expected: '1'
# Looks like you failed 1 test of 12.
not ok 1 - _build_query
This change makes tests pass. Please consider if this needs to be fixed
(i.e. sort order matters) or the test needs to be rewritten.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I agree with adding the sort. (The need for doing this in Perl 5.18 is another
topic.)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Resolved:
[1] FAIL C4/Breeding.pm
FAIL critic ControlStructures::ProhibitMutatingListFunctions
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No warnings anymore.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch only removes surrouding spaces at comma and equals-sign while
passing the options in sru_fields to the ZOOM object.
Test plan:
If you add spaces between options in sru_fields, searching should still work.
E.g. sru_fields= sru = get , sru_version = 1.1
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Use the stylesheets listed in field add_xslt of z3950servers to transform
search results of Z3950/SRU search.
Additionally, the template has been changed to make more error messages (or
warnings) visible when displaying results. Until now, error message were
shown in the results table and when connection errors occurred, no results
were displayed at all.
Test plan:
Create some stylesheets (or see the sample patch on bug 6536).
Add these stylesheets to some Z3950/SRU servers.
Do Z3950 search and verify the transformations.
Do a search with 2 targets; make one target fail (by manipulating its server
data). Do you see the connection error and the results for the other target?
Generate a XSLT error by modifying one stylesheet. Check search results. You
should see warnings.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to include SRU servers in Z3950 search.
It adjusts the Z3950Search routine in Breeding module.
It also replaces SQL code with DBIx statements in Breeding.pm/Z3950Search
and the associated scripts z3950search.pl in cataloguing and acqui.
Test plan:
Verify if a normal Z3950 search still works in cataloging/acqui.
Add a SRU target. (You could just use Koha's port 9998.)
Define sru_options like sru=get.
Use that target in a Z3950 search in cataloging and acqui. (Import.)
Test sru_fields translation by comparing search results between various
settings for some of the fields. For instance, leave title empty and
after that set it to the title field of your SRU target.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Replaces name by servername, type by servertype for running Z3950 search.
Limit search scripts to zed (z3950) servers until sru is supported.
Test plan:
Perform a Z3950 search in Cataloguing and Acquisition.
Verify that it still works as it did.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutine NewOrder uses DBIx::Class instead of C4::SQLHelper.
Test plan:
1) Apply the patch
2) Execute the unit tests by launching :
prove t/db_dependent/Acquisition.t
3) The result has to be a success without error or warning :
t/db_dependent/Acquisition.t .. ok
All tests successful.
Files=1, Tests=79, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.80 cusr 0.09 csys = 1.94 CPU)
Result: PASS
4) Log in the koha intranet and create a new order in the acquition module
5) The creation has to be a success
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, new order created without problem, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested creating a new order from a subscription, no problems found.
Passes tests and QA script.
This patch makes it possible to choose a particular contact for
acquisitions and serials claims. To test:
1) Select a contact to use for claiming late orders and a contact
to use for claiming late issues.
2) Send a claim for a late order and a claim for a late issue.
3) Note that the claims went out to the proper people.
4) Run the unit test with:
> prove t/db_dependent/Letters.t
5) Sign off.
Note: the claim messages are recorded in the logs in the *Acquisitions*
module, not the Letters module as you might expect
This patch also fixes several perlcritic violations and centralizes
contact-related unit testing in Bookseller.t.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some vendors may have more than one contact. For example, a technical
contact and a billing contact, or a contact for journals and a contact
for monographs. Rather than require that each contact be either made
into a separate vendor or recorded somewhere outside of Koha, it would
be really useful of Koha had the ability to add multiple additional
contacts to vendors in the Acquisitions module.
To test:
1) Apply patch.
2) Edit a bookseller, making sure to add a contact.
3) View the bookseller's information, making sure the contact
information is there.
4) Run the unit test:
> prove t/db_dependent/Bookseller.t
5) Add multiple contacts to a vendor, see that they show up.
6) Delete one contact from a vendor with multiple contacts,
see that the result is correct.
7) Sign off.
Note: This test plan can supersede that on the previous two patches,
as all functionality of the previous two patches is required by this
one.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch normalizes the data structures used for bookseller
contacts.
To test:
1) Repeat tests described on previous patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In preparation for adding the ability to handle multiple contacts, this
patch moves booksellers' contacts into their own class,
C4::Bookseller::Contact.
To test:
1) Apply patch.
2) Run database update.
3) Edit a bookseller, making sure to add a contact.
4) View the bookseller's information, making sure the contact
information is there.
5) Run the unit test:
> prove t/db_dependent/Bookseller.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This development introduces ColVis into Koha and provides a configuration
page for columns visibility.
ColVis is a plugin for DataTables. It allows to change the visibility of
the columns in the table.
* This development adds:
- the js and css file for ColVis
- a new DB table 'columns_settings'
- a new template plugin 'ColumnsSettings'
- a new package C4::Utils::DataTables::ColumnsSettings
- a new admin page admin/columns_settings.pl
* How it works:
A yaml file is created (admin/columns_settings.yml) in order to take an
inventory of all tables where ColVis is implemented. This file is read
to create the list of modules, pages and tables in the configuration
page.
There are 3 possible keys in the yml:
- is_hidden: default is 0
The column will be hidden.
- cannot_be_toggled: default is 0.
ColVis will allow to hide/show the column.
- cannot_be_modified: default is 0
Default values (in the yml) won't be modifiable.
When a user changes (or saves) the configuration for one module, all
columns are added to the DB table. The values in the DB get the upper hand
on the yaml values.
* Humm, strange?
It seems weird to have 2 storages for the same values. But I
think it will be easy to add an entry and maintain the yaml rather than
adding a new row (and new entry in updatedatabase script) in the DB.
* To go further: We can imagine that the configuration is saved for each
user (and not globally like it is made with this patch).
This patch cannot be tested as it, you need to apply the "POC" patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, more comments on last patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
News will not display on the last day of each month due to the
way the date is calculated in the SQL code for grabbing news.
Test Plan:
1) Create a news item that should display
2) Change your server's date to the last day of the month
3) Note you can no longer see that news item
4) Apply this patch
5) Note you can now see your news item again
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If multiple registrations are submitted, the first patron to register
will be used for the first patron to click the registration confirmation
link!
Test Plan:
1) Submit 2 new patron registrations
2) Use the confirm link from the 2nd registration
3) Note you end up registering as the first submitted registration
4) Apply the patch
5) Repeat steps 1 and 2
6) Note you are now confirmed correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Test plan appears to work fine, I have a feeling the sql could be
written better but can't come up with it on a Sunday morning
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a critical bug.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the moment, $dateonly is set to true when $1 is defined. However,
since the regex capture group only includes the time, this flag will
only be set when there is a value that includes a time.
In effect, this means that timestamps are reduced to dates only,
while dates have 00-00-0000 added to them.
This patch keeps the logic but reverses the values, so that $dateonly
will default to true unless $1 is defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Overdue notices are using the MySQL date format and not the dateformat
in the system preferences.
Test Plan:
1) Enable checkout notices for a patron, make sure the date due is in
the notice.
2) Check out an item to that patron, note the date is in the mysql
datetime format
3) Apply this patch
4) Check out another item to the patron, not the date is now in the
preferred date format.
Signed-off-by: David Cook <dcook@prosentient.com.au>
I love this patch! It is the best solution to this problem that I've
seen. I think it is set up to perfectly handle dates in the notices.
Unfortunately, the $dateonly flag is backwards, so the time is stripped
from timestamps and 00:00:00 is added to dates without times.
I'm adding a follow-up to reverse the setting of this flag.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This changes the existing framework caching, which was using memoisation
if memcached was available, and memory in all cases, to use the
Koha::Cache system. This uses memcache if possible, and in-memory
otherwise. However it also clears the cache when the framework updates,
making sure that the changed version will be picked up.
Note that the in-memory cache clears itself after 10 seconds, so that if
memcached isn't available, this is the longest that old versions will
hang around.
Test plan:
* work through
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11842#c0
and make sure that the erronious result doesn't occur.
Note:
* The patch on bug 12041 is required for this to work.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Overdues::GetBranchcodesWithOverdueRules routine has a bug.
If a default rule *and* a specific rule exist, only the branchcode for
the specific rule is returned.
Test plan:
prove t/db_dependent/Overdues.t
and verify the unit tests are consistent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Go to Tools > Import patrons
- Notice branchcode and categorycode don't have dropdown menus with
valid options.
- Notice dateofbirth, dateenrolled and dateexpiry don't have date-pickers
- Notice each input field is labeled with the column name instead of a
proper description.
To test:
- Apply the patch, go to Tools > Import patrons
- Notice branchcode and categorycode have dropdown menus with valid options,
and by default the empty value is selected.
- Notice that if you go into the dateofbirth, dateenrolled and dateexpiry
fields, a nice date picker widget appears.
- Notice each field is labeled with the field description, and that the
column name is conveniently shown at the right of the input field.
Important: test switching the ExtendedPatronAttributes syspref, and verify that
if enabled, the patron_attributes field appears, and also the checkbox selector
controlling the extended patron attributes import behaviour shows too.
Bonus points: Verify that on a different language, the descriptions get translated,
and the column names show correctly
Regards
To+
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no regressions found.
Dates are output in ISO/database format, this is ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes only instance in this file.
Problem is that there are many template files
involved. Most of them have other instances of
scrolling_lists but is a problem for other bugs,
they will depend on this.
What is replaced is a pulldown for delimiter choices.
In all but one case the code is the same (variable name change),
and I did a little tidy of the TT code
To test:
1. Apply the patch
In all the following cases, check delimiters pulldown (Output box, bottom right)
2. Go to Reports > Statistics wizard > Acquisitions
3. Go to Reports > Statistics wizard > Patrons
4. Go to Reports > Statistics wizard > Catalog
5. Go to Reports > Statistics wizard > Circulation
6. Go to Reports > Statistics wizard > Serials
7. Go to Reports > Statistics wizard > Holds
there is a bug here, pulldown next to this must show 'CSV' option,
but shows nothing. Will be fixed
8. Go to Reports > Other > Average loan time
9. Go to Reports > Top lists > Patron checking out the most
Here there is a 'Delimiter' label before delimiters, only case
10. Go to Reports > Top lists > Most-circulated items
11. Go to Reports > Inactive > Patrons who haven't checked out
There is and inconsistency here, name of option on reports page,
and name on this report, 'Patrons with no checkouts'
Followed test plan. Pulldowns display as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It is kosher now to use the Koha template toolkit plugin for retrieving
system preferences values. This followup does that.
It also changes the class for ids, for people considering this patch
introduces too much noise on the home screen being able to control
its visibility.
Regards
To+
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Enable staff to setting a text for OPAC user/pass information
Modified:
C4/Auth.pm
koha-tmpl/opac-tmpl/bootstrap/en/includes/usermenu.inc -add a text to the popup login page
koha-tmpl/opac-tmpl/bootstrap/en/includes/opac-main.tt -add a text to the main login page
Testing:
I Apply the patch
0) Search NoLoginInstructions preference
1) Add/modify a text
2) Open OPAC main page
3) Validate the text added under Login button
4) Click in "Log in to your account" link
5) Validate the text added under input password (popup)
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On a Perl 5.18 environment (e.g. Ubuntu 14.04 LTS):
To reproduce:
- Have UseQueryParser == "Don't try"
- Perform a search typing just a word that would have many matches on your Zebra db.
- Take note of the search results count.
- Make sure you have the queryparser.yaml file in your config dir.
- Set UseQueryParser == "Try"
- Perform the same search a couple of times
=> FAIL: Notice that the search results count differs from one run to the other.
- Run the regression tests
$ prove -v t/db_dependent/QueryParser.t
=> FAIL: tests fail
To test:
- Apply the patch
- Run tests
$ prove -v t/db_dependent/QueryParser.t
=> SUCCESS: tests pass
- Repeat the steps 'To reproduce'
=> SUCCESS: Search results count is deterministic :-D
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Now search with QueryParser always returns the correct number of
results on a system with the newer Perl version.
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A use C4::Charset was added deep in the body of the code
we have already imported it at the top of the file
(the by convention normal place) As use is executed at compile time
specifying it in the code body does not serve a
useful purpose and detracts from the readability of an already
overly complex subroutine.
Remove the superfluous statement
also removed the tabs introduced to the surrounding lines
by the same commit
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Search still works, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch covers LDAP auth_by_bind configuration so that wrong
LDAP password will return -1 to C4::Auth so we can abort local auth
and prevent users logging in with stale database passwords.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=8148
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=8148
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CCSR having been deprecated there is no longer a use for the
OpacShowFiltersPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When deleting a list the operation is blocked if there are items still
on the list, and the interface shows a warning which includes a count of
the items on the list. This count is broken for lists containing more
items than the number specified in the numSearchResults system
preference.
This patch corrects the item count to use an actual count of the total
number of results, not the total number of results in the first page of
results.
The template change to the staff client copies some language logic from
the OPAC template for dealing with a single number of list entries.
Test in both the OPAC and the staff client.
Check the number specified in the numSearchResults system preference and
locate or create a list containing more than that number of items. Try
to delete the list. You should receive a warning message stating the
correct total number of items on the list.
Test also with a list which contains fewer than numSearchResults
entries, and a list which contains zero entries.
Signed-off-by: Ian Beardslee <ian@catalyst.net.nz>
Tested Public and Private lists with 0, 5 & 25 entries, Public with 40 and Private with 45. Working as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When you try to export the result of tools/viewlog.pl in csv, file
cannot be correctly loaded :
- newline is missing after each record,
- strings should be enclosed in ""
- columns are not the same as for screen output
This patch corrects this by using like other export Text::CSV.
Adds a header line made with the keys of first data. For that, all data
values are initialiszed with empty string.
Test plan :
- Use a database with some logs, see sysprefs
/cgi-bin/koha/admin/preferences.pl?tab=logs
- Go to export page /cgi-bin/koha/tools/viewlog.pl
- Select a module
- Click on "To a file" and choose a file name
- Click on "Submit"
- Open file
=> Without this patch : newline is missing, multi-lines cells are not
enclosed in "", there are no column headings
=> Without this patch : each line is a data line, complexe cells are
enclosed in "", there are column headings
- Test the export of all modules to see that all headings are necessary
- Check the output to screen in the browser
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
The CSV export is significantly improved. I question the usefulness of
including biblioitemnumber in the output. A better inclusion would be
itemnumber.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
While this feature is still not perfect, this is a big improvement.
Passes tests and QA script, restores basic functionality.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the patron search results page there are several patron fields which
do not show: street number, road type, and state. This patch adds them.
To test, go to Patrons -> Search patrons and perform a search. In the
table of patron search results each patron record should display the
correct information including street number, road type, and state.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described.
This patch removes only instance in this file
To test:
1. Apply the patch
2. (Esay way) Put on staff URL
/cgi-bin/koha/services/itemrecorddisplay.pl?biblionumber=N&itemnumber=M
3. Code replaced corresponds to pulldowns, verify information
is correct (check with another item edit view)
PrepareItemrecordDisplay() in Items.pm is filled with chunks of
HTML code that must be put on TT file. For now scrolling_list
is the only removed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested different item edit displays and the URL given above,
no regressions found. Also passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes only instance in this file.
Also updates getframework POD on C4/Koha.pm,
adds new GetFrameworksLoop() func on same file from
suggested code, but with ordered result.
To test:
1. Apply the patch
2. Enable viewLabeledMARC syspref
3. On staff, search for a record, goto detail view
4. Clic on Labeled MARC
5. Framework pulldown was replaced, check changing
framework.
A bug was fixed, because selecting any fw and then Default
tries to load values from 'Default' fw code, which does not
exists.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When doing aquisitions and ordering from external z3950 targes, the item price is not inferred from the MARC record when the NORMARC framework is set.
This patch makes GetMarcPrice treat NORMARC the same as MARC21.
Test plan
* Setup Koha with NORMARC framework
* Add a norwegian z3950 search target (ex: z3950.bibsys.no:2100, database=BIBSYS)
* Create a new basket, and add order to basket from external source
* Search for a tile (ex: ISBN 8205341834) from the bibsys z3950 server
* Click to order the title
* Observe that vendor price is not set
* Apply patch, repeat search for same book
* Order, and observe the vendor price is filled in from the MARC record
http://bugs.koha-community.org/show_bug.cgi?id=12554
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described. No errors.
Tested changing marcflavour syspref to NORMARC,
and following test plan, bug exist and is fixed.
Changed bug description on patch, too long :)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch adds a check for NORMARC to provide the same functionality
as for MARC21. No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current GetMarcISBN implementation returns an array of ISBN
in which all subfields of a ISBN field occurence are appended.
For example, in MARC21, if you have $a and $c defined, they will
be appended for output. This happens for $z.
To reproduce:
- Run the regression tests attached to this bug.
To test:
- Apply the patch, regression tests pass.
- Sign off
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Now test pass, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CGI::url_param() also returns deleted parameters so we have to check
with CGI::param() too.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Took a while to get it working, but I can confirm CAS login is not
working without this patch, but does with it.
Some notes:
In order for this to work you have to add http:// in front of your
OpacBaseURL.
You will also need a CAS test server and install the certificate
on your system.
Tested with CAS test server provided by Biblibre.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A compile time warning was being generated because \ does not quote
{ Replace the plethora of \ before meta and presumed meta characters
by \Q \E which gets perl to generate all the necessary escapes, we can
assume it knows its regex engine as well or better than the human
programmer
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified change reading the perldoc and also checked that
./misc/link_bibs_to_authorities.pl is no longer showing
the warn and still works.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described, running:
prove t/db_dependent/AuthoritiesMarc.t
doesn't show the warning anymore.
With this patch, the subroutines GetContract, GetContracts, AddContract, ModContract and DelContract uses DBIx::Class instead of C4::SQLHelper
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t
3) The command has to be a success :
t/db_dependent/Contract.t .. ok
All tests successful.
Files=1, Tests=43, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.49 cusr 0.05 csys = 1.59 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct, then cancel
17) Click on "Delete this basket"
18) Click on "Contracts" (in the left menu) in order to go on aqcontract.pl, then "Delete" the created contract
19) The contract is not displayed anymore in the vendor page
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Tested on top of Bug 12493
Tests pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fix in order to respect the coding guidelines
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch includes:
- the subroutines GetContract and GetContracts has been moved from C4::Acquisition.pm to C4::Contract.pm and adapted for a general use
- adaptation of acqui/basket.pl, acqui/basketheader.pl, acqui/neworderempty.pl, acqui/supplier.pl and admin/aqcontract.pl
- the unit tests for the module C4::Contract.pm
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t t/Acquisition/ t/db_dependent/Acquisition/ t/db_dependent/Acquisition.t
3) The command has to be a success :
t/db_dependent/Contract.t ................................. ok
t/Acquisition/CanUserManageBasket.t ....................... ok
t/Acquisition/Invoice.t ................................... ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Acquisition.t .............................. ok
All tests successful.
Files=10, Tests=284, 15 wallclock secs ( 0.11 usr 0.02 sys + 12.88 cusr 0.77 csys = 13.78 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with both patches applied.
Works as described following test plan, all points (I did 14 first)
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adding unit tests for the routines AddMessage, GetMessages, GetMessagesCount and DeleteMessage in t/db_dependent/Members.t
Adding unit tests for the routines GetPendingIssues and GetAllIssues in separate files : t/db_dependent/Members/GetPendingIssues.t and t/db_dependent/Members/GetAllIssues.t
The routine GetAllIssues has been modified because it does not test if the arguments was defined :
- the borrowernumber argument is required
- if the order argument is not given, it takes a value by default : 'date_due desc'
- the limit argument is optional
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Members.t t/db_dependent/Members/GetAllIssues.t t/db_dependent/Members/GetPendingIssues.t
3/ The result has to be a success without error or warning :
t/db_dependent/Members.t ................... ok
t/db_dependent/Members/GetAllIssues.t ...... ok
t/db_dependent/Members/GetPendingIssues.t .. ok
All tests successful.
Files=3, Tests=83, 5 wallclock secs ( 0.06 usr 0.01 sys + 4.68 cusr 0.26 csys = 5.01 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: perltidy on t/db_dependent/Members/*
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This followup replaces $params with %$params in keys function
It also fixes some wording
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- refactors C4::Stats::UpdateStats (it now takes a hashref as unique parameter, instead of a list of parameters)
- add UT for it
- change the calls made to this sub in C4::Accounts and C4::Circulation
Additionnaly it also
- adds POD to C4::Stats::TotalPaid
- adds some comments to C4::Stats::TotalPaid (I think I found some errors in it)
To test :
1. run "prove t/db_dependant/Stats.t -v"
2. make some circulation operations (checkout, checkin, renew, localuse)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
3. make some fine payments operations (writeoff, payment)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
Note that there is probably an issue to fix in Accounts.pm : the user is saved instead of the branch. But this is not the purpose of this patch, so I kept the previous behavior for the moment.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work, test pass, isse/return/writeoff recorded on statistics
Removed a "=back" to make happy koha-qa
No other errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
DelItem should return 1 if the item has been deleted, otherwise 0.
Test plan:
Verify that t/db_dependent/Items/DelItem.t returns green
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To delete an item, only the itemnumber should be mandatory. The DelItem
routine can retrieve the biblionumber from the itemnumber.
Test plan:
Verify that t/db_dependent/Items/DelItem.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since C4::Context->dbh shares the DB handler, it's useless to pass it to
routines.
Test plan:
Try to remove an item from the Koha interface.
Verify that unit tests pass.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When using the backdating of returns feature, an item that is not
overdue is treated as being as many days overdue as it is *not* overdue.
This is due to the fact that _get_chargeable_units appears to return the
difference between the return date and the due date without
consideration the return date being earlier than the due date.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Circulation.t
3) Note the failure
4) Apply the second patch
5) prove t/db_dependent/Circulation.t
6) Note there are no failures
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes some badly named variables also
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, you need to activate SpecifyReturnDate.
I confirmed the problem and verified that the bug fixes it
by running the tests, but also by testing in staff.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As of http://perldoc.perl.org/functions/keys.html we should avoid passing
a scalar parameter as it is not backwards compatible with squeezze's Perl
version (5.10).
Cite:
"Starting with Perl 5.14, keys can take a scalar EXPR, which must contain a
reference to an unblessed hash or array. The argument will be dereferenced
automatically. This aspect of keys is considered highly experimental. The
exact behaviour may change in a future version of Perl."
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On closing a budget (budget period), the user will be presented with an
option to move remaining unspent funds from the previous budget to the
newly created one - adding to the amounts already entered in those
funds.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the main patch.
On closing a budget period, all unreceived orders are moved from the
old/previous fiscal year into the new fiscal year.
You can rollover funds unused in the previous fiscal year to the new
fiscal year.
This patch set is based on bug 12168 (bugfix) and can be tested on top
of bug 11578 (easier to see the fund structure).
The patch set is cut in 6 main patches:
- Move the budget period clone logic into C4::Budgets
The code is moved from the pl to Budgets.pm and unit tests are provided.
The original code should certainly be buggy since a typo existed.
- On cloning budget period, mark original budget as inactive
Cloning a budget period is already possible in Koha, this patch adds a
checkbox to mark as inactive the original budget. That avoids to edit
the budget and click the "inactive" checkbox. Both do the same action.
- On cloning budget periods, add a "reset all funds" option
Same as before, a new checkbox is added on cloning a budget period. If
you check it, all fund amounts will be set to 0. Otherwise, no change
compared to the existing behavior.
- Close a budget period (budget)
The goal of this patch set is to move unreceived orders from a budget to
another. This patch adds a C4::Budgets::MoveOrders routine which does
this job.
This action is only possible if the fund structure is the same for both
budgets, the budget_code field should be the same.
- On closing budget period, move unspent amount
Unspent amount will be move from the previous budget structure to the
new one.
- Add UI report
This patch only adds a report when closing a budget is done.
Test plan:
Wording: below, budget is a "budget period" and fund is a "budget".
Prerequisite: Having 1 active budget with some funds (with different
levels and different amounts). Order and receive some orders (not all).
1/ Go on the budgets administration page (admin/aqbudgetperiods.pl) and
duplicate the structure of this budget ("Duplicate" link in the
"Actions" column).
2/ Enter start and end date for this budget and mark the original budget
as inactive.
3/ Note that a new budget is created, with the same fund structures (and
same value) and that the old one is marked as inactive (see
admin/aqbudgets.pl page with patches from bug 11578).
4/ Try to close the new budget: it is not possible, there is no
unreceived orders for this budget.
5/ You can close the inactive budget ("Close" link in the "Actions"
column).
6/ Verify the number of "Unreceived orders" is correct and select the
new budget in the budget list. Click on the "Move remaining unspent
funds" if you want to move unspent amounts.
7/ A report view is displayed and show you the ordernumber which have
been impacted (grouped by fund).
8/ Try different configuration, depending on the selected checkboxes.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "reset all funds" (budgets).
If it is checked, the new created budgets (funds) will be reset.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "mark original budget as inactive" (budget
period).
If it is checked, the original budget will be marked as inactive.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note the typo InsertInTable "aqcudgets", note sure about the existing
behavior before this patch!
This patch adds a link "Duplicate" in the action list for budget
periods (budgets).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The opacsmallimage system preference is unused in the bootstrap theme.
It can be removed now that prog and ccsr are deprecated. This patch does
so.
To test, apply the patch and run updatedatabase. Confirm that the OPAC
works properly and the preference can no longer be found.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Before bug 9811, if you searched for "John Doe" and only 1 patron with
this firstname/surname existed, the patron detail page was displayed.
Now the result lists all patrons with ( firstname=john or doe ) or (
surname=john or doe). Which is quite annoying when you expect only 1
result.
Test plan:
0/ Create some patrons like: "John Doe", "Jane Doe", "John Smith".
1/ Search for "John Doe" in the patron search box
2/ Verify you got 2 results
3/ Apply the patch
4/ Search for "John Doe" in the patron search box
5/ Verify you are redirected to the right patron detail page.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's quite common to have [something] within facet data, and it produces following error:
Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE
This problem was intoduced in Bug 12151 but is trivial to fix.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good catch.
To test:
- Created a bibliographic record, linked to an authority record (personal name). Did a search that returned the author as a facet.
- Added a [ symbol to the author name.
- Repeated the search
=> FAIL: "Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE"
- Apply the patch
- Retry the search
=> SUCCESS: No error, bracket shows correctly.
Passes koha-qa.pl too.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The function header says that DelBiblio checks to make sure there aren't
any issues on any of the items. What the code does, on the other hand,
is to check whether biblio has any items attached, and refuses to
delete biblio if it has any.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since all scripts use the '.tt' sufix for template names
there's no need for and regexp that changes from '.tmpl'
to '.tt'.
Regards
To+
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We noticed a bad encoding (diacritics replaced by <?>) in acquisition basket when updating a server to Debian Wheezy.
We found it comes from a query containing biblio.title twice.
Maybe the mysql newer version creates this side-effect.
Test plan :
- Create an order on a record containing a diacritic in title
- Look at the basket : cgi-bin/koha/acqui/basket.pl?basketno=x
=> Without the patch the record title is bad encoded (with <?>)
=> With this patch the record title is well encoded
- Check also basket CSV export
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch!
Works as expected, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Duplicated biblio.title is a (minor) bug, and should be removed.
The side-effect of it solving an encoding problem might be seen
as problematic: it hides a real problem.
The efforts on 11944 actually solve this encoding problem (11944
merged into master actually fixes this), so I'm pushing it, for
a short term solution for stable, with the hope that we will soon
have 11944 pushed.
BTW, non-diacritic but non-ASCII characters are not broken either.
If you do a kill -s HUP sipserver_pid the server process
should restart its children.
This was not happening although it was logging the commencement
of the process.
Removed traces of Exporter usage this was always incorrect
this program inherits from Net::Server 'use base' to make inheritance
clearer. Removed unnecessary begin block
made file executable so it can run
added a shebang line so OS knows to invoke perl to compile and run
the file.
I've removed the debug code dumping the config to STDOUT,
it should not have gone into the production version.
One of the first things this program does is close stdout etc and
reopens the sip sockets to them. Assuming you can print to them other
than as part of the sip dialogue is not always safe.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes how the OPACBaseURL parameter gets set in the subroutine
get_template_and_user in Auth.pm.
Currently, it's being set by the $ENV{'SERVER_NAME'} variable. In many
cases, this will probably match the URL that the user uses to access a
page. However, this causes problems with reverse proxies.
There are ways to compensate for proxy servers (such as inspecting
other variables set by the web server), but such a solution seems
a bit convoluted...especially since we already use the system preference
OPACBaseURL in many other parts of Koha.
We probably shouldn't be passing OPACBaseURL from Auth.pm at all, and
instead use the Koha TT plugin and using_https param to determine
protocol. However, that's outside the scope of this bug/patch.
This patch is just meant to fix an existing bug.
I did leave the $ENV{'SERVER_NAME'} as a full back if OPACBaseURL isn't
set, but that's it.
_TEST PLAN_
Before applying:
1) Clear your OPACBaseURL preference
2) Perform a search in the OPAC
3) Click on or hover over the orange RSS icon
4) Note that the URL used for the RSS links is either:
a) The same URL you used to access Koha (no reverse proxy)
b) The ServerName from your Koha apache conf which isn't the
same URL you used to access Koha (reverse proxy)
5) Add an OPACBaseURL that isn't the same as the actual OPAC URL
6) Note that the OPACBaseURL system preference has no effect here
After applying the patch:
7) Refresh the page
8) Note that the URL you see now is actually the OPACBaseURL system
preference that you set
9) Clear your OPACBaseURL system preference
10) Refresh your search page
11) Note that the URL has reverted back to the URL that you saw before
(either the original Koha site URL or the Koha ServerName defined
in Apache and not the URL of the proxy)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If items is created on receiving, cancel a receipt should delete them.
The code only manage the case if the order is a child of another order
(partial).
To reproduce:
1/ Set AcqCreateItem to receiving
2/ Order one or more item(s)
3/ Receive the order and verify the item is created
4/ Cancel the receipt
5/ The item is not deleted
Test plan:
1/ Apply this patch and do again previous steps. The item should not be
deleted at step 5.
2/ Set AcqCreateItem to ordering and verify the item is not deleted.
Signed-off-by: marjorie barry-vila <marjorie.barry-vila@ccsr.qc.ca>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes a reference to prog theme on getlanguages()
when ENV var HTTP_ACCEPT_LANGUAGE is checked.
Changed to use sysprefs to find theme for opac and intranet
To test:
1) Apply the patch
2) Translate for a couple of languages: de-DE, fr-FR, es-ES, etc
3) Enable those languages for OPAC on I18N prefs
4) Using Firefox, clean all history/cookies
5) Change variable intl.accept_languages (will do several times)
a) got to about:config
b) search 'lang'
c) look for the variable, double click, change to 'de-DE'
6) Go to opac page, must load in german
7) Repeat for each translated lang: clean > change val > reload opac
On each case opac must load on configured language
8) Just to test, set variable on untranslated lang, opac page
must load on first value of list of enabled languages
9) prove t/Languages.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes some potential SQL syntax errors, which can cause
fatal software errors in Koha when the environmental variable DEBUG
is on.
_TEST PLAN_
Before applying:
0) Ensure that you don't have "SetEnv DEBUG 1" in your Apache config
1) Create a new bib record
2) Click on the "Holds" tab before creating any items
3) Note the message "Cannot place hold: this record has no
items attached."
4) Add "SetEnv DEBUG 1" to your Apache config
5) Restart Apache
6) Refresh your page
7) Note the following Software Error: "DBD::mysql::st execute failed:
You have an error in your SQL syntax; check the manual that
corresponds to your MariaDB server version for the right syntax to
use near ')' at line 3 at /koha/lib/C4/Koha.pm line 835.
8) Apply the patch
9) Refresh your page
10) Note the message from Step 3
Thorough tester:
11) Remove "SetEnv DEBUG 1" from your Apache config, restart Apache,
and refresh your page. You should see the message from Step 3.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Error reproduced, patch fixes it.
Tested following test plan, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch shifts required DBIx::Schema::Loader to a newer
version to take advantage of improved smarts about foreign
key relationships.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Yohann Dufour <dufour.yohann@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Under certain circumstances misc/link_bibs_to_authorities.pl creates
multiple authority with identical heading.
Test plan:
1. Have some (2-3) biblio records with some repeated headings
Have BiblioAddsAuthorities = allow, AutoCreateAuthorities = generate
Have no authority records
2. Run misc/link_bibs_to_authorities.pl script
3. You will get multiple authority records -- one for each occurence of a
heading in biblio record.
4. Apply the patch.
5. Repeat 1-3 (remember to have "fresh" biblios, without $9, and no
authorities).
6. The problem should be fixed.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described.
This patch removes the use of smartmatch operators in the search code.
Regards
To+
Edit: this revision uses 'grep' instead of Lists::MoreUtils::any
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested search, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Record::marc2bibtex subroutine supposes hashref keys are sorted
which is wrong with perl 5.18
Note that the t/db_dependent/Record.t fails without this patch.
Test plan (for perl >= 5.18 only):
1/ prove t/db_dependent/Record.t should return green
2/ Try to export a record to bibtex and verify the order is correct
(should be author, title, year, published, etc.).
http://bugs.koha-community.org/show_bug.cgi?id=12409
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Wrong Bug number on heading.
Work as described, test pass, no koha-qa errors.
The problem is to think that a hash returns
keys in a particular order, that's not true
and no matter which perl version.
Code as was left is... misleading.
Comments talks about a hash, which is no more.
On array asignment "a => b" is equivalent to "a, b",
but the former is usually used on hashes, so a
replacement of '=>' by ',' could clarify what are we storing.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixing the comments in a follow-up patch.
Tests pass now without problems and records export ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch includes:
- removing the use of subroutines InsertInTable, UpdateInTable, SearchInTable replaced by subroutines of DBIx::Class in the subroutines AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod and GetBudgetPeriods and admin/aqbudgetperiods.pl
- removing old database fields in OrderFromSubscription.t, Bookseller.t, Budgets.t, Serials.t, Serials_2.t
- improvement of unit tests in t/db_dependent/Budgets.t
- adaptation of calls to the subroutines AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod and GetBudgetPeriods in order to match with the use of DBIx::Class
Test plan:
1) Execute the UT of all of files wich uses AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod or GetBudgetPeriods by launching the command :
prove t/Budgets/ t/Budgets.t t/db_dependent/Budgets.t t/db_dependent/Acquisition.t t/db_dependent/Acquisition/ t/db_dependent/Bookseller.t t/db_dependent/Serials.t t/db_dependent/Serials_2.t
2) The result has to be a success :
t/Budgets/CanUserModifyBudget.t ........................... ok
t/Budgets/CanUserUseBudget.t .............................. ok
t/Budgets.t ............................................... ok
t/db_dependent/Budgets.t .................................. ok
t/db_dependent/Acquisition.t .............................. ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Bookseller.t ............................... 16/72 WARNING: GetBooksellerWithLateOrders is called with a negative value at /home/yohann/koha/C4/Bookseller.pm line 135.
t/db_dependent/Bookseller.t ............................... ok
t/db_dependent/Serials.t .................................. ok
t/db_dependent/Serials_2.t ................................ ok
All tests successful.
Files=14, Tests=571, 22 wallclock secs ( 0.17 usr 0.03 sys + 20.26 cusr 1.10 csys = 21.56 CPU)
Result: PASS
3) Go on the page admin/aqbudgetperiods.pl : Koha Administration > Budgets
4) Click on the button "New Budget" and record a new budget with a "nonzero amount" and "make budget active"
5) Click on the button "New Budget" and record another budget without "make budget active"
6) Verify there is the firt budget displayed in "Active budgets" and the second budget in "Inactive budgets"
7) Edit a budget and verify the new values are updated
8) Click on the budget active name in order to go on the page admin/aqbudgets.pl
9) Click on the button "New fund for ..." and record a new fund
10) Click on the button "Edit" then "Duplicate budget ..." in order to duplicate the budget
11) Verify there are two budgets in "Active Budgets" and one in "Inactive Budgets"
12) Click on "Funds" in the menu and verify there are two identical funds and each is associated to a different budget.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Use C4::Languages::getlanguage() instead of
C4::Templates::_current_language()
Test plan:
1/ Set one of the 4 XSLT sysprefs to 'default'
2/ Go to the corresponding page
3/ Switch language and check that the right XSLT is used
4/ Set the same syspref to something with '{langcode}' in it. For
example:
"../koha-tmpl/opac-tmpl/bootstrap/{langcode}/xslt/UNIMARCslim2OPACDetail.xsl"
5/ Go back to the corresponding page
6/ Switch language and check that the right XSLT is used
7/ Change a compact.xsl for a language (for example
koha-tmpl/intranet-tmpl/prog/fr-FR/xslt/compact.xsl) to be able to see
differences
8/ Go to a biblio detail page in staff interface and click on "MARC
Preview: Show"
9/ Close the popup, switch language and click again on the same link
10/ Check that the correct XSLT is used.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No problems found, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
LDAP auto-provisioning should set default messaging preferences upon
creation of a user.
Signed-off-by: Ulrich Kleiber <ulrich.kleiber@bsz-bw.de>
Manually applied to 3.12.9 and it works beautifully in test and production.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The file C4/Maintainance.pm is not used anywhere, it can be removed, and by extension, the file t/Maintainance.t too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
A relic from the past :)
No references to this file or it's subs
No errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch restores the enhancement introduced by Bug 10318.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch add DataTables using server-side processing for the patrons
search.
It adds:
- 1 module C4/Utils/DataTables/Members.pm
- 2 services svc/members/search and svc/members/add_to_list
- 1 template members/tables/members_results.tt
- 1 new practice which is to add template for DataTables in a
subdirectory named 'tables'.
Impacted scripts: members/members-home.pl and members/members.pl
To go further: We can imagine that all patrons searches use the same
service with no big changes: 1 little template creates a JSON file and
to implement DataTables on the template page, that's all.
Amended patch: Since bug 10565 has been pushed, these patches don't
apply cleanly. I had to rewrite a part of the patron list feature.
I removed the choice to add all resultant patrons from a search. I think
this choice is useless with this patch: we are able to display the
number of patrons we want and to select all of them.
Test plan:
- Check that there is no regression on searching patrons.
- Try filters on the left of the screen.
- Try to sort each column.
- Try the "Browse by last name" links.
- Check that the "Clear" button clears yours filters.
- Try with IndependantBranches ON and OFF.
- Verify this feature does not break the patron list feature (cf bug
10565).
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, couldn't find any regressions
or problems. Some notes left on the bug.
Bug 9811: Add unit tests for C4::Utils::DT::Members
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Bug 9811: QA followup
- removes 2 tabs
- removes mysqlisms
- add sort on borrowernotes
- fix wrong capitalization
- cat => Category
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for fixing these!
Bug 9811 - multilines notes brakes JSON
In new patron search feature, the search results are fetched using Ajax and returned in JSON format.
The JSON is created by TT using koha-tmpl/intranet-tmpl/prog/en/modules/members/tables/members_results.tt.
One of the fields is the borrower notes. When this notes contains several lines, the JSON is broken.
This patch uses TT fileters to consert in notes linefeeds into HTML line break (html_line_break) and then remove linefeeds (collapse).
Test plan :
- perform a member search that does not return a borrower with a circ note
- edit one of the borrowers returned by this search
- enter serveral lines of text in "Circulation note" and save
- reperform the member search
=> circ note is well displayed on several lines
Bug 9811: use count(primary_key) instead of count(*)
Bug 9811: A limit clause should be always added.
By default, we want to retrieve 20 first results.
Bug 9811: Load the page without any data.
Displaying the first 20 patrons is not useful. With this patch, the
table is hidden and no record is retrieved by default.
On the same way, the existing side effect on redirect disappears.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
-------------
-TEST REPORT-
-------------
For the filter: Tested all the search fields, branches, search type.
Found a bug with "date of birth", followup provided.
Tested display limits and verified that AJAX-queries are
efficient (using LIMIT clause) to not stress DB needlessly.
Tested adding Patrons to a list.
A good feature, which seems to work quite well.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adding my test plan to the last patch of this bug.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the cataloguing search (cataloguing/addbook.pl), if an item has a
notforloan value > 0, the item is not listed in the Location column.
It is quite confusing, the current behavior let patrons believe that
there is not item for the biblio (or less than the real count).
Test plan:
1/ Create 2 biblio records A and B
2/ Create some items for A
3/ Create 1+ item(s) for B with a notforloan status > 0
4/ Reindex both records
5/ Launch a search on the cataloguing module and verify that the
notforloan items are not listed in the 'Location' column.
6/ Apply this patch and verify the not for loan items are listed ("Not
for loan (XXX)").
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, not for loan items now show up.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch reduces three repeated code fragments into a single
internal subroutine, which is easier to read, has comments,
and should make it easier to refactor more buildQuery code
in the future.
_TEST PLAN_
Before applying
1) Run a bunch of different searches in the staff client and OPAC
in separate tabs
2) Apply the patch
3) Run the same searches again (maybe in yet more tabs) and notice
that the results are exactly the same.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Same results, no errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If flagsrequired is set, authnotrequired should be 0.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Verify that pages in the OPAC and staff interface display correctly.
Note that there are cases where 'authnotrequired' was not passed
at all to get_template_and_user, so there may be pages that start
requiring authentication. Whether that is correct or not depends
on context.
Follow up patches are to remove all the unnessecary setting of this
value, so that the only places we set are when we do want
authnotrequired=1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The changes made by Bug 7720 ("Ambiguity in OPAC Details location")
broke the display of OPAC branch information tooltips by making changes
to the markup which the tooltip plugin needs to function.
This patch corrects the markup to enable tooltips to work again. This
patch also makes changes to Items.pm so that branch information tooltips
can be shown for both home and holding branches (which are optionally
displayed now via the changes by Bug 7720). Before this patch the
tooltip would always display the information for the holding branch
regardless of the OpacLocationBranchToDisplay setting.
This patch also changes the footer include, adding an alias for the
jQueryUI tooltip function to prevent conflict with Bootstrap's function
of the same name.
To test, you must have at least two libraries configured with "OPAC
info" for display in the OPAC.
Modify the holdings of a title so that there is at least one item which
has different holding and home branches matching your library configured
above.
View the detail page for that record under various values of the
OpacLocationBranchToDisplay system preference:
- "holding library" : The table of holdings should show a column for
only the holding library. Hovering your cursor over the library name
should display the branch information you configured for that library
in a tooltip .
- "home and holding library" : The table of holdings should show columns
for both home and holding library. Hovering your cursor over each
should show the corresponding library information tooltips.
- "home library" : The table of holdings should show a column for
only the home library. Hovering your cursor over the library name
should display the branch information you configured for that library
in a tooltip.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Works with all settings of OpacLocationBranchToDisplay.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In C4::Letters::GetLetters, the code filter was not used as a query
parameter.
Moreover, the JS code was buggy. We only need to check the letter code,
except if it is an edit and the letter code has not been changed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch is a dirty way to fix a design issue on notices.
Currently the code assumes that a letter code is unique. Which is wrong,
the primary key is module, code, branchcode.
Maybe we should add a primary key (id) for the letter table in order to
pass the id to the template and correctly manage the letter code
duplication.
Test plan:
Try to duplicate a letter code using edit, add and copy actions.
If you manage to do it, please describe how you did.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The GetLetters subroutine should return an arrayref with different
letters for a module.
Test plan:
0/ Delete your notices with module=claimacquisition, claimissues,
serial
1/ Go on the late orders page (acqui/lateorders.pl) and verify you
cannot choose a notice for claiming
2/ Create a notice with module=claimacquisition
3/ Go on the late orders page (acqui/lateorders.pl) and verify you
can choose the notice for claiming
4/ Go on the Claim serials page (serials/claims.pl) and repeat the same
thing with the a "claimissues" notice
5/ Create a new subscription (serials/subscription-add.pl) and verify
you cannot choose a notification for patrons.
6/ Create a notice with module "serial" and verify you can.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Additional tests done:
- copy notice ODUE, on saving you are now prompted to choose
a new CODE for the notice
- edit new notice, try to set code back to ODUE. You are
prompted that the code is already in use.
This will prevent people from accidentally overwriting a letter
with the same letter code.
1) Test record has 1 single item, checked out to patron X
2) Place 3 holds for patrons A, B and C, all title level hold this time
A, B, C, item branches and staff branch are the same.
3) Return item, confirm hold
4) Confirm item is now waiting for patron A
Priorities are: A = Waiting, B = 1, C = 2
5) Open patron account of user B, checkout book
Koha asks: Item X has been waiting for patron A... Revert
waiting status
Confirm.
6) Check priorities:
Hold list shows: A = 1, C = 1
Database says: A = 1, C = 3
7) Apply this patch
8) Repeat steps 1-6
9) Note the priorities are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan correctly predicts the error and the correction made by the
patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The OverDrive integration needs to connect to an authentication server
over HTTPS, and many systems do not install the necessary module
(LWP::Protocol::https) by default.
Test plan (for patch):
1) Run koha_perl_deps.pl -a, verify that LWP::Protocol::https appears in
listing.
Test plan (to verify that LWP::Protocol::https is necessary, needs OverDrive access):
1) Remove LWP::Protocol::https (liblwp-protocol-https-perl under Debian).
2) Run an OverDrive search on the OPAC, it should fail.
3) Reinstall LWP::Protocol::https.
4) Rerun OverDrive search, it should now succeed.
Note: older versions of Debian do not need to install LWP::Protocol::https separately;
the Debian scripts have been updated to reflect this divide.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12041 made xt/author/podcorrectness.t consider files in the 'Koha' namespace.
Some of them where failing. This patch fixes some of those POD problems.
Best regards
To+
Test:
1) run prove xt/author/podcorrectness.t
it fails
2) apply patch
3) run again, now it's ok
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Before patch test fails. After it, it pass
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements 2 suggestions on comment #3
- Prevents creation of a new user with same userid
of database user
- When checking password, if userid matches database user,
only check against pass on config file
To test:
1. Create a new user with same login as database user
any password different from real db user
2. Check that you can login on staff using this user/pass
and you are superlibrarian
3. Apply the patch
4. Login again using new pass, it must fail
5. Login again using db pass, you are now superuser,
but system does not warn you :( No problem, that's
for having one borrower with that login
6. Delete user with same login as db user
7. Try to create one again as in 1, system must return
an error of duplicate login!
8. Check for no regressions on user/pass authentication
Resubmited, has an error
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
This works nicely and as described.
Also editing the former 'superuser' will force you to
change the userid in order to save any other change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This makes Koha::Cache behave better by default. It will use memcached
if available to do shared caching, if that's not available it will fall
back to in-memory caching. It also allows for a singleton accessor to
allow a single cache to be shared within a process.
* Added tests to confirm UTF8-cleanness.
* Added minor fixups to stop warnings.
Test plan:
* The t/Cache.t file runs successfully with and without the
MEMCACHED_SERVERS envvar set (and memcached running in the
environment.)
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the use of the 'when' smartmatch operator from
Serials.pm
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TransformKohaToMarc() function in C4/Biblio.pm iterates through it's
argument - which is a hashref - using 'each'. Perl is not guaranteed
to return hash keys in any particular order (not to mention that
in more recent perl versions, explicit hash key order randomization
is to be expected).
As a consequence:
1) For biblio records added via acquisition (order from a new/empty
record, order from a suggestion), freshly created MARC biblio records
doesn't always have 260 $b and 260 $c stored in the proper order
2) Holdings data exported for zebra indexing as 952 fields may have
subfields generated in more-or-less random order. While it probably (?)
does not affect zebra indexing/searching in any significant way,
end result is prone to be somehow ugly (which can be a potential
issue e.g. for people running Z39.50 server) and is not guaranteed
to be consistent; different records - or even different items in the
same record, can have 952 subfields generated in indiscriminate order.
This patch fixes abovementioned issues via introducting explicit
sorting (by subfiled code/letter) for subfield pairs before they
are added to the MARC record.
To test:
1/ Try to confirm and reproduce both issues (use perl 5.18.1 if possible
for more randomly ordered results).
2/ Apply patch.
3/ Redo the tests; ensure that both issues are now fixed and that there
are no apparent regressions of any kind (especially regarding to 952 fields
generated for zebra [re]indexing).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Modifies showmarc and opac-showmarc to use new XSLT handler.
Removes cardview.pl as obsolete script.
Modifies C4/Record.pm and a typo in the test Record.t.
Test plan:
[1] catalogue/showmarc: Go to Cataloging. Search. Click Card.
[2] opac-showmarc: Go to opac detail, MARC view.
Open URL for plain view in new tab.
Change URL: Change viewas=html to viewas=card
[3] Verify that there are no references in the codebase to cardview.pl
[4] C4/Record.pm: Run the Record.t test in db_dependent.
This test uses marc2modsxml, triggering the change.
Additional: export to MODS from opac-detail.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Views Ok. Test pass. No more cardview. No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Incorporate the new object into C4/XSLT module.
The handler object needed one adjustment to allow for passing URLs.
Removed the GetURI function; it is no longer needed.
Added some documentation lines.
Moved a file-level lexical upwards in the code for visibility.
Removed some tabs (on two lines).
Note: The handler could perhaps be moved up to the Context module, or
be saved in a global ('our') variable. But I would rather not do that
now, making testing not too complex at this moment.
Test plan:
Enable XSLT preferences for opac and intranet.
Check result and detail pages.
Check individual list display (virtual shelves).
Force an XSLT error by editing one of your xsl files. Check the
corresponding display.
Put an URL in one the XSLT prefs (could just be to your own server).
Check the display.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Running XSLTParse4Display in a loop showed no significant performance
change.
One pass cost me around 0.012 sec (except for the first pass).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Results, detail, url and list view Ok
No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to streamline the cataloging process my
automatically updating notforloan values on checkin. For example, an
item is set to notforloan of -1 ( ordered ). The item, is received,
processed, and checked in for the first time before being shelved.
The checkin automatically changes the nfl value from -1 to 0. The
same workflow could be used for damaged items as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateNotForLoanStatusOnCheckin
to the following:
-1: 0
0: 1
4) Create an item, set its notforloan value to -1
5) Check in the item, note its not for loan value is now 0
6) Check in the item again, note its not for loan value is now 1
7) Check in the item again, note its not for loan value reamins 1
Signed-off-by: Havilah Lyon <havilah@aflibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The QA follow-up which adds GetURL to the TT branches
plugin means that GetItemsInfo no longer needs to be changed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Fix capitalization
[2] Move logic for getting the home library name URL to the
Branches TT plugin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new issuing rule: maxsuspensiondays.
A new column "Max. suspension duration (day)" appears in the main table
of the issuing rules.
If this value is filled, on returning an item, a patron won't be
suspended longer than this cap.
Test plan:
1/ Set "suspension in days" to 2.
2/ Check an item out to a patron and specify a due date to today - 10
days.
3/ Check the item in and verify the patron is suspended until today + 10
* 2 days.
4/ Remove the suspension.
5/ Set "Max. suspension duration" to 10.
6/ Check an item out to a patron and specify a due date to today - 10
days.
7/ Check the item in and verify the patron is suspended until today + 10
days.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is currently no way to set the privacy setting for newly created
patrons. This patch adds a new field "default privacy" to the patron
categories such that each patron category may have a different default
privacy setting.
Test Plan:
1) Apply this patch
2) Edit a patron category, change the default privacy to "forever"
3) Create a new patron of that category
4) Log into the catalog as that patron, verify the privacy setting
is set to "forever"
5) Repeat steps 2-4 with the settings "never" and "default"
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 1] - can't set patron privacy by default
* Adds default privacy column to summary table
* Adds default privacy to delete category summary
* Adds "AFTER categorycode" to the database update
* Whitespace cleanup and formatting for affected code blocks
* Switch basic DBI queries to DBIx::Class to simplify code
* Adds reference to misc/cronjobs/batch_anonymise.pl to description
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 2] - can't set patron privacy by default
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254: QA FIX: remove trailing whitespaces
This patch removes trailing whitespaces/tab and fix the fields order in
the updatedb entry (according to the kohastructure.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This bug adds the "vendor note" for each order in the PDF for
basketgroups. The note is displayed only if it exists, just under the
bibliographic information.
I added a separation line "--------" between bibliographic information
and the note, so that it could be visible at 1st glance.
It also replaces the internal note with the vendor in the CSV for basket
and basketgroup. It is more logical and useful for libraries to export
the note made for vendor, as those files are destined to be sent to the
vendor.
Test plan :
- fill a basket with some orders, some with internal notes, some with
vendor notes
- export the basket in CSV : only the vendor notes should be present
- put the basket in a basketgroup
- export the basketgroup in CSV : only the vendor notes should be
present
- Select "English-2 pages" template for basketgroups in Sysprefs
- export the basket in PDF : the vendor notes should be present under
the bibliographic information
- Select "English-3 pages" template for basketgroups in Sysprefs
- export the basket in PDF : the vendor notes should be present under
the bibliographic information
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This piece of TT code:
[% SWITCH lang %]
[% CASE ['en', 'eng'] %]English
[% CASE ['fr', 'fre'] %]French
[% CASE ['it', 'ita'] %]Italian
...
[% CASE %][% lang %]
[% END %]
is parsed by the TTparser.pm wrong. In the po-files, it shows up as:
...
All the "CASE [ ... ]" codes are shown as "ERROR".
This happens if any TT statement contains a ']' in it - the TTParser
looks for anything that starts with [% and ends with ].
This patch fixes it so that it expects TT directives to end
with '%]'.
To test:
1) cd misc/translator/
2) perl translate update xx-YY
3) for x in po/xx-YY-*.po; do cp "$x" "${x/.po/.po.bak}"; done
4) apply patch
5) perl translate update xx-YY
6) for x in po/xx-YY-*.po; do diff -Nurd "$x" "${x/.po/.po.bak}"; done
the only changed lines should be those that apply to msgid's with
ERROR-parameters.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) View some records with authorities
4) Note your previously set authority separator should still be in use
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
InstallAuth was in the installer directory, which meant that Plack was
unable to find it, and so running the webinstaller would fail. This
moves it into C4,
Test plan:
* Make sure the web installer runs under plack
* Make sure the web installer runs under non-plack
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A really weird (and old) code process the calculation for the spent and
ordered sublevel funds.
It only takes into account the direct children.
So if you have:
fund1 (spent=100) parent of fund11 (spent=10) parent of fund111 (spent=1),
you get:
fund | base-level | total spent
fund1 | 100 | 110
fund11 | 10 | 11
fund111 | 1 | 1
which is wrong, it should be
fund | base-level | total spent
fund1 | 100 | 111
fund11 | 10 | 11
fund111 | 1 | 1
Test plan:
- Create 1 budget and 3 funds with the same structure as above.
- Create some orders and receive them (not all).
- Go on the fund list view and verify the values are correct.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the test so that if an "ISBN" is not
defined (because the source string did not specify a valid
ISBN), it doesn't result in a warning once the warnings
stricture is enabled in C4::Koha.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem where search errors like this in the logs when
running a stage import with the AggressiveMatchOnISBN syspref turned on:
search failed (isbn,phr=978-0-7517-9745-9 or isbn,phr=0-7517-9745-6 or
isbn,phr=978-0-7517-9745-9 or isbn,phr=0751797456 or
isbn,phr=9780751797459 or isbn,phr=978-0-7517-9759-6 or
isbn,phr=0-7517-9759-6 or isbn,phr=978-0-7517-9759-6 or
isbn,phr=0751797596 or isbn,phr=9780751797596 or isbn,phr= or
isbn,phr= or isbn,phr= or isbn,phr= or isbn,phr=) CCL parsing
error (10014) Search word expected ZOOM at
/usr/share/koha/lib/C4/Matcher.pm line 688.
This is most easily seen when running the script from command line
/misc/stage_file.pl.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Restore elementSetName to marcxml for DOM indexing in Zconn (Context.pm).
This prevents the need of rebuilding the index after restarting Zebra
server.
Removes the now incorrect reference to marcxml as 'superfluous' in four
dom config files.
Test plan:
[1] Do not yet apply this patch.
[2] Rebuild zebra index with the zebra config of commit
036f2a50e1.
[3] (Go back to master.) Restart your zebra server (no config change).
You will have results without details.
Apply this patch: you see details.
Reset to master: no details again.
[4] Install new zebra config from master.
Search again: you still see no details.
Restart zebra server. Search: you see details.
Apply this patch. Search: still details.
Restart zebra server. Search: still details.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested in a non-package environment (manual dev install).
The package environment should work now too (results in step 4c might differ).
Progress on bug 12012 would be appropriate to sync all changes.
Tested the response of the SRU server too.
Signed-off-by: Marc Veron <veron@veron.ch>
I tested starting on a VM with Koha 3.15.00.019 installed.
Did git pull -> Koha 3.15.00.051
Result: No details in search results.
Applied patch.
Result: Search results display fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes some sources of warning messages thrown by
C4::Languages, particular getTranslatedLanguages() when running
Koha's web installer.
TEST PLAN
---------
1) Apply first patch
2) prove -v t/db_dependent/Languages.t
-- There will be uninitialized string messages, etc.
3) Apply second patch (this one)
4) prove -v t/db_dependent/Languages.t
-- Only one carp message will remain.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, no warnings, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some types of invalid ISBNs, when run through C4::Koha::NormalizeISBN
can produce ISBN objects that contain invalid ISBNs. This can be
reproduced with an ISBN that has an invalid prefix, group code or
publisher code. An example ISBN would be "0788893777 (2 DVD 45th ed)".
When attempting to look up a record with such an ISBN, you will get an
error along the lines of: Can't call method "as_string" on an undefined
value
Instead of checking for the BAD_ISBN state, we should be checking for
the GOOD_ISBN state via the method is_valid.
Test Plan:
1) Edit a record, add the following ISBN to your record:
0788893777 (2 DVD 45th ed)
2) When Koha redirects to the record, you should see the error message
described
3) Apply this patch
4) Reload the page, you should now see your record
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This sets the version numbers of the modules added by bug 12234 to more
sensible values (in this case, the versions included in Debian Squeeze.)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A run of update-control, adding bash-completion as a build-time
dependency, allowing update-control to ignore anything that doesn't
have a package but isn't marked as "required" by Koha, added
dependencies that we don't use but is needed by something we do use.
All fairly mundane.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When a user runs a report containing an SQL error, no
error is shown to the user. This patch fixes this.
To test:
1) Run a report with known good SQL.
2) No error is shown.
3) Run a report with bad SQL (eg. a typo in field name)
4) No error is shown.
5) Apply patch
6) Repeat 1-4. For the bad SQL report, the database error
should be shown.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1/ Create a new subscription, with manual history enabled
2/ Edit history by clicking on "Edit history" under Planning tab (add
some text)
3/ Receive some serials, see that received and missing issues are not
updated in Summary tab
4/ Edit subscription and disable manual history
5/ Receive some serials, see that received and missing issues are
updated, but your notes have been kept.
6/ Edit serials and change status from/to missing or not available.
Check that missing issues are updated correctly.
7/ Edit serials and change status from/to arrived. Check that received
issues are updated correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue caught by the test case where StrWidth()
based its calculations on the internal Adobe font rather than a
TrueType font in use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
