TEST PLAN
---------
1) Apply all patches before this.
2) run koha qa test tools
-- whitespace failures
3) Apply this patch
4) run koha qa test tools
-- no whitespace failures.
NOTE: More tabs were fixed than required, to also clean up a little indenting.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Koha-qa tools now happy
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
This works with next patch
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At the opac, the renew checkbox should not be displayed if it's an
on-site checkout (same on the intranet).
On the way, this patch adds a specific message to the intranet if the
librarian try to renew an on-site checkout.
Indeed before this patch a renew was allowed if the barcode was scanned.
Test plan:
1/ Create an on-site checkout for a patron
2/ Confirm that the checkbox 'renew' is not displayed on the checkout
list tables
3/ At the OPAC, the renew should not be allowed (no checkbox)
4/ Try to check the item out to the same patron, confirm that you get a
specifig message to inform you the renew is not allowed for on-site
checkouts.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed 'issue' to 'item' in the error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run the test: t/db_dependent/Reserves/GetReserveFee.t
Signed-off-by: Joonas Kylmala <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Koha::Item->effective_itemtype should fallback to biblio-level itemtype
even if item-level item types are set, in the case the item has no itemtype
set (bad migration, bad old code).
To test:
- Run
$ prove t/db_dependent/Items.t
=> FAIL: Koha::Item->effective_itemtype doesn't work properly
Edit: Added a test for a warning when falling back as per QA request
and because it made a lot of sense :-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The change in MoveReserve from the previous patch begs for a test.
Here we add some to Reserves.t.
In all six tests we place a hold, move it and check the reserves again.
Depending on the status of ConfirmFutureHolds, and the reservedate the
hold should be moved or not.
Test plan:
Run the unit test.
Bonus: If you run Reserves.t by applying this patch but without the first
patch that changed MoveReserve, tests 60 and 61 should fail:
not ok 60 - MoveReserve filled future hold now
not ok 61 - MoveReserve filled future waiting hold now
This may further illustrate the need of the first patch.
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
- prove t/db_dependent/Letters.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The unit test is db dependent (as Jonathan correctly remarked),
since the sub checks a preference.
Test plan:
Run t/db_dependent/Biblio/TransformHtmlToXml.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The reserves.constrainttype does not exist anymore, it has been removed
by bug 9809.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add a script sitemap.pl to process all biblio records from a Koha
instance and generate Sitemap files complying with this protocol as
described on http://sitemaps.org. The goal of this script is to be able
to provide to search engines direct access to biblio records. It avoid
leaving search engine browsing Koha OPAC and so generating a lot of
traffic, and workload, for a bad result.
Thanks Magnus for testing, and helping to improve the script design.
[2015.04.16] Switch from Moose to Moo.
[2015.08.20] Add complete (more) UT.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
All options to the script work as expected and the output looks
good. Nice enhancement!
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I signed-of my own patch after fixing various QA errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: replace tabs with spaces.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some additional unit tests of bug 14464 still included a constraint
in the AddReserve calls.
Test plan:
Run Reserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The current test for still-active contracts fails because it was written
with fixed dates, which already passed :-D
This patch calculates the current date, and uses it to generate a future
one, so the tests serve their purpose no matter what the current date is.
To test:
- Run:
$ prove t/db_dependent/Contract.t
=> FAIL: activeonly compares contractenddate with now(), and fails
because a fixed 2015-07-31 is writteng on the test data
- Apply the patch
- Run:
$ prove t/db_dependent/Contract.t
=> SUCCESS: the sample data has been calculated using the current date
and the tests pass.
- Sign off :-D
Edit: added missing use DateTime::Duration,
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This followup adds several tests to t/db_dependent/Reserves.t.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This is not introduced by the previous patches of this patchset.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch introduces tests for makepayment and makepartialpayment to check
they are correctly logging to the statistics table.
To test:
- Run
$ prove t/db_dependent/Accounts.t
=> FAIL: tests fail because statistics are not correctly logged.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Specify the reference, we should receive Koha::Object.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
We should show the date a waiting hold is set to expire for each hold in
the list of waiting holds in circulation.pl
Test Plan:
1) Apply this patch
2) Find a waiting hold for a patron, browser to circulation.pl
for that patron
3) Set system preference ReservesMaxPickUpDelay to 5
4) Refresh circulation.pl, note the waiting holds now display a
"waiting until" part with the waiting date plus 5 days
5) Set system preference ReservesMaxPickUpDelay to 0 ( or empty
string )
6) Refresh circulation.pl, note the waiting hols no longer have a
"waiting until" line.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan successfully. Automated tests successful.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Bug 13030 [QA Followup] - Fix unit tests
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch does:
[1] Some trivial template changes. Modified some comments (POD lines).
[2] Converted plugin to new style.
[3] Table updates: renames id to hashvalue, adds a autoincrement id,
adds filesize, timestamp, owner and category.
RM: This db rev is in a separate sql file in atomicupdate.
[4] Code references to computed hash renamed to hashvalue instead of id.
[5] Removed some code pertaining to exposing upload dir structure. The user
now may choose a category; the uploader takes care of storage.
The list of upload categories is now taken from authorised values; this
might become a separate table in the future. (If there are none,
the upload process creates one default fallback.)
We can add e.g. permissions later, subdir structure, etc. (So dir will
not necessarily be category anymore.)
Test plan:
[1] Run the db revision.
[2] Upload new file. Check the record in the table. Delete it again; check.
[3] Run t/db../UploadedFiles.t.
[4] Run t/db../FrameworkPlugins.t -incl cataloguing/value_builder/upload.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Adds httpheaders sub to UploadedFiles; this will be extended on a new
report. (Idea is to add configurable headers for file extensions.)
Trivial unit test added.
Small cosmetic changes to opac-retrieve-file.
Test plan:
Run test UploadedFiles.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
I hate noisy tests, so I cleaned them up.
MEGA TEST PLAN
--------------
git checkout -b bug_6874 origin/master
git bz apply 6874
-- yes, it should all apply smoothly.
I intentionally restored an old backup from a couple months ago to force the upgrade.
staff client:
-- upgrade
-- login
Koha administration
MARC Bibliographic framework
MARC structure (for BKS)
Search for 856
Subfields
Edit (for u)
Other options
Plugin: upload.pl
Save changes
Search the catalog tab
{choose a word, any word. I used fancy, because I knew we had a cookbook}
click first link
Edit
Edit record
8 (that's the tab name)
click the name for 856
scroll down to u and click the plugin icon
-- Correctly got a configuration error message.
At a command prompt:
vi ~/koha-dev/etc/koha-conf.xml
/enable_plug
-- add in:
<upload_path>{appropriate path. I used /home/mtompset/uploads}</upload_path>
:wq
mkdir {appropriate path used}
-- I even added some subdirectories
sudo chown -R -v www-data.www-data {appropriate path used}
Back in staff client:
click the plugin icon again
-- this time an upload screen pops up
click the 'Upload file' button
-- message about no file or destination
browse for a file, select one
click the 'Upload file' button
-- message about no destination
click the 'Cancel' button
click the plugin icon
click a destination radio button
click the 'Upload file' button
-- message about no file
browse for a file, select one
click the 'Upload file' button
-- message about success
click the 'close' button.
-- the text box has been filled in with a nice URL
click the plugin icon
click cancel
click the plugin icon
click delete
-- the test box should be blanked, and a success message given
click Close
-- reupload a file properly
click the plugin icon
click delete
click upload file
browse for a file, select a destination, click upload file
click close on success message
click 'Clone this subfield'
click the second plugin icon
click delete
click close
click the first plugin icon
-- Nice error message about a URL which points to nothing.
click cancel
In the second 856$u type in a URL (eg. www.google.com)
click the second plugin icon
-- this jumps immediately to the upload screen, but does not give an error message, because the URL does not have opac-retrieve-file in it.
click save (we need to save the bibliographic record)
In OPAC:
search for the same word (I used fancy)
find the entry you just updated with links
click the two links. The dangling entry should give you a 500 error, and the other link should work just fine.
get back to the detail page
In staff client:
edit
edit record
8
change the 856$u to a valid file in the first link.
save
In OPAC:
refresh the detail page, and click the first link again
this time it should get downloaded nicely.
From a command line:
prove -v t/db_dependent/UploadedFiles.t
perldoc C4::Biblio
perldoc C4::UploadedFiles
One more round of tests tomorrow, and this should be ready. :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on top of 5010
Followed mostly mega test plan, seems to work :)
Can upload, delete, modify, etc
Test runs Ok
No koha-qa errors
I view this as valuable addition, dangling since 2011!
As with 5010, I consider this can be pushed (for 3.22)
and we can fix anything wrong later.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Two problems were discovered while doing a fresh install
of Koha. These problems in the kohastructure.sql file are
addressed with this patch.
Clicking the plug-in icon should cause the popup window
to refocus. This adds the refocus code to the upload.pl file.
The path to the jquery.js script was wrong in the
upload_delete_file.tt file. Changed [% themelang %] to
[% interface %].
If a user clones 856$u after uploading a file, deletes the file,
and then clicks the plugin icon on the first 856$u, this will go
immediately to the upload screen with an informative error
message.
After some validation was added, it was extended to include
other cases. This serves to patch 6874 to a state where sign
off should be possible.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
* Renames uploadPath to upload_path to follow the standard naming
conventions in koha-conf which use underscores rather than camel case
* Remove reference to intranet-tmpl and replace with [% interface %]
required to pass qa
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Add unit tests for C4::UploadedFiles and move a variable
declaration at subroutine level instead of file level.
Add dependency to Test::CGI::Multipart
Still works, and the newly-provided unit tests have good test
coverage:
C4/UploadedFiles.pm 90.7 65.0 66.7 100.0 100.0 0.2 86.4
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This is the original patch for bug 12892 and replaces the older style of
fetching the holds data with Koha Objects. It will be used as a
foundation for future features.
Test Plan:
1) Apply this patch
2) Create a hold, set to waiting
3) Browse to circulation.pl for that patron
4) Note you see the list of waiting holds
5) Switch your logged in branch to a different branch
6) Note the "Waiting at" line is no longer emphasized.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the core code of two selfreg cron jobs into the Members
module. The new routines are called from cleanup_database with two new
parameters. The old cron jobs are now wrappers to cleanup_database.
As a bonus, we can add a unit test now.
In time, we can obsolete the selfreg cron jobs. For now, the code is in one
place and behavior does not change.
A next step (as described on the Bugzilla report) would be: remove the Delay
pref for self regs.
Test plan:
Run the unit test t/db_dependent/Members.t.
Test the two new parameters of cleanup_database.pl.
Verify if delete_expired_opac_registrations.pl still works.
Same for delete_unverified_opac_registrations.pl.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
. Fixed minor merge confict on UT & cleanup_database.pl
. UT ok
. The two deprecated scripts still work as before, with a warning
message.
. cleanup_database.pl do the deletion job, calling new C4::Members
function rather that doing it directly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
add correct frameworkcode to _koha_marc_update_bib_ids parameters
add test, prove with : prove t/db_dependent/Biblio.t
TEST PLAN
---------
1) git checkout -b bug_10961 origin/master
2) git bz apply 10961
3) git checkout origin/master -- C4/Biblio.pm
4) prove t/db_dependent/Biblio.t
-- was expecting failure, got failure.
5) git reset --hard origin/master
6) git bz apply 10961
7) prove t/db_dependent/Biblio.t
-- success as expected.
8) Read over code.
-- Noted it also grabs the framework code for the biblio, rather than uses default.
And it also corrects an indentation issue.
Test case looks like it attempts to cover the biblionumber!=biblioitemnumber case
by adding 1.
9) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces a regression test for the situation in which
an itemnumber on a record matches the authid of an authority record
and the current implementation of the EmbedSeeFromHeadings filter
wrongly includes new holding fields with authority data...
To test:
- Apply the patch
- Run:
$ prove t/db_dependent/RecordProcessor_EmbedSeeFromHeadings.t
=> FAIL: The test 'Holdings fields not processed to introduce See-from heading'
fails.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
---------
1) $ prove t/db_dependent/Auth_with_cas.t
-- CGI security warning
2) apply patch
3) $ prove t/db_dependent/Auth_with_cas.t
-- no noise.
4) koha qa test tools
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Not able to reproduce the error on my setup, but the code
is a clear improvement over the previous version.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The second patch of this report made some changes to CalcDateDue.
We are adding some unit tests here.
See the commments on the third patch too.
Test plan:
Run t/db_dependent/Circulation_dateexpiry.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Set the number of tests for the second subtest (was
commented) and perltidy the second block.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Moved the test on its own. Nicer than adding TestBuilder in the final part
of the test. No warnings/errors from TestBuilder, no dependency..
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has requested anonymity on returning items and the system is
not correctly configured (AnonymousPatron no set or set to an inexistent
patron), the application should take it into account and not fail
quietly.
This patch is quite radical: the script will die loudly if the privacy
is not respected.
To be care of the bad "Software error", some checks are done in the
updatedatabase to be sure the admin will be warned is something is wrong
in the configuration.
Test plan:
1/ Test the updatedatabase entry:
a. Turn on OPACPrivacy and set AnonymousPatron to an existing patron
=> You will get a warning
b. Turn on OPACPrivacy and set AnonymousPatron to 0 or ''
=> You will get a warning
c. Turn on OPACPrivacy and set the privacy to 2 (Never) for at least 1 patron
Turn off OPACPrivacy
=> You will get a warning
d. In all other cases you will get no error
2/ Test the interface
a. Turn on OPACPrivacy and set the privacy to 2 (Never) for a patron
b. Now you can turn off OPACPrivacy or keep it on, behavior should be
the same
c. check an item out the patron
d. Check the item in using the check out table
=> fail
e. Check the item in using the Check in tab
=> fail (not gracefully).
Note that the software error could appear on other pages too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Updatedatabase works as described
On staff, if don't have correct settings for anonymity it's
impossible to check-in (with OPACPrivacy on)
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When a suggestion is created and linked to a fund, a mail will be
generated, using a cronjob, to notify the budget owner.
A suggestion is considered as "can be treated" if its status is "ASKED".
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds 2 tests to t/db_dependent/Acquisition/TransferOrder.t
in order to confirm the order's status is properly marked.
TEST PLAN
---------
1) Log into staff client
2) Acquisitions
3) Create a basket for two differing vendors.
4) Place an order in one of the baskets.
5) Transfer the order from one vendor's basket to the others.
6) Apply this patch (1) only
7) prove -v t/db_dependent/Acquisition/TransferOrder.t
-- should fail one test: not marked as 'cancelled'.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch removes HomeOrHoldingBranchReturn syspref and makes circ/returns.pl respect branch
circulation rules from C4::Circulation::GetBranchItemRule. Also transfer slip notice should reflect this.
Default should always be to return item to home branch.
Test plan:
- make sure syspref 'AutomaticItemReturn' is set to 'false'
- unset 'Default checkout, hold and return policy' or set 'Return policy' to 'Item returns home'
- checkout an item and do a checkin from different branch than items homebranch
- verify that you're prompted with a transfer message to item's home branch and that print slip matches
- set 'Return policy' to 'Item returns to issuing library'
- do a checkout and a checkin from branch different than item's home branch
- verify that you're not prompted with a transfer message and that holding library is your current branch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Follow-up:
- Added 3 tests in t/db_dependent/Circulation_Branches.t to test AddReturn
policies
- Removed HomeOrHoldingBranchReturn from sysprefs.sql
- Added notice on removing syspref in updatedatabase
QA edits:
- removed trailing whitespace in tests
- moved branchname lookup from returns.pl to template
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Adds missing test for getletter() when called from overdue_notices.pl
Test plan
=========
1/ apply this patch
2/ run prove -v t/db_dependent/Letters.t
all tests should pass, especially test #40 which tests call from
overdue_notices.pl
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Letters::getletter() is called in tools/letter.pl by the function
delete_confirm() to display the selected notice for deletion. Due to
current implementation of getletter(), a notice that does not use
the 'email' template (but uses any/all of the other templates - sms,
print or phone) can't be deleted from the staff client.
This patch adds deletion capability for notices that do not use email
template, but uses any/all of the other templates i.e. sms, print or
phone. This also adds 2 tests to t/db_dependent/Letters.t for testing
both conditions - a) when message_transport_type is specified b) when
it is not.
Test plan
=========
1/ Go to Tools -> Notices & Slips. Add a new notice only for print,
leave 'Library' and 'Koha module' options as default selections.
Enter 'KOHA_14206' and 'Koha Test 14206' against Code and Name
respectively, and 'Test' and 'Test Message' for subject and body.
Leave the Email, Phone and SMS tabs blank. Save the notice.
2/ On the notices listing page the new notice will be listed. Try to
delete it. It will load the 'Delete notice' dialog form, but the
table will not show any data under <th>s - 'Library', 'Module',
'Code' or 'Name'.
3/ Click the "Yes, delete" button. The page will be submitted and the
Notices listing reloaded. The print-only KOHA_14206 notice should
continue to exist. This is *wrong*.
4/ Apply this patch
5/ Reload the listings page and click on the 'Delete' link for Notice
KOHA_14206. This time, it should show the data under 'Module',
'Code' or 'Name' at least.
6/ Click on 'Yes, delete'. The page should submit and the listing page
reload. This time KOHA_14206 will be gone.
7/ Run prove -v t/db_dependent/Letters.t
All tests should PASS without any error.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Letters.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Letters.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Budgets.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Budgets.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
----------
1) git reset --hard origin/master
2) prove t/db_dependent/Bookseller.t
-- horrible failure about transaction
3) apply this patch
4) prove t/db_dependent/Bookseller.t
-- no issues
5) koha qa test tools.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The introduction of system preference objects in bug 13967 has caused
the current testing regimen to fail do to the mixing of DBI mocking and
DBIx::Class.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Context.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
System preferences should have a package based on Koha::Object to remove
the need for direct manipulation via SQL.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/sysprefs.t
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is a case of works by accident. This patch corrects the
set_userenv call.
TEST PLAN
---------
1) prove t/db_dependent/Borrower_Discharge.t
-- works
2) git grep :set_userenv
-- only this one file.
3) Confirm the the C4/Context.pm has a set_userenv
which shifts the first parameter, as intended for
a -> call and not a :: call.
4) apply patch
5) prove t/db_dependent/Borrower_Discharge.t
-- still works
6) git grep :set_userenv
-- nothing now.
7) run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's suppose to avoid foreign key trouble
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No error
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This deals with my concerns raised in comment #2.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Testing C4::Creators::Lib at 100%
Deleting get_column_names subroutine (never used)
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/Creators/Lib.t
-- All 644 tests should run successfully without
any error or warning
TEST PLAN OPTIONAL
------------------
Check with bug 13899 to see the coverage of this module.
Coverage BEFORE this patch :
Statement : 11,6%
Branch : 0,0%
Condition : N/A
Subroutine : 36,0%
Coverage AFTER this patch :
Statement : 100,0%
Branch : 100,0%
Condition : N/A
Subroutine : 100,0%
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
t::lib::TestBuilder::_gen_text does not use correctly the regex and the
max parameter to generate the random string (String::Random).
This can cause future tests to fail.
http://bugs.koha-community.org/show_bug.cgi?id=14195
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Script tested, problem occurs, patch fixes it.
Bad number on commit subject
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the unit tests related to guided reports.
It is needed now that there are more options available.
It also fixes a wrong 'savedsql' key (should be 'sql') that
caused the tests to print warnings.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This way ILS-DI HoldItem and HoldTitle services also benefit from this
check
Test plan:
1/ Define some default holds policies by item type in
/admin/smart-rules.pl
2/ Use ILS-DI HoldItem service and check that those rules are respected
3/ Check that staff and opac hold behaviour is unchanged regarding
these rules.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. No regressions found,
improves the ILS-DI HoldItem response.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This last patch catches all the warning messages in tests.
TEST PLAN
---------
1) Apply first two patches
2) $ prove t/db_dependent/Barcodes.t
-- still noisy warnings.
3) apply last patch
4) $ prove t/db_dependent/Barcodes.t
-- All noisy warnings are caught.
5) koha qa test tools.
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
---------
1) Apply first two patches
2) $ prove t/db_dependent/Barcodes.t
-- Diags have been removed, just noisy warnings left.
3) $ git diff -w origin/master
-- only excess print's and diag's removed.
4) koha qa test tools
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Indentation was horrible. Fixed to meet 4 space standard.
TEST PLAN
---------
1) Notice tabs in t/db_dependent/Barcodes.t
2) $ prove t/db_dependent/Barcodes.t
3) apply patch
4) $ prove t/db_dependent/Barcodes.t
-- same output as before.
5) $ git diff -w origin/master
-- code is identical except for indentations.
6) koha qa test tools
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At this point, no occurrence of SQL::Helper should exist.
Let's remove the package and tests.
Test plan:
git grep SQLHelper
and
git grep InTable
Should not return anything in the Koha code.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the only places where SQLHelper is still called.
The C4::Members::Search is not used anymore, but ModMember and
AddMember.
This patch replaced the calls to SQLHelper to use DBIX::Class.
TODO: Move them to Koha::Borrower.
Test plan:
1/ Make sure the patron search still works (no changes expected since the
code was not in used).
2/ Add a patron with all fields filled
3/ Add another patron with some fields filled
4/ Update them with other values
5/ Delete them
You should not get any errors.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch updaes the batch_id variable after items are added to test batch
To test:
1. prove t/db_dependent/Labels/t_Batch.t and see two tests fail
2. apply patch
3. prove again, tests pass!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: The $batch->add_item() call to C4::Creators::Batch::add_item
triggers the change of the batch_id so this line is necessary!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes two files, serials-recieve.pl and serial-recieve.tt
serials-recieve.pl is not called anyware
(it's recieve!)
Also removes the sub removeMissingIssue called only from serials-recieve.pl
git grep serials-recieve.pl .
C4/Serials.pm:called when a missing issue is found from the serials-recieve.pl file
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f" action="serials-recieve.pl" onsubmit="return barcode_check()">
koha-tmpl/intranet-tmpl/prog/en/modules/serials/serials-recieve.tt: <form method="post" name="f2" action="serials-recieve.pl">
serials/serials-recieve.pl:serials-recieve.pl
Just a POD entry and self reference.
After removing of files
git grep removeMissingIssue .
C4/Serials.pm: &check_routing &updateClaim &removeMissingIssue
C4/Serials.pm:=head2 removeMissingIssue
C4/Serials.pm:removeMissingIssue($subscriptionid)
C4/Serials.pm:sub removeMissingIssue {
t/db_dependent/Serials.t:is(C4::Serials::removeMissingIssue(), undef, 'test removing a missing issue');
Not used anymore
To test:
1) Apply the patch
2) Check serials workflow, no changes must be noted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This column was not used in the Koha codebase, it can be removed.
Test plan:
Execute the updatedatabase.pl script and confirm that the column has
been dropped.
QA step:
1/ git grep totalamount
2/ prove t/db_dependent/Acquisition.t
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1. Replace all calls to $sth->fetchrow_array
with a call to $dbh->selectrow_array
2. Cleaning Review.t file with perltiny
3. Cleaning Review.t && Review.pl files with koha-qa tool
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Testing C4::Review in t/db_dependent/Review.t
Adding a pod for every sub
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/Review.t
-- All 117 tests should run successfully without
any error or warning
TEST PLAN OPTIONAL
------------------
Go check bug 13899 and see that coverage is 100% for this module.
Coverage BEFORE this patch :
Statement : 21,9%
Branch : 0,0%
Condition : 0,0%
Subroutine : 33,3%
Pod : 33,3%
Coverage AFTER this patch :
Statement : 100,0%
Branch : 100,0%
Condition : N/A
Subroutine : 100,0%
Pod : 100,0%
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All tests run
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the moment, it is possible to create records in acquisitions, but the
ACQ framework is only used for items created in this module.
This patch allows to defined default values in the ACQ framework for
records created on the acquisition module.
Test plan:
1/ Make sure you have the ACQ framework created (otherwise create it
from the default framework).
2/ Define a default value for a field (for instance 099$z=1).
3/ Go in the acquisition module and create a new order from a new
record.
4/ Fill mandatory information and save.
5/ Go on the detail page of this record and verify the default value
exist.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As per Chris' comment #17, this improves the testing coverage.
Same test plan as comment #16, but add:
TEST PLAN SUPPLEMENT
--------------------
1) $ prove -v t/db_dependent/Borrower_Discharge.t
-- notice only 5 tests, and generate_as_pdf not tested.
2) Apply this patch.
3) Retest as per comment #16
-- this will test the error and no error cases
tweaked in Koha/Borrower/Discharge.pm
4) remove PDF::HTML
$ sudo apt-get purge libpdf-fromhtml-perl
5) $ prove -v t/db_dependent/Borrower_Discharge.t
-- 7 tests, all successful
6) add PDF::HTML
$ sudo dpkg -i /path/to/libpdf-fromhtml-perl...
-- depends on how you get it. vary accordingly.
7) $ prove -v t/db_dependent/Borrower_Discharge.t
-- 7 tests, all successful
-- Note that is was a different 7th test. :)
8) koha qa test tools
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It will permit not to run another perl interpreter.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a rough start. I believe it runs exponentially
faster, but its equality to the previous version needs to be
tested before I clean it up to acceptable standards.
Nested hashes of hashes was being a debugging nightmare.
Moved the SQL select to C4::Koha.
Changed the GetItemsForInventory to have a hashref parameter.
Added interface, in case there is a need for 'opac' vs. 'staff'.
Added t/db_dependent/Items/GetItemsForInventory.t
Added t/db_dependent/Koha/GetKohaAuthorisedValuesMapping.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When getting the next frequency number, use the real number of days for each month and each year.
Unit tests updated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This guess uses the following algorithm
1/ Get the number of days remaining from first issue of this unit of
time until the end of the unit of time (using 7 days for week, 28 for
month and 365 for year)
2/ Divide it by the number of issues per unit
3/ Take the integer part of the result, this is the number of days to
add to previous serial published date
This patch also try to guess the date of the first issue of a unit of
time. Before that, it was:
- for week: monday of week
- for month: 1st day of month
- for year: 1st day of year
Now it uses firstacquidate.
Example:
firstacquidate = 1970-01-07 (wednesday)
unit = week
issuesperunit = 2 (2 issues per week)
From wednesday to sunday, there are 4 days so we add 2 days to get the
next date.
The next dates should be:
- 1970-01-09 (+ 2 days)
- 1970-01-14 (wednesday of next week)
- 1970-01-16 (+ 2 days)
- ... and so on
Test plan:
1/ Go to numbering pattern creation page (Serials -> Manager numbering
patterns -> New numbering pattern)
2/ In "Test prediction pattern" fieldset, set subscription length to 50
issues (this avoid to compute the next 1000 dates, which can take time)
3/ Fill first issue publication date
4/ Choose the frequency you want to test
5/ click on "Test pattern" button
6/ Check that the dates are correct
7/ Repeat steps 3-7 until you think you have tested enough cases
Interesting frequencies to test:
- 1/day
- 1/week
- 2/week
- 6/week (firstacquidate should be monday or tuesday, or the generated
dates will be the same for all the week)
- 1/month
- 2/month
- 3/month
- 1/year
- 2/year
- 3/year
----------------
Sign off report:
----------------
-Followed the test plan. Unit tests work. Also trying some more strange
frequencies with our librarians:
5/year, 43/year, 10/year.
-Received all serials for a subscription and found no errors.
-Received some serials with frequency 2/month pre-patch, getting publication
date as 1st of every month for each magazine. Having applied the patch,
publication dates started working mid-subscription for new magazines.
-Works well and fine!
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Many libraries would like to be able to import various types of files as
MARC records ( citations, csv files, etc ). We can add a new function to
the plugins system to allow that kind of behavior at a very custom
level.
Test Plan:
1) Ensure you have plugins enabled and configured correctly
2) Installed the attached version 2.00 of the Kitchen Sink plugin
3) Download the attached text file
4) Browse to "Stage MARC records for import"
5) Select the downloaded text file for staging
6) After uploading, you should see a new area "Transform file to MARC:",
select "Example Kitchen-Sink Plugin" from the pulldown menu
7) Click 'Stage for import"
8) Click 'Manage staged records"
9) You should now see two new MARC records!
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described - interesting new feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Previous commit was lacking test coverage of new function.
TEST PLAN
---------
1) Apply all the patches
2) prove -v t/db_dependent/Log.t
-- should be success.
3) koha qa test tools
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tested both unit test patches together.
Without main patch applied: do not pass as expected / with main patch pass OK as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These unit tests reflect the changes done in next patches.
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Verify that these unit tests pass before any changes and after applying
all patches.
Signed-off-by: Courret <scourret@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that the id's are not really used, but rather
the subtags, types, and language related fields.
These tests check for duplicates.
TEST PLAN
---------
1) Apply both patches
2) prove -v t/db_dependent/Languages.t
-- may fail if you have duplicates.
3) ./installer/data/mysql/updatedatabase.pl
-- this will trigger the atomicupdate, which because of
this tweak, will correct duplicates.
4) prove -v t/db_dependent/Languages.t
-- should succeed.
5) Run the updatedatabase.pl script multiple times.
6) prove -v t/db_dependent/Languages.t
-- should still succeed.
7) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors, test run successfully, no more duplicates
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed German description.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some tests were wrong and not executed in a transaction.
Lot of sessions were created in DB because the session was never
flushed.
TEST PLAN
---------
$ mysql ...
> delete from sessions;
^Z
$ prove -v t/db_dependent/BackgroundJob.t
...
$ fg
> select id from sessions;
-- There will be lots of ids (10, if I recall)
^Z
$ git bz apply 13606
...
$ prove -v t/db_dependent/BackgroundJob.t
...
$ fg
> select * from sessions;
-- there should only be the one orphaned job.
You can tell it is correct by the "making new job".
> quit
Run the koha-qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to be sure no report existed before launching the tests.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
prove t/db_dependent/Utils/Datatables_Virtualshelves.t
should return green
Tested together with follow-up, works as expected
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The problem is the template in authority type summary is not respected
at all. It is only read to see which fields and subfields should appear
in the summary.
This patch fixes that.
It also fixes a bug in auth_finder.pl plugin when summary contains
fields other than 2XX.
Test plan:
0/ You must use a UNIMARC setup for those tests
1/ edit an authority type summary with:
NP : [200a][, 200b][ 200d][-- 152b --][ ; 200c][ (200f)] [001*] [ppn: 009*]
2/ create a new authority with previous fields (it is possible some
fields don't exist).
3/ search this authority and verify the summary is someting like:
NP : Name, D.-- NP -- 23849 ppn: my_ppn
4/ Verify some summary for existing authorities and check they are
correct.
5/ Edit a biblio record and use the plugin auth_finder.pl (for example
in a 7XX field)
6/ Do a search and verify the summary is correct
7/ Click on 'choose' or one of the numbered links ('1', '2', ... ; you
should have multiple 2XX fields for the numbered links to show up)
8/ Verify that the biblio field is correctly filled.
/!\ For the ppn, it should be defined in the zebra indexes.
In MARC21 and NORMARC setups, this patch should change nothing, please
verify that too (you can check that the auth_finder.pl plugin is still
working and the auth type summary is correctly displayed in authorities
search and auth_finder.pl plugin).
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works as described, both in authority search result page, and in authority
data entry plugin.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes t/db_dependent/Ratings.t create its own biblio
instead of using a hardcoded '1' fr the biblionubmer.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The tests have been refactored with the module TestBuilder.
Test plan:
1/ Apply the patch 12603
2/ The command : prove t/db_dependent/Category.t has to be a success without error or warning :
t/db_dependent/Category.t .. ok
All tests successful.
Files=1, Tests=3, 1 wallclock secs ( 0.03 usr 0.01 sys + 1.05 cusr 0.05 csys = 1.14 CPU)
Result: PASS
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch contains a new module t::lib::TestBuilder which allows to write tests easier and it contains the unit tests of this module.
For more information, see the documentation of the module.
This module uses the DBIx::Class schema and works with a clean DBIx::Class schema. In order to use it, you have to remove the current circular dependence (existing in the DBIx::Class) by applying the last patch of the bug 11518.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The date comparisons in C4::Members::IssueSlip does not work as
expected.
Is an item is issue yesterday and due today (23:59), it should not be
considered as an overdue yet.
Test plan:
Define a valid issue slip (code ISSUESLIP)
Check 2 items out and update the issuedate value for one of them as
yesterday (using the mariadb/mysql cli or similar)
Print the slip
Before this patch the item marked as issued yesterday is considered as
overdue.
Special cases:
- hourly loans
- Quick slip is impacted too
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces the Koha::FrameworkPlugin object to Koha.
This object supports the current "old-style" plugins while adding a new
style based on the concept of two anynomous subroutines for building and
launching.
I will summarize the advantages of this new approach, justifying the
additional lines of code in this patch:
[1] Centralizing the code for building and launching plugins.
[2] Extensive unit testing: this was not possible before.
[3] Simplicity: Only define what you need in the plugin.
A follow-up patch will delete 1500 lines with *empty* routines.
[4] Make it possible to restore the warnings pragma for all plugins.
New style plugins do no longer depend on redefinition.
[5] Event binding moved from HTML attributes moved to jQuery code.
This separates behavior and presentation.
[6] Much more documentation, including EXAMPLE plugin in follow-up.
[7] Improved error handling.
[8] Usability: property noclick tells you if plugin's buttonDot is active.
[9] More events supported: Change, keyboard/mouse events. See EXAMPLE.
NOTE ON EXAMPLE PLUGIN:
The example plugin is added in the third patch of this report. Since
it is new style, it can be used only after we start using this object. It
also contains an example for a keypress and mouseover event.
NOTE ON ITEM PLUGINS:
Old style plugins for items contain an additional parameter in the js
functions for Blur, Focus and Change. This distinction has no actual use
and is resolved for new plugins in the object code. When converting
item plugins, this minor correction will be addressed. In the meantime
old style item plugins behave as expected.
TEST PLAN:
Run the new test t/db_dependent/FrameworkPlugin.t
At this point in time, you do not need to do anything more. Follow-up
patches will incorporate the object in real-life Koha and provide
additional test plans.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Circulation::AddIssue now returns a Koha::Schema::Result::Issue object
so tests need to be fixed.
The old behaviour was to always return the due date. It now returns
undef if no issue performed. So one of the tests become irrelevant.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that many librarians find it disconcerting to have no feedback
with the new checkouts table. It seems that many of them wait for it to
fully load, check to verify the item was checked out, and only then
check out the next item.
To help alleviate this issue, we can have the checkouts page give
feedback about the item that was just checked out.
Test Plan:
1) Apply this patch
2) Check an item out
3) Note the message "$title ($barcode) due on $date_due"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works well and fixes a very problematic issue with the new AJAX
circ. I will be submitting a follow-up which I think is an improvement
to the display.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
for Kyle M Hall : Adding removal of the 'issues' table
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/Accounts.t
-- All 15 tests should run successfully without any error or warning
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These two subroutines did the same job (same select, same join, etc.)
Test plan:
Go on the basket list page and verify you see the pending and the
cancelled baskets.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Two small things are adjusted in separate follow-ups.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since SearchSubscriptions is the way to search subscriptions, each call
to GetSubscriptions could be replaced by a call to SearchSubscriptions.
Test plan:
Verify following pages display the same thing as before this patch:
- catalogue/detail.pl
- opac/opac-ISBDdetail.pl
- opac/opac-detail.pl
Verify the following page returns correct results:
- serials/checkexpiration.pl
Verify the Serials UT file still passes:
- prove t/db_dependent/Serials.t
Note: The title filter on checkexpiration now only searches on the title
DB field. I don't think it is a regression, it should be the way to use
this field. Maybe should we add new search fields on this form.
Bug 5337 reintroduces a bug fixed by bug 5864, this patch restore the
right way to search subscription (based on biblionumber).
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that this column has never been used.
Test plan:
1/ Execute the updatedatabase entry.
2/ git grep supplierreference should not return occurrence in the code (except
in Koha/Schema/*
3/ prove t/db_dependent/Acquisition.t should return green.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Testing C4::OAI::Sets in t/db_dependent/OAI/Sets.t
Adding &DelOAISetsBiblio in @EXPORT at the beginning
of OAI/Sets.pm, it was the only one missing
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/OAI/Sets.t
-- All 145 tests should run successfully without any error or warning
3. Run koha qa test tools
-- No issues found.
Additionally, I comfirmed why DelOAISetsBiblio was added in
the list of exported functions.
$ grep "^sub " C4/OAI/Sets.pm | sort > check1
$ for i in `grep "\&[A-Z]" C4/OAI/Sets.pm | xargs `; do echo $i; done | sort > check2
Of course the outputs have a little extra around them, so
$ vi check1
$ vi check2
$ diff check1 check2
Lo and behold, it was that one function. Necessary for 100% coverage.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Auth_with_cas::_url_with_get_params should return the right
URL for intranet.
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edit: added a proper commit message. Sort of :-P
Signed-off-by: Jen DeMuth <jdemuth@roseville.ca.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The circulation page has a new entry: a link to a list of the pending
in-house use.
Bug 10860 introduces a new way for managing in-house uses.
This patch adds a new page (from the circulation home page) to list all
pending in-house uses.
Test plan:
Go on the circulation home page and click on the in-house use link.
Verify all your in-house uses are listed and information are consistent.
Bug 11201: Display lib instead of AV code
This patch assumes that items.location is linked the the LOC
authorised values.
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Reserves:
* Added OnShelfHoldsAllowed() to check issuingrules
* Added OPACItemHoldsAllowed() to check issuingrules
* IsAvailableForItemLevelRequest() changed interface, now takes
$item_record,$borrower_record; calls OnShelfHoldsAllowed()
opac/opac-reserve.pl and opac/opac-search.pl:
* rewrote hold allowed rule to use OPACItemHoldsAllowed()
* also use OnShelfHoldsAllowed() through
* IsAvailableForItemLevelRequest()
templates:
* Removed AllowOnShelfHolds and OPACItemHolds global flags, they now
only have meaning per item type
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I have tested this patch left, right and upside down for the last
several months. All tests have passed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no need to define biblioitem routines, if we can access them
via biblioitemnumber.
Note that we actually need a FK for biblio in the items table. Now we do
need the intermediate level via biblioitems in the Items.t code. Even better,
we should move biblioitem to biblio. Formally it is 1-n, but in reality it
is 1-1.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the 3 constraints added by patch from bug 11518.
Having 1-n + 1-1 relations for the same field is a non-sense.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a follow-up for removing some unneeded code.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Verify that unit tests pass with
prove t/db_dependent/Acquisition/OrderUsers.t
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added small patch to allow barcode as input in TransferSlip routine, mostly
to allow generating transfer slips where only barcode is present (aka.
javascript).
Test plan:
1) find book with <barcode> and <itemnumber>
2) generate transferslips with both:
transfer-slip.pl?transferitem=<itemnumber>3967925&branchcode=MPL&op=slip
transfer-slip.pl?barcode=<barcode>&branchcode=MPL&op=slip
and verify that the generated slips match.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit:
- Added tests in t/db_dependent/Circulation_transfers.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Works with both itemnumber or barcode as described.
Tested printing transfer slips with the URL examples given
and in the UI.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We don't want to recreate a new connection to the DB every time we want
a new schema.
This patch creates a $database package level variable on the same way
it's done in C4::Context for $dbh.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds unit tests for the previous changes and centralize the
timezone handle into the Koha::DateUtils module.
Like that the behavior will affect all date manipulations using this
module (should be all dates in Koha).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch also adds 1 test.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The idea behind this is to have a pair of base classes on which to build
our new generation of Koha objects. Koha::Object is a base class, which
in it's most basic form, is to represent a row in a table. For example,
Koha::Borrower inherits from Koha::Object. So too could Koha::Biblio
and Koha::Item for example.
Koha::Objects is to represent a way to fetch and manipulate sets of
objects. For example, Koha::Borrowers has a method to get a
Koha::Borrower object by id and a method to search for an get a list
of Koha::Borrower objects. Right now Koha::Objects has only the
essentials but can easily be extended and those enhancements will be
passed down to all the child classes based on it.
By using these classes as a base, we will add consistency to our
code, allow us to keep our code DRY, reduce bugs, and encapsulate our
database access among other benefits.
Test Plan:
1) Apply this patch
2) prove t/Object.t t/db_dependent/Object.t t/db_dependent/Objects.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The tests highligh the problem: if the parent_ordernumber attribute is
not set on inserting an order, the object returned by the method does
not contain the value (undef).
Test plan:
Verify the tests are consistent and
prove t/db_dependent/Acquisition/CancelReceipt.t
should return green.
You can also verify that receive partially an order and cancel the
receipt work as expected.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Booksellers.t and Koha_template_plugin_Branches.t both had
function calls to ::set_userenv added to them. This patch handles
those additions.
TEST PLAN
---------
1) Branch a new git branch
2) prove -v t/db_dependent/Bookseller.t
-- It should work.
3) prove -v t/db_dependent/Koha_template_plugin_Branches.t
-- It should work.
4) Apply only the first patch.
5) Repeat steps 2 and 3.
-- They should both FAIL!
6) Apply the second patch as well.
7) Repeat steps 2 and 3.
-- The should both work.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There were multiple calling conventions for C4::Context's
set_userenv routine. So the following commands were used to
find discrepancies:
grep "::set_userenv" `find .`
grep "\->set_userenv" `find .`
The first grep demonstrated that the smaller change is from
:: to -> as only C4/Auth.pm, installer/InstallAuth.pm, and
t/db_dependent/Circulation.t would need to be modified. This
patch corrects C4::Context's set_userenv routine to be object
call based (use ->) by using a shift to ignore the first
parameter, and modify the three files found with :: calls.
As the result of trying to roll a distribution,
t/Circulation_barcodedecode.t was discovered to be faulty. The
cause being incorrect parameters! This was hidden when there
was no shift in the set_userenv routine. However, with its
correction, the test broke.
This led me to read the POD documentation for the function
set_userenv in C4::Context and realize it was outdated as
well. It has been revised to match the current version of
the function.
Then intentionally bad parameters passed to the set_userenv
routine in C4::Context were hunted down. The biggest problems
were missing surnames or branch names.
Rebase required because of shibboleth change in C4/Context.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In this special case (the suggestion is linked to "all funds"), the
budgetid value should be NULL in DB.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes old and new tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The DB field suggestions.budgetid should be linked to
aqbudgets.budget_id.
If the fund is removed, this column should be set to NULL.
Test plan:
1/ Using your SQL CLI (or equivalent), create or update 1+ suggestions and
set "0" in the budgetid field (or a nonexistent budget id).
2/ Execute the updatedabase script.
3/ Verify that your suggestion is unlinked to the nonexistent fund.
4/ Verify the constraint has correctly been added (show create table
suggestions).
5/ Check that this change does not affect the behavior on adding a
suggestion (linked to a fund or not).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1. Add 4 item search fields (in Administration › Items search fields):
a. 1 biblio field linked to a DB field
b. 1 biblio field not linked to a DB field
c. 1 item field linked to a DB field
d. 1 item field not linked to a DB field
2. Make sure you have some data in those fields to search on.
3. Go to item search page and do a search using these new fields, make
sure the result is correct.
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The package name for SIP wasn't fixed in the tests by the original patches.
This patch fixes it.
To test:
- Run
$ prove t/db_dependent/SIP_ILS.t
- Tests should pass with the patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Running
$ prove t/db_dependent/XSLT_Handler.t
raises a couple warnings because of variable redefinitions. This small patch fixes that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds an optional hashref argument to the XSLT_Handler
transform() method. It allows you to send key => value pairs
parameters to the XML::LibXSLT object, which you can reference
in a XSLT via <xsl:param name="XXX" />.
The parameter value is evaluated as an XPath query, so you can only
pass quoted strings (i.e. "'test'") or numbers. Otherwise, the
XSLT engine will interpret it as a Xpath query and will run it
on the XML that you're transforming.
The most common use case is sending strings to a XSLT. In my case,
this is an OAI-PMH identifier that comes in a OAI response but not
the actual metadata. See the following link from the official POD:
http://search.cpan.org/~shlomif/XML-LibXSLT-1.92/LibXSLT.pm#Parameters
_TEST PLAN_
1) Run "perl t/db_dependent/XSLT_Handler.t". If all tests pass,
you should be free to sign off. Feel free to inspect the last
test in XSLT_Handler.t and the XSL in test04.xsl to see how it
works.
If you really want to be thorough, you could write your own test
cases using mine as an example.
Alternatively, you could go into C4::XSLT, and try to pass a
value to a parameter in the search results or the detail page,
but that might be a bit over the top.
It's a pretty simple patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11111 adds a basket group column on the parcel page.
But it seems that the already received orders never contain the value
(always 'no basket group').
Test plan:
Receive an order which is in a basket group and verify the basket group
column is correctly filled.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Based on comment #3, this corrects CPL and S issues if they do
not exist in the DB.
TEST PLAN
---------
0) Backup your DB.
1) Clear CPL and S from your DB.
- delete from borrowers where categorycode='S';
- delete from categories where categorycode='S';
- delete from borrowers where branchcode='CPL';
- delete from branch where branchcode='CPL';
2) prove t/db_dependent/Suggestions.t
-- This should fail.
3) Apply patch
4) prove t/db_dependent/Suggestions.t
-- This should work.
5) Intentionally add categorycode 'S' and branchcode 'CPL' back
into the database.
6) prove t/db_dependent/Suggestions.t
-- This should work.
7) run koha qa test tools.
8) Restore your DB :)
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN
---------
1) Make sure you have more than 8 item types, and preferably
something with a non-sample default code for itemtypes.
2) prove t/db_dependent/Suggestions.t
-- this will fail
3) Apply patch
4) prove t/db_dependent/Suggestions.t
-- this will succeed
5) run koha qa test tools
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes the test look for the warnings Koha::XSLT_Handler raises
instead of just throwing them to STDERR.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The additional way of parameter passing is tested in three additional
tests.
Test plan:
Verify if XSLT_Handler.t passes.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This routine is not used and can be removed.
Test plan:
git grep GetLateIssues
should not return any result
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces two tests for encoding issues on about > timeline
To test:
- Apply the patch and run
$ KOHA_USER=kohaadmin KOHA_PASS=katikoan KOHA_INTRANET_URL=http://koha-dev.biblioadmin prove t/db_dependent/www/history.t
(adjust to your own settings, the user needs to have access to the about page)
Regards
Signed-off-by: Manuel Cohen Arazi <manuelcohenarazi@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To insert items info you need to use correct code of sublibrary, not always the code is correct. Items info are not important for this test, so the fields are deleted (952 in MARC21, 995 in UNIMARC)
http://bugs.koha-community.org/show_bug.cgi?id=13264
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
New tests in search_utf8.t, now are tested also records with only utf-8 chars that could see also as latin-1 chars
http://bugs.koha-community.org/show_bug.cgi?id=13264
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This patch addes two new files .mrc for marc21 and unimarc to test chars in utf8/latin-1 section only, to be sure that perl doesn't switch between utf-8 nad ISO 8859-1 inside itself.
http://bugs.koha-community.org/show_bug.cgi?id=13264
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
add a test in auth_values_input_www to check chars that could be Latin-1 or UTF-8
http://bugs.koha-community.org/show_bug.cgi?id=13264
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Dupliacate record in marc21 and unimarc files, so the search finds always more than one result.
http://bugs.koha-community.org/show_bug.cgi?id=13264
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
t/db_dependent/www/search_utf8.t and
t/db_dependent/www/intranet_search_utf8.t were quite similar, I merged
them into a single file (t/db_dependent/www/search_utf8.t).
On the way, I added some tests for them.
Note that you will need the last patch on branch bug_11944 to see the
tests pass.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The utf-8 test do: insert a biblio record with tool, search the record in intranet,
delete batch upload and biblio records.
To test: prove intranet_search_utf8.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
In previous version of the test opac_utf8.t clears import from resevoir
but it doesn't delete record from biblio table in MySQL.
This the standard work of the feature, see:
http://manual.koha-community.org/3.18/en/catalogtools.html#managestaged
Now the script deletes also record on MySQL level.
No necessary on Zebra level because it uses a temporaney Zebra index that it is
clenaned at the end of the script.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This patch makes opac_utf8.t launch its own:
- zebrasrv process
- rebuild_zebra.pl (daemon mode)
It also takes care of killing them when finished. It sets a frecquency
of 5 seconds for the indexer, and waits 10 just in case before looking
for the indexed records.
To test:
- Just launch the tests.
Edit: fixes on the license text.
Regards
Tomas
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This patch removes the test for a running MySQL process.
It is already implied by successfuly loading C4::Context.
It also fixes the license text.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This test check utf-8 support on web intranet interface for authorized values.
It test input, search and delete of utf-8 values.
If all OK it destroy values inserted
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This test need to setup zebraserver and background indexing.
You need to set also KOHA_INTRANET_URL and KOHA_OPAC_URL
in the user enviroment.
It imports sample records and retrieves them on hte OPAC through
Apache.
To run it: prove opac_utf8.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The records shares enough chars to do the same search ('deuteros') to
find them and check the same utf-8 chars.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The mock function of GetMemberAccountRecord did not properly
account for the undef case. This was corrected.
Then all 4 combinations of borrower number and card number being
defined or not were called to GetMemberDetail.
The problematic test case is where the borrower number is
undefined and the cardnumber is defined.
TEST PLAN
---------
1) Apply just this first patch.
2) prove -v t/db_dependent/Member.t
-- This should fail!
3) Run koha QA test tools.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a "None" option for the fund filter.
Test plan:
1/ Go on the suggestion search page
2/ Search suggestions not linked to a fund using the "None" option.
3/ Search all suggestions (linked or not to a fund) using the "Any" option.
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As C4::Bookseller is no longer imported in C4::Acquisition the tests
fail because of an undefined function call.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Full test report on the bug report.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Bookseller module and put in
it the code from GetBookSeller and GetBookSellerFromId.
Test plan:
1/ Create a bookseller, modify it.
2/ Add contacts for this bookseller
3/ Create an order, receive it, transfer it
4/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
By adding quotes 3 and 25 from the sample data, this test can
pass without having the sample quote data loaded.
TEST PLAN
---------
1) Ensure there is no quote id=3 or that it is NOT
Abraham Lincoln.
2) prove t/db_dependent/Koha.t
-- this should fail the daily quote test.
3) apply patch
4) prove t/db_dependent/Koha.t
-- this should *NOT* fail the daily quote test.
5) run koha qa test tools
Followed test plan 1)-4). Without patch, daily quote test failed. With patch, test passed OK.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, leaves actual data unchanged.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Check_Userid assumes that a borrowernumber will always be passed in
and thus fails to to return 0 for an already used userid when creating
a new patron.
Unit tests must now also me modified to no longer assume it is possible
to create multiple patrons with the same userid.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
However, this is an unreasonable assumption for a system which
is in use (either lots of testing or production).
TEST PLAN
---------
1) Have a supplier with a late subscription.
2) prove t/db_dependent/Serials/Claims.t
-- will fail
3) apply patch
4) prove t/db_dependent/Serials/Claims.t
-- success
5) run koha qa test tools
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes that assumption by expressly setting data
to be default.
TEST PLAN
---------
1) Ensure that branch code is NOT 'MPL' in the
repeatable_holidays table in your database.
2) Ensure that branch codes 'MPL' and 'CPL' do not exist
in the branches table in your database.
3) prove t/db_dependent/Holidays.t
-- this should bomb horribly.
4) Apply patch
5) prove t/db_dependent/Holidays.t
-- all tests should succeed.
6) run koha qa tests
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tests pass without holidays in the calendar.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
GetHistory iterated on the orders to calculate the quantity and price.
These values are never used by the called.
It can be removed.
Test plan:
Verify there is no regression on acqui/histsearch.pl and
catalogue/detail.pl
Actually you just have to check that the total quantity and price are
not displayed on these views.
QA: note that 'count' and 'toggle' are never used in the template.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
checkpw_ldap should return 0 if it is not an anonymous bind, and authentication
fails. This is better explained on the bug comments. This is just a regression
test for the revised functionality.
To test:
- Run
$ prove t/db_dependent/Auth_with_ldap.t
=> FAIL: it fails because C4::Auth_with_ldap doesn't match the expected behaviour
- Apply the bugfix from Martin
- Run
$ prove t/db_dependent/Auth_with_ldap.t
=> SUCCESS: tests now pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These 2 bugs are in conflict.
The first one always join the issue table, the second one join on this
table too if the OnSiteCheckouts pref is enable.
So DBI raises an error if the pref is enabled (2 joins on the same
table).
This patch removes the conditional join.
Test plan:
Go on a detail record page with items and verify that items are list and
that the error no more appears in the log file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Reproduced the problem, the patch fixes it, no noticeable regression found.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, items are visible again.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
According to the manual, "Items will stay in the PROC location until
they are checked in".
This is not the actual behavior. Right now items will only change from
PROC to CART, and that is only if InProcessingToShelvingCart is enabled.
Some libraries want to use the PROC to permanent location feature,
without using the CART.
Additionally, the location is only removed if using returns.pl, but
that is not what the manual says either. What if the library uses
SIP2 devices for handling returns? This should be taken into
account.
Test Plan:
1) Apply this patch
2) Set an item's current location to PROC, and it's permananet location
to a different location.
3) Check the item in any way you wish
4) Note the shelving location is updated to the permanent location
5) prove t/db_dependent/Circulation/Returns.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested this with items which had items.location set to 'PROC' and
items.permanent_location set to NULL, '', and a real value, and it
worked correctly in all cases. I tested with check-ins from returns.pl
and from the table of checkouts in circulation and the PROC location was
correctly removed in both cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=5304
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No commit message
No test plan.
prove t/db_dependent/Items.t pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This fix is a global fix for the MarcModificationTemplate feature.
Some unit tests were missing and some behaviors were wrong.
For instance, if you tried to update a non existent field, the script
crashed.
The following line was completely stupid:
if $from_field ne $to_subfield
The field_number equals 1 if the user wants to update the first field
and 0 for all fields.
The field_numbers (note the s) variable contains the field numbers to
update. This array is filled if a condition exists (field exists or
field equals).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Make sure the ModifyRecordWithTemplate routine returns undef.
This patch also removes a warning if GetModificationTemplates is called
without parameter.
Verify
prove t/db_dependent/MarcModificationTemplates.t
returns green.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These UT reflect this change:
- deletion of the field 245 if 245$a='Bad title'
- move of the 650 field to 651 if 650$9=499
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There's no point creating a MARC record with undef subfields
for testing holds. This patch avoids that so no warnings are shown.
To test:
- Run
$ prove t/db_dependent/Holds.t
=> FAIL: verify several warnings show
- Apply the patch
- Re-run
=> SUCCESS: no warnings showed.
- Sign off :-D
Regards
NOTE: Not noticable under Ubuntu 12.04 LTS, but verifiable under
Debian Wheezy.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Allow on shelf holds needed to be enabled
* Added some error supression code for undefined string comparison
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The last test (#74) did not print anything. It now does..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These new unit tests will fail due to the fact that Koha::Database
uses a separate dbh handle than C4::Context->dbh
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the way CanBookBeReserved() and CanItemBeReserved() return error
messages and how they are dealt with in the templates. This change makes it possible
to distinguish between different types of reservation failure.
Currently only two types of errors are handled, all the way to the user, from the CanItemBeReserved():
-ageRestricted
-tooManyReserves which translates to maxreserves
#############
- TEST PLAN -
#############
((-- AGE RESTRICTION --))
STAFF CLIENT
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Place a hold for the underage Borrower for the ageRestricted Record.
4. You get a notification, that placing a hold on ageRestricted material is
forbidden. (previously you just got a notification about maximum amount of reserves reached)
((-- MAXIMUM RESERVES REACHED --))
0. Set the maxreserves -syspref to 3 (or any low value)
STAFF CLIENT AND OPAC
1. Make a ton of reserves for one borrower.
2. Observe the notification about maximum reserves reached blocking your reservations.
((-- MULTIPLE HOLDS STAFF CLIENT --))
3. Observe the error notification "Cannot place hold on some items"
((-- MULTIPLE HOLDS OPAC --))
1. Make a search with many results, of which atleast one is age restricted to the current borrower.
2. Select few results and "Place hold" from to result summary header element.
(Not individual results "Place hold")
3. Observe individual Biblios getting the "age restricted"-notification, where others can be
reserved just fine.
Updated the unit tests to match the new method return values.
t/db_dependent/Holds.t & Reserves.t
Followed test plan. Works as expected and displays meaningful messages for the reason why placing a hold is not possible.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- a new maintenance script batch_sanitize_records
- a new subroutine C4::Charset::SanitizeRecord
- new unit tests for the new subroutine
Test plan:
1/ prove t/db_dependent/Charset.t
2/ Create a record containing "&amp;" (could be follow with as many
'amp;' as you want) in one of its fields and the same for the field
linked to biblioitems.url.
The url should not be sanitized, it may contain "&".
3/ Launch the maintenance script with the -h parameter to see how to use
it.
4/ Launch the script using the different parameters:
--filename=FILENAME
--biblionumbers='XXX'
--auto-search
The auto-search permits to sanitize all records containing "&amp;" in
the marcxml field.
Use the verbose flag for testing.
Without the --confirm flag, nothing is done.
5/ Use the --confirm flag and verify in the biblioitems.marcxml field
that the record has been sanitized.
6/ Try the --reindex flag to reindex records which have been modified.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no reason for underage borrowers to reserve ageRestricted material and
then be denied it's check-out due to ageRestriction.
This patch prevents reserving material for borrowers not suitably aged.
# # # # # #
# A PRIORI #
# # # # # #
BOTH THE STAFF CLIENT AND THE OPAC
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Place a hold for the underage Borrower for the ageRestricted Record.
4. You can reserve an ageRestricted Record with ease.
STAFF CLIENT ONLY
5. Check-in an Item from the ageRestricted Record and catch the reservation.
6. Check-out the ageRestricted Item for this underage Borrower.
7. You get a notification about being unable to check-out due to age restriction.
How lame is that for a 12 year old?
# # # # # # # #
# A POSTERIORI #
# # # # # # # #
STAFF CLIENT
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Check-out an ageRestricted Item for this underage Borrower.
4. You get a notification about having the maximum amount of reserves.
5. Place a hold for the underage Borrower for the ageRestricted Record.
6. You get a notification, that placing a hold on ageRestricted material is
forbidden.
Includes Unit tests.
Followed test plan. Patch behaves as expected. (Note: Propagating error messages to template will be handled in Bug 13116 or 11999)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the logic of deciding whether or not a borrower is old enough to access this material
to its own function GetAgeRestriction.
This makes it easier to use AgeRestriction elsewhere, like with placing holds.
This feature adds a new function C4::Members::SetAge() to make testing ages a lot easier.
A ton of Unit tests included.
C4::Circulate::CanBookBeIssued() fixed and issue with undefined $daysToAgeRestriction per Marc Véron's
suggestion.
Test plan:
(See comment #10 for screenshots about using age restriction)
1) Without patch
Configure Age Restricition (see Syspref AgeRestrictionMarker) and have a biblio record with e.g. PEGI 99 in age restriction field
Try to check out to a patron with age < 99
Check out should be blocked
Change entry in age restriction field to PEGI99
Check out schould now be blocked
2) With patch
Try checkouts again, behaviour should be th same.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
While testing the string change on 12264, I had this result:
DBD::mysql::st execute failed: Column 'biblioitemnumber' cannot be null at /usr/share/koha/testclone/C4/Items.pm line 2191.
DBD::mysql::st execute failed: Column 'biblioitemnumber' cannot be null at /usr/share/koha/testclone/C4/Items.pm line 2191.
# Child (GetItemsInfo tests) exited without calling finalize()
not ok 4 - GetItemsInfo tests
This was caused by this line in the unit test:
my $biblionumber = get_biblio();
This routine returns:
return ($bibnum, $bibitemnum);
So instead of the bibnum the bibitemnum is saved in biblionumber.
In my test database bibnum and bibitemnum somehow got out of sync, revealing
this bug :)
The fix is just adding parentheses:
my ( $biblionumber ) = get_biblio();
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
One of the tests claims 'item-level_itypes is disabled'
when it should be 'item-level_itypes is enabled'.
Patch fixes this.
To test:
- run t/db_dependent/Items.t
- tests should all pass
- verify the last test reads 'enabled'
- look at the code and see it's true
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The default value for *by and *date fields is NULL.
But without this patch, the values are 0 or 0000-00-00.
It comes from the fact that the form set to an empty string the values
and DBIX::Class does not consider them as undefined.
This patch is very ugly, not sure how we can fix that.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
No regressions found, adding and editing suggestions from
OPAC and staff.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutines NewSuggestion and ModSuggestion use DBIx::Class instead of C4::SQLHelper.
Moreover, the tests and the .pl have been adapted.
Test plan:
1) Apply the patch.
2) Execute the unit tests by launching :
prove t/db_dependent/Suggestions.t
3) The result has to be a success without error or warning :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=91, 2 wallclock secs ( 0.05 usr 0.01 sys + 1.65 cusr 0.09 csys = 1.80 CPU)
Result: PASS
4) Log in the intranet, create a suggestion and verify the created suggestion.
5) Edit a suggestion from the intranet and verify the suggestion is correctly modified.
6) Log in the OPAC and verify you can add a suggestion.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, suggestion created on staff and opac,
suggestion edited without problems, no koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script:
Also tested:
- adding suggestion from staff and OPAC
- edit suggestion from staff
- deleting suggestion from OPAC
- changing to a normal status (email got created)
- changing to a custom status (SUGGEST_STATUS)
- display of custom status in OPAC
No problems found.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
package Koha::Item::Search::Field
function C4::SQLHelper::GetColumns
function C4::Items::SearchItems
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tests run without error
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- use Modern::Perl;
- fix a typo
- remove an old comment
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This feature will allow libraries to specify that, when an item is returned,
a local hold may be given priority for fulfillment even though it is
of lower priority in the list of unfilled holds.
This feature has three settings:
* LocalHoldsPriority, which enables the feature
* LocalHoldsPriorityPatronControl, which selects for either tha patron's
home library, or the patron's pickup library for the hold
* LocalHoldsPriorityItemControl, which selects for either the item's
holding library, or home library.
So, this feature can "give priority for filling holds to
patrons whose (home library|pickup library) matches the item's
(home library|holding library)"
Test Plan:
1) Apply this patch
2) Run t/db_dependent/Holds/LocalHoldsPriority.t
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to set an owner to a fund hierarchy
On editing a fund, if it has children, a new checkbox appears "Set this
owner to all children funds".
If checked, all the fund hierarchy will herit to this owner.
This will facilitate the fund owner modifications.
Test plan:
- Verify that the new checkbox only appears if the fund has at least a child.
- Create a consistent fund hierarchy, something like:
fund1
fund11
fund111
fund12
fund2
fund21
- Try to modify a fund owner without checking the checkbox. Verify the
children have not been modified.
- Try to modify a fund owner with checking the checkbox. Verify all fund
hierarchy has been modified.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works as announced.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Unit test added
http://bugs.koha-community.org/show_bug.cgi?id=11876
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
While updating the number of unit tests from 12 to 13,
the number of tests to skip due to a outdated version
of DBD::Mock was missed.
This patch retains the test number change, and corrects
the number of tests.
TEST PLAN
---------
1) prove -v t/db_dependent/ReportsGuided.t
-- on an UBUNTU git (lacks DBD::Mock >= 1.45)
2) prove -v t/db_dependent/ReportsGuided.t
-- on a DEBIAN git (has DBD::Mock >= 1.45)
3) compare results.
-- skipped tests should be 8 (2 individual tests + 6 in the loop)
under Ubuntu.
-- non-skipped tests should align.
-- everything should be 13 tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
By tweaking the GetReservedAuthorisedValues function in
C4::Reports::Guided, biblio_framework can be added as a dropdown
list into the guided reports parameters.
The change in C4/Reports/Guided.pm required a test, which is
found in t/db_dependent/ReportsGuided.t
Code was then added to reports/guided_reports.pl to build the
appropriate hash to trigger the proper dropdown list.
TEST PLAN
---------
1) Apply patch
2) prove -v t/db_dependent/ReportsGuided.t
-- all should pass, this confirms that both
C4/Reports/Guided.pm and this test file work.
3) Log into staff client
4) Reports
5) Create from SQL
6) Enter appropriate information like:
Report name: Test 13141
-- no need to change Report group or Report is public or Notes or Type
SQL:
SELECT CONCAT('<a href=\"/cgi-bin/koha/catalogue/detail.pl?biblionumber=',
biblio.biblionumber,'\">',biblio.biblionumber,'</a>') AS
BiblioNumbers, title, author, frameworkcode
FROM biblio
WHERE frameworkcode=<<Enter the frameworkcode|biblio_framework>>
7) Save report
8) Run report
-- The parameter entry page should have a drop down of
framework codes.
9) Select a framework code, and click Run the report
-- The displayed SQL should have a "frameworkcode=" portion
matching the selected framework.
10) Run the koha qa test tool.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan followed successfully.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The unit tests did not take into account the new DB field.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Also all Acquisition related
patches.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Modifying C4/Tags.pm should have tests.
TEST PLAN
---------
1) Apply this test patch only.
2) prove -v t/db_dependent/Tags.t
-- should see two warnings.
3) Apply the first patch.
4) prove -v t/db_dependent/Tags.t
-- no warnings.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Order module and put in
it the code from NewOrder and NewOrderItem.
Test plan:
1/ Create an order, modify it, receive it, cancel the receipt.
2/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
this patch:
- reintroduces the ISSN column
- fix a wording (already there before the main patch)
- fix the tests if a serial was already in late
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small change: Removed 2 tabs in claims.tt and fixed order
of ISSN/Issue number column descriptions as they were switched.
Note: The <order> tags are currently not stripped out of the
notice.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new DB field serial.claims_count
This field already exists for late orders. It makes sense to introduce
it for serial.
Test plan:
0/
a) Does not apply the patch.
b) Remove all your claimissues notices and be sure you have some serial issues
in late.
c) remove email address for the vendor you will use.
d) remove email address for the logged in user.
e) Export claims using the csv export => The selected issues will be
marked as claimed.
f) logout/login (to update the email address).
1/ Apply the patch and execute the updatedb entry.
2/ Go on the Serials > Claims page
3/ Verify that you get a warning message 'No claimissue notice defined'
4/ Verify the vendor list is correct (with the number of serial in late.
You should not get any changes here.
5/ Select one vendor and verify that the issue which was claimed before
has a claim count set to 1.
6/ Verify that you are not able to send notification to the vendor.
7/ Create a claimissue notice.
Something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
8/ Go on the Serials > Claims page, the warning message does not appear
anymore.
9/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for this vendor).
10/ Add an email for the vendor.
11/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for your user).
12/ Add an email address to your user
logout/login
13/ Select issues. Select a notice. And "Send notification".
You should get a happy message: the email has been sent!
14/ The email will contain the order tags if bug 12851 is not
pushed/applied.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some small issues fixed in a follow-up.
Note: If you change the email address of your staff user, you will
have to log out and back in to make the change take effect.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that this column has never been used.
Test plan:
1/ Execute the updatedatabase entry.
2/ git grep cancelledby should not return occurrence in the code (except
in Koha/Schema/*
3/ prove t/db_dependent/Acquisition.t should return green.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I couldn't find any trace of this column being used.
Passes tests and QA script, updates all necessary files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tests need to learn about the new fields in the branches table.
To test:
prove t/db_dependent/Branch.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the 23 July development meeting it was decided to formally deprecate
GRS-1 indexing mode for Zebra. This patch makes code fallback to DOM
on the remaining places. No behaviour change should be noticed, as DOM
has been the default for a while.
Regards
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Also checked running Makefile.PL
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added a MoveMemberToDeleted set of tests.
TEST PLAN
---------
1) prove -v t/db_dependent/Members.t
-- all should pass.
2) Run koha QA tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Due to the fact that Sunday is a repeating holiday in the example data
which is used for part but not all of Holidays.t, the last test will
fail on Sundays. The test is to see if today is *not* a special holiday
for MPL, but since it's already a repeating holiday, is_holiday will
return true rather than false.
Test Plan:
1) Wait until Sunday
2) prove t/db_dependent/Holidays.t
3) Note the failure
4) Apply this patch
5) Repeat step 2
6) Note there is no longer a failure
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Used my time machine... :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If an item is edited and a field is not mapped to Koha, it is to 0 or
NULL (depending on the default value defined).
This patch adds a check on the mapping before editing the item. It there
is no mapping, the DB value is not erased.
Test plan:
1/ Edit an item and fill a value for a field
2/ Unmap this field
3/ Edit the item
4/ Verify that the value is not erased (using the MySQL CLI)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix the subroutine name and add a restriction on the
arguments: both argument are mandatory!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
User may cancel his own reservation at waiting or in transit status
through calling opac-modrequest.pl. Cancel button is disabled in
interface but possibility to cancel should be checked also in
opac-moderequest.pl, before calling CancelReserve().
Similar situation is with opac-modrequest-suspend.pl
This patch provides new soubroutine to chceck if user can cancel given
reserve. It's possible only when he's owner of hold and hold isn't in
transfer or waiting status.
Additionaly there are new test for this function in Reserves.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and new tests.
Works as described, tested with:
.../cgi-bin/koha/opac-modrequest.pl?reserve_id=XXX
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces a unit test for the new get_report_areas functionality.
To try it, run
$ prove t/db_dependent/Reports_Guided.t
It is expected to have 16 tests defined, and to fail the introduced one
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The patch for bug 12827 has been written some days before bug 10402. One
occurrence of NewOrder has not been modified.
Test plan:
prove t/db_dependent/Letters.t
should return green.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CancelHold takes two parameters: patron_id and item_id.
If item_id is considered as an itemnumber, holds on title can't be
canceled.
If item_id is considered as a biblionumber, all holds on this
biblionumber (for a borrower) will be canceled.
So CancelHold have to consider item_id as a reserve_id.
- Added subroutine C4::Reserves::GetReserve
- C4::ILSDI::Services::GetRecords now returns the reserve_id
- Fix the text in the ilsdi.pl?service=Describe&verb=CancelHold page
- Unit tests for CancelReserved and GetReserve
- Do not delete row in reserves table if insert in old_reserves fails
Signed-off-by: Leila and Sonia <koha.aixmarseille@gmail.com>
Signed-off-by: Benjamin Rokseth <bensinober@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signing off, while noting a style issue in the patch review
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Placed and cancelled a hold using ILS-DI successfully.
Adding a follow-up to also update the ils-di documentation
page in the bootstrap theme.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
EDIT: I removed the changes it did to the prog theme.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
NewOrder should be more tested!
This patch moves the existing unit tests into a new file and adds some
unit tests.
Note that there is no DB field aqorders.subscription, so the test in
NewOrder can be removed.
Test plan:
prove t/db_dependent/Acquisition/NewOrder.t
and
prove t/db_dependent/Acquisition.t
should return green.
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since the basketno parameter is needed to insert an order, it is useless
to return it.
This patch changes the prototype for the C4::Acquisition::NewOrder
subroutine. The return value is now a scalar containing the ordernumber
created.
Test plan:
Verify there is no regression on an acquisition workflow:
1/ Create an order with several items
2/ Modify the order
3/ Receive some items
4/ Cancel the receipt
4/ Receive some items
5/ Receive all remaining items
6/ Cancel the receipt
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The behavior is quite weird, but
$schema->resultset('Table')->create($data)->id
does not return the id inserted if $data contains the key.
To be more clear, in this case
$schema->resultset('Aqorder')->create($new_order)->id
returns an empty string because $new_order->{ordernumber} is an empty
string!
This was not caught by the unit tests, I added one.
Test plan:
- AcqCreateItem set to ordering
- Create an order with items and verify items are correctly linked to the
order.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed that without the patch the created item is not linked to the
order (entry in aqorders_items). With the patch, it works as expected.
Passes tests and Koha QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes two unit tests that broke because of the new feature.
Also adds some new test cases.
To test:
1) prove t/db_dependent/Circulation.t
2) prove t/db_dependent/Circulation_Issuingrule.t
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There are two unnecessary diag statements:
- Creating biblio instance for testing.
- Creating item instance for testing.
TEST PLAN
---------
1) prove t/db_dependent/Holds.t
t/db_dependent/Holds.t .. 1/38 # Creating biblio instance for testing.
Use of uninitialized value in subroutine entry at /home/tcohen/git/koha-community-src/C4/Charset.pm line 181.
# Creating item instance for testing.
Use of uninitialized value in subroutine entry at /home/tcohen/git/koha-community-src/C4/Charset.pm line 181.
Use of uninitialized value in subroutine entry at /home/tcohen/git/koha-community-src/C4/Charset.pm line 181.
t/db_dependent/Holds.t .. ok
All tests successful.
Files=1, Tests=38, 1 wallclock secs ( 0.03 usr 0.01 sys + 1.13 cusr 0.11 csys = 1.28 CPU)
Result: PASS
-- They are in the first and fourth lines of this sample output
2) apply patch
3) prove t/db_dependent/Holds.t
t/db_dependent/Holds.t .. 1/38 Use of uninitialized value in subroutine entry at /home/mtompset/kohaclone/C4/Charset.pm line 186.
Use of uninitialized value in subroutine entry at /home/mtompset/kohaclone/C4/Charset.pm line 186.
Use of uninitialized value in subroutine entry at /home/mtompset/kohaclone/C4/Charset.pm line 186.
t/db_dependent/Holds.t .. ok
All tests successful.
Files=1, Tests=38, 1 wallclock secs ( 0.01 usr 0.00 sys + 0.78 cusr 0.09 csys = 0.88 CPU)
Result: PASS
-- They are no longer in the first and fourth lines of this sample output
4) run koha QA test tool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A bug in a test case causes test case failure. It also required a
database, so I'm moving it out of the way.
Test plan:
1) prove -v t/db_dependent/Templates.t
-- bombs!
2) apply patch
3) prove -v t/db_dependent/Templates.t
-- works!
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good catch Robin, it didn't fail in Perl 5.18 so didn't notice the mistake.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the receipt in not on the whole order but only on a part of it, the
change should be done on the itemnumber linked to the "new order", the
one we are reverting.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The UT was buggy. I have just fix that in another patch on bug 12555.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8307 introduces the AcqItemSetSubfieldsWhenReceived pref.
You can now update an item field on receiving (if you create items on
ordering).
But if the receipt is cancel, there is no way to revert these changes.
This patch adds a new pref AcqItemSetSubfieldsWhenReceiptIsCancelled to
allow to revert changes previously done on receiving
Test plan:
0/ Set the AcqCreateItems to 'ordering'
1/ Fill AcqItemSetSubfieldsWhenReceived with o=1 (UNIMARC) or 7=1
(MARC21).
2/ Fill AcqItemSetSubfieldsWhenReceiptIsCancelled with o=2 (UNIMARC) or
7=2 (MARC21)
3/ Create an order with some items
4/ Receive the order and verify the notforloan value is set to 1
5/ Cancel the receipt and verify the notforloan value is set to 2
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before Bug 9811, the patron search searched on extended attributes.
This patch restore this behavior.
Test plan:
0/ Create a patron attribute PA
1/ Create a patron A (cardnumber CNA) with PA="foo"
2/ Create a patron B (cardnumber CNB) with PA="foo bar"
3/ Search for CNA should redirect on the patron detail page.
4/ Search for "foo" should display the search result with 2 results.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
'Searchable' patron attributes can now be searched for again.
Works as described, passes stests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the $facets_info calculation from the _get_facets_data_from_record
sub so it is not done for each record. It introduces a new sub, _get_facets_info
that is called from the getRecords loop, that does the job only once.
To test:
- Apply on top of the previous patches
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: _get_facets_info gets tested and it passes for both MARC21 and UNIMARC.
Facets rendering should remain unchaged on the UI.
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch refactors the facet extraction loop into a proper function.
The loop is changed so the MARC::Record objects are created only once
instead of the old/current behaviour: once for each defined facet (in
C4::Koha::getFacets).
To test:
- Apply the patch
=> SUCCESS: verify facets functionality remains unchanged.
- Run:
$ prove -v t/db_dependent/Search.t
=> SUCCESS: tests for _get_facets_data_from_record fail, because
100$a is considered for fields with indicator 1=z (field added
by IncludeSeeFromInSearches syspref).
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch sponsored by the CCSR ( http://www.ccsr.qc.ca )
This new patch builds on the work of Bug 12164 by allowing the
user to enter a new name (budget_period_description) for the
cloned budget.
A test was added to t/db_dependent/Budgets.t.
Sponsored-by: CCSR
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edit: added the sponsored-by line.
Proves GetMarcISSN returns empty ISSNs in the results array.
To reproduce:
- Run $ prove -v t/db_dependent/Biblio.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch may serve as a starting point for more unit tests in this part
of the code.
In this patch most internal subroutines of Z3950Search are covered.
In the XSLT part we reuse a XSL template from the XSLT_Handler.t test.
It needed a little tweaking for namespaces. And added the indicators on
the 990 field.
Test plan:
Run both Breeding.t and XSLT_Handler.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to choose a particular contact for
acquisitions and serials claims. To test:
1) Select a contact to use for claiming late orders and a contact
to use for claiming late issues.
2) Send a claim for a late order and a claim for a late issue.
3) Note that the claims went out to the proper people.
4) Run the unit test with:
> prove t/db_dependent/Letters.t
5) Sign off.
Note: the claim messages are recorded in the logs in the *Acquisitions*
module, not the Letters module as you might expect
This patch also fixes several perlcritic violations and centralizes
contact-related unit testing in Bookseller.t.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some vendors may have more than one contact. For example, a technical
contact and a billing contact, or a contact for journals and a contact
for monographs. Rather than require that each contact be either made
into a separate vendor or recorded somewhere outside of Koha, it would
be really useful of Koha had the ability to add multiple additional
contacts to vendors in the Acquisitions module.
To test:
1) Apply patch.
2) Edit a bookseller, making sure to add a contact.
3) View the bookseller's information, making sure the contact
information is there.
4) Run the unit test:
> prove t/db_dependent/Bookseller.t
5) Add multiple contacts to a vendor, see that they show up.
6) Delete one contact from a vendor with multiple contacts,
see that the result is correct.
7) Sign off.
Note: This test plan can supersede that on the previous two patches,
as all functionality of the previous two patches is required by this
one.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In preparation for adding the ability to handle multiple contacts, this
patch moves booksellers' contacts into their own class,
C4::Bookseller::Contact.
To test:
1) Apply patch.
2) Run database update.
3) Edit a bookseller, making sure to add a contact.
4) View the bookseller's information, making sure the contact
information is there.
5) Run the unit test:
> prove t/db_dependent/Bookseller.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
test plan:
Verify the
prove t/db_dependent/ColumnsSettings.t
returns green.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that XISBN is failing sometimes, if you run the tests a couple
of times in a row. An error 500 is raised by lwp.
This problem should be trapped and related tests skipped. Because too much
noise could make people pay no attention to this tests failing.
To reproduce:
- Run the tests several consecutive times:
$ prove -v t/db_dependent/XISBN.t
=> FAIL: XISBN test will fail eventually, printing a networking-related warning.
- Apply the patch
- Repeat the test
=> SUCCESS: when XISBN the networking/connection refused problem arises, the test
is skipped, and it still passes.
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Have a DOM setup
- Run
$ prove -v t/db_dependent/XISBN.t
=> FAIL: Can't call method "field" on an undefined value at .... C4/Search.pm ...
- Apply the patch
- Run
$ prove -v t/db_dependent/XISBN.t
=> SUCCESS: Tests pass.
- Sign off
Regards
To+
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Overdues::GetBranchcodesWithOverdueRules routine has a bug.
If a default rule *and* a specific rule exist, only the branchcode for
the specific rule is returned.
Test plan:
prove t/db_dependent/Overdues.t
and verify the unit tests are consistent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutines AddModification and ApproveModifications uses DBIx::Class instead of C4::SQLHelper.
Moreover, the tests has been wrapped in a transaction.
Test plan:
1) Apply the patch
2) Execute the unit tests by launching :
prove t/db_dependent/Koha_borrower_modifications.t
3) The result has to be a success without error or warning :
t/db_dependent/Koha_borrower_modifications.t .. ok
All tests successful.
Files=1, Tests=14, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.60 cusr 0.08 csys = 1.72 CPU)
Result: PASS
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces tests for the QueryParser PQF driver usage in Koha. Specifically its
initialization on C4::Context, and initial setup.
It also introduces a .pl script that is used to load C4::Context with different hash randomization
seeds on purpose, to verify the initialization result is deterministic and consistent between
runs.
To test:
$ prove -v t/db_dependent/QueryParser.t
It should fail because different default_search_class is set on each run, and it is not often the
one we expect.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This followup provides some unit tests for C4::Auth_with_ldap. It implements
regression tests for this bug's changes too.
The aim was to cover all use cases for checkpw_ldap from the first line up to
those touched by this bug's patches. It should serve as a start for having
unit tests for the LDAP thing.
Having said that: no excuses for not providing regression tests for LDAP from now on :-/
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
to test:
1. Apply the patch
2. Run the test, prove t/db_dependent/Koha.t
3. Check that it pass
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Run:
$ prove -v t/db_dependent/Biblio.t
=> FAIL: GetMarcISBN doesn't return the expected value for ISBN
in MARC21, NORMARC and UNIMARC
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test fails, no koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This followup removes unnecesary warnings generated by the test,
and also prints a proper message for the tests.
Added a can_ok test for all the exported functions btw.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Run `prove t/db_dependent/Auth_with_cas.t` to run the test
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutines GetContract, GetContracts, AddContract, ModContract and DelContract uses DBIx::Class instead of C4::SQLHelper
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t
3) The command has to be a success :
t/db_dependent/Contract.t .. ok
All tests successful.
Files=1, Tests=43, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.49 cusr 0.05 csys = 1.59 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct, then cancel
17) Click on "Delete this basket"
18) Click on "Contracts" (in the left menu) in order to go on aqcontract.pl, then "Delete" the created contract
19) The contract is not displayed anymore in the vendor page
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Tested on top of Bug 12493
Tests pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch are the unit tests of the previous patch
Test plan :
Same as the previous patch
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comments on previous patch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adding unit tests for the routines AddMessage, GetMessages, GetMessagesCount and DeleteMessage in t/db_dependent/Members.t
Adding unit tests for the routines GetPendingIssues and GetAllIssues in separate files : t/db_dependent/Members/GetPendingIssues.t and t/db_dependent/Members/GetAllIssues.t
The routine GetAllIssues has been modified because it does not test if the arguments was defined :
- the borrowernumber argument is required
- if the order argument is not given, it takes a value by default : 'date_due desc'
- the limit argument is optional
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Members.t t/db_dependent/Members/GetAllIssues.t t/db_dependent/Members/GetPendingIssues.t
3/ The result has to be a success without error or warning :
t/db_dependent/Members.t ................... ok
t/db_dependent/Members/GetAllIssues.t ...... ok
t/db_dependent/Members/GetPendingIssues.t .. ok
All tests successful.
Files=3, Tests=83, 5 wallclock secs ( 0.06 usr 0.01 sys + 4.68 cusr 0.26 csys = 5.01 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: perltidy on t/db_dependent/Members/*
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When I execute prove t/db_dependent/Members.t, this warning appears twice :
"Argument "Test" isn't numeric in modulus (%) at /home/yohann/koha/C4/Context.pm line 1256."
The warning is due to a invalid use of the routine set_userenv
Test plan:
1/ Execute : prove t/db_dependent/Members.t
2/ The warning appears twice :
"Argument "Test" isn't numeric in modulus (%) at /home/yohann/koha/C4/Context.pm line 1256."
3/ Apply the patch
4/ Execute : prove t/db_dependent/Members.t
5/ The result has to be a success without error or warning :
t/db_dependent/Members.t .. ok
All tests successful.
Files=1, Tests=26, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.50 cusr 0.08 csys = 1.63 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All new and old tests pass now.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass, even more now than before.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These routines were not tested
Test plan:
1/ Execute the command : prove t/db_dependent/Suggestions.t
2/ The result has to be a success without error or warning :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=89, 1 wallclock secs ( 0.05 usr 0.01 sys + 1.52 cusr 0.08 csys = 1.66 CPU)
Result: PASS
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, no koha-qa errors
But now there are 91!
prove t/db_dependent/Suggestions.t
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=91, 2 wallclock secs ( 0.05 usr 0.00 sys + 1.77 cusr 0.10 csys = 1.92 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Now, the tests used 'is' instead of 'ok', the tests are wrapped in a transaction, adding tests for the routines NewSuggestion, GetSuggestion, ModSuggestion, GetSuggestionFromBiblionumber and GetInfoFromBiblionumber.
The tests for the routines DelSuggestionsOlderThan, CountSuggestion, ConnectSuggestionAndBiblio, SearchSuggestion, GetSuggestionInfo, DelSuggestion and GetSuggestionByStatus will be arrived in another patch.
Test plan:
1/ Execute the command : prove t/db_dependent/Suggestions.t
2/ The result has to be a success without warning or error :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=32, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.49 cusr 0.08 csys = 1.61 CPU)
Result: PASS
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- refactors C4::Stats::UpdateStats (it now takes a hashref as unique parameter, instead of a list of parameters)
- add UT for it
- change the calls made to this sub in C4::Accounts and C4::Circulation
Additionnaly it also
- adds POD to C4::Stats::TotalPaid
- adds some comments to C4::Stats::TotalPaid (I think I found some errors in it)
To test :
1. run "prove t/db_dependant/Stats.t -v"
2. make some circulation operations (checkout, checkin, renew, localuse)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
3. make some fine payments operations (writeoff, payment)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
Note that there is probably an issue to fix in Accounts.pm : the user is saved instead of the branch. But this is not the purpose of this patch, so I kept the previous behavior for the moment.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work, test pass, isse/return/writeoff recorded on statistics
Removed a "=back" to make happy koha-qa
No other errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should reserve the use of dirs for namespaces. Method specific tests
should be included in a single file with subtests, or stick to Package_method.t.
This should be discussed, so we rearrange the remaining tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
DelItem should return 1 if the item has been deleted, otherwise 0.
Test plan:
Verify that t/db_dependent/Items/DelItem.t returns green
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To delete an item, only the itemnumber should be mandatory. The DelItem
routine can retrieve the biblionumber from the itemnumber.
Test plan:
Verify that t/db_dependent/Items/DelItem.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since C4::Context->dbh shares the DB handler, it's useless to pass it to
routines.
Test plan:
Try to remove an item from the Koha interface.
Verify that unit tests pass.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On closing a budget (budget period), the user will be presented with an
option to move remaining unspent funds from the previous budget to the
newly created one - adding to the amounts already entered in those
funds.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the main patch.
On closing a budget period, all unreceived orders are moved from the
old/previous fiscal year into the new fiscal year.
You can rollover funds unused in the previous fiscal year to the new
fiscal year.
This patch set is based on bug 12168 (bugfix) and can be tested on top
of bug 11578 (easier to see the fund structure).
The patch set is cut in 6 main patches:
- Move the budget period clone logic into C4::Budgets
The code is moved from the pl to Budgets.pm and unit tests are provided.
The original code should certainly be buggy since a typo existed.
- On cloning budget period, mark original budget as inactive
Cloning a budget period is already possible in Koha, this patch adds a
checkbox to mark as inactive the original budget. That avoids to edit
the budget and click the "inactive" checkbox. Both do the same action.
- On cloning budget periods, add a "reset all funds" option
Same as before, a new checkbox is added on cloning a budget period. If
you check it, all fund amounts will be set to 0. Otherwise, no change
compared to the existing behavior.
- Close a budget period (budget)
The goal of this patch set is to move unreceived orders from a budget to
another. This patch adds a C4::Budgets::MoveOrders routine which does
this job.
This action is only possible if the fund structure is the same for both
budgets, the budget_code field should be the same.
- On closing budget period, move unspent amount
Unspent amount will be move from the previous budget structure to the
new one.
- Add UI report
This patch only adds a report when closing a budget is done.
Test plan:
Wording: below, budget is a "budget period" and fund is a "budget".
Prerequisite: Having 1 active budget with some funds (with different
levels and different amounts). Order and receive some orders (not all).
1/ Go on the budgets administration page (admin/aqbudgetperiods.pl) and
duplicate the structure of this budget ("Duplicate" link in the
"Actions" column).
2/ Enter start and end date for this budget and mark the original budget
as inactive.
3/ Note that a new budget is created, with the same fund structures (and
same value) and that the old one is marked as inactive (see
admin/aqbudgets.pl page with patches from bug 11578).
4/ Try to close the new budget: it is not possible, there is no
unreceived orders for this budget.
5/ You can close the inactive budget ("Close" link in the "Actions"
column).
6/ Verify the number of "Unreceived orders" is correct and select the
new budget in the budget list. Click on the "Move remaining unspent
funds" if you want to move unspent amounts.
7/ A report view is displayed and show you the ordernumber which have
been impacted (grouped by fund).
8/ Try different configuration, depending on the selected checkboxes.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "reset all funds" (budgets).
If it is checked, the new created budgets (funds) will be reset.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "mark original budget as inactive" (budget
period).
If it is checked, the original budget will be marked as inactive.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note the typo InsertInTable "aqcudgets", note sure about the existing
behavior before this patch!
This patch adds a link "Duplicate" in the action list for budget
periods (budgets).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On testing I've found that t/db_dependent/Suggestions.t leaves
cruft on the DB. Small followup for that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before the patch:
prove t/db_dependent/Acquisition/CancelReceipt.t
returns 1 failure.
After the patch, the 2 tests pass.
Signed-off-by: marjorie barry-vila <marjorie.barry-vila@ccsr.qc.ca>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Yay! Regression tests!
The routines CheckValidBarcode and CheckIfIssuedToPatron were not tested
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Circulation/CheckValidBarcode.t t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ The result of the command has to be a success without error or warning :
t/db_dependent/Circulation/CheckValidBarcode.t ...... ok
t/db_dependent/Circulation/CheckIfIssuedToPatron.t .. ok
All tests successful.
Files=2, Tests=32, 3 wallclock secs ( 0.04 usr 0.01 sys + 2.88 cusr 0.17 csys = 3.10 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Patches squashed
Tests pass, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tests pass using sample data provided with Koha
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The module Koha::Borrower::Files.pm was not tested
To test:
1/ Execute the command: prove t/db_dependent/Borrower_Files.t
2/ The command has to print:
t/db_dependent/Borrower_Files.t .. ok
All tests successful.
Files=1, Tests=23, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.47 cusr 0.08 csys = 1.60 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Squashed patches.
Now test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The tests for the subroutines : GetMessageTransportType, EnqueueLetter, SendQueuedMessages, GetQueuedMessages, GetLetters, getletter, addalert, getalert, delalert and GetPreparedLetter of the module C4::Letters have been added.
Test plan:
1) Apply the patch
2) Execute the unit tests by launching :
prove t/db_dependent/Letters.t
3) The result has to be a success without error or warning :
t/db_dependent/Letters.t .. ok
All tests successful.
Files=1, Tests=45, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.44 cusr 0.08 csys = 1.57 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All test pass, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch includes:
- removing the use of subroutines InsertInTable, UpdateInTable, SearchInTable replaced by subroutines of DBIx::Class in the subroutines AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod and GetBudgetPeriods and admin/aqbudgetperiods.pl
- removing old database fields in OrderFromSubscription.t, Bookseller.t, Budgets.t, Serials.t, Serials_2.t
- improvement of unit tests in t/db_dependent/Budgets.t
- adaptation of calls to the subroutines AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod and GetBudgetPeriods in order to match with the use of DBIx::Class
Test plan:
1) Execute the UT of all of files wich uses AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod or GetBudgetPeriods by launching the command :
prove t/Budgets/ t/Budgets.t t/db_dependent/Budgets.t t/db_dependent/Acquisition.t t/db_dependent/Acquisition/ t/db_dependent/Bookseller.t t/db_dependent/Serials.t t/db_dependent/Serials_2.t
2) The result has to be a success :
t/Budgets/CanUserModifyBudget.t ........................... ok
t/Budgets/CanUserUseBudget.t .............................. ok
t/Budgets.t ............................................... ok
t/db_dependent/Budgets.t .................................. ok
t/db_dependent/Acquisition.t .............................. ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Bookseller.t ............................... 16/72 WARNING: GetBooksellerWithLateOrders is called with a negative value at /home/yohann/koha/C4/Bookseller.pm line 135.
t/db_dependent/Bookseller.t ............................... ok
t/db_dependent/Serials.t .................................. ok
t/db_dependent/Serials_2.t ................................ ok
All tests successful.
Files=14, Tests=571, 22 wallclock secs ( 0.17 usr 0.03 sys + 20.26 cusr 1.10 csys = 21.56 CPU)
Result: PASS
3) Go on the page admin/aqbudgetperiods.pl : Koha Administration > Budgets
4) Click on the button "New Budget" and record a new budget with a "nonzero amount" and "make budget active"
5) Click on the button "New Budget" and record another budget without "make budget active"
6) Verify there is the firt budget displayed in "Active budgets" and the second budget in "Inactive budgets"
7) Edit a budget and verify the new values are updated
8) Click on the budget active name in order to go on the page admin/aqbudgets.pl
9) Click on the button "New fund for ..." and record a new fund
10) Click on the button "Edit" then "Duplicate budget ..." in order to duplicate the budget
11) Verify there are two budgets in "Active Budgets" and one in "Inactive Budgets"
12) Click on "Funds" in the menu and verify there are two identical funds and each is associated to a different budget.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Changes to searchResults deserve unit tests.
Edit: minor tweaks:
- Remove warning in line 702
- Modernize
- License added
- "This file is a stub" removed
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The subroutines UpdateBorrowerAttribute, SearchIdMatchingAttribute, DeleteBorrowerAttribute, GetBorrowerAttributes, GetAttributes, GetBorrowerAttributeValue, SetBorrowerAttributes and CheckUniqueness of the module C4::Members::Attributes.pm were not tested.
Test plan:
1/ Execute the command: prove t/db_dependent/Members_Attributes.t
2/ The result has to be:
t/db_dependent/Members_Attributes.t .. ok
All tests successful.
Files=1, Tests=60, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.45 cusr 0.08 csys = 1.58 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test with patrons on db having issues and attributes
New test file, all test pass
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without this patch, the following warning appears:
t/db_dependent/Holds/RevertWaitingStatus.t .. Subroutine
C4::Context::userenv redefined at
t/db_dependent/Holds/RevertWaitingStatus.t line 25.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Test record has 1 single item, checked out to patron X
2) Place 3 holds for patrons A, B and C, all title level hold this time
A, B, C, item branches and staff branch are the same.
3) Return item, confirm hold
4) Confirm item is now waiting for patron A
Priorities are: A = Waiting, B = 1, C = 2
5) Open patron account of user B, checkout book
Koha asks: Item X has been waiting for patron A... Revert
waiting status
Confirm.
6) Check priorities:
Hold list shows: A = 1, C = 1
Database says: A = 1, C = 3
7) Apply this patch
8) Repeat steps 1-6
9) Note the priorities are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan correctly predicts the error and the correction made by the
patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The subroutine DelUniqueDebarment was not enough tested
To test: execute the command prove t/db_dependent/Borrower_Debarments.t
The command has to print:
t/db_dependent/Borrower_Debarments.t .. ok
All tests successful.
Files=1, Tests=31, 1 wallclock secs ( 0.03 usr 0.01 sys + 1.44 cusr 0.08 csys = 1.56 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All 31 test pass, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The use of the subroutine 'is' is prefered over the subroutine 'is'
To test: execute the commande prove t/db_dependent/Borrower_Debarments.t
To command has to print:
t/db_dependent/Borrower_Debarments.t .. ok
All tests successful.
Files=1, Tests=22, 1 wallclock secs ( 0.03 usr 0.01 sys + 1.42 cusr 0.08 csys = 1.54 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comments on last patch
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The subroutine DelUniqueDebarment was not tested
To test: execute the command prove t/db_dependent/Borrower_Debarments.t
The command has to print:
t/db_dependent/Borrower_Debarments.t .. ok
All tests successful.
Files=1, Tests=22, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.43 cusr 0.07 csys = 1.54 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comments on last patch
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some improvements on t/db_dependent/Members.t and specifically regression
tests for bug 12226
Regards
To+
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes changes in two cases to work around the fact that
Koha::Database and C4::Context were not using the same DBI database
handle.
To test:
[1] Run prove -v t/db_dependent/ILSDI_Services.t and
prove -v t/db_dependent/Items.t. Both tests
should fail.
[2] Apply the main patches and run step 1 again. This
time, both tests should pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The column maxsuspensiondays was added in the datatable but not in the tests, which caused the failure of the tests
test plan: execute prove t/db_dependent/Circulation_Issuingrule.t
The command has to print:
t/db_dependent/Circulation_Issuingrule.t .. ok
All tests successful.
Files=1, Tests=9, 2 wallclock secs ( 0.03 usr 0.01 sys + 1.35 cusr 0.08 csys = 1.47 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Failure on test before patch, success after
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds direct unit tests of the new biblionumber filter
for SearchOrders. It also moves the ordernumber filter test
to the rest of the SearchOrders tests.
To test:
[1] Verify that prove -v t/db_dependent/Acquisition.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch ensures that a patron category that is present
in the (English) sample data is used for the ILS-DI tests,
avoiding a situation where one part of AddMember was trying
to access a patron category via DBIC but failed because
it was not visible to it yet.
Note that this will become easier once C4::Context->dbh
and DBIC are using the same base DBI database handles.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Modifies showmarc and opac-showmarc to use new XSLT handler.
Removes cardview.pl as obsolete script.
Modifies C4/Record.pm and a typo in the test Record.t.
Test plan:
[1] catalogue/showmarc: Go to Cataloging. Search. Click Card.
[2] opac-showmarc: Go to opac detail, MARC view.
Open URL for plain view in new tab.
Change URL: Change viewas=html to viewas=card
[3] Verify that there are no references in the codebase to cardview.pl
[4] C4/Record.pm: Run the Record.t test in db_dependent.
This test uses marc2modsxml, triggering the change.
Additional: export to MODS from opac-detail.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Views Ok. Test pass. No more cardview. No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify if XSLT_Handler.t passes.
You could also sabotage the test by removing one of the test xsl files.
Or you could 'repair' the bad xsl file (test02). Remove the second line
redefining the xsl variable.
In all those cases the unit test should fail now.. Discard your changes :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass. No koha-qa errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the syspref.sql file to remove one of the doubled
up UNIMARCAuthrityField100 that slipped in with an earlier
patch on this bug.
Passes all tests and QA script, also t/db_dependent/Circulation_issue.t
Tested with items that had
- no notforloan value set
- notforloan value not used in updateNotforLoanStatusOnCheckin
- the notforloan value defined in UpdateNotForLoanStatusOnCheckin
Also verified it works the same, when the item was checked out or
not checked out on return.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new issuing rule: maxsuspensiondays.
A new column "Max. suspension duration (day)" appears in the main table
of the issuing rules.
If this value is filled, on returning an item, a patron won't be
suspended longer than this cap.
Test plan:
1/ Set "suspension in days" to 2.
2/ Check an item out to a patron and specify a due date to today - 10
days.
3/ Check the item in and verify the patron is suspended until today + 10
* 2 days.
4/ Remove the suspension.
5/ Set "Max. suspension duration" to 10.
6/ Check an item out to a patron and specify a due date to today - 10
days.
7/ Check the item in and verify the patron is suspended until today + 10
days.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1/ Use the usual way for ordering dates in table
2/ Add a confirmation dialog box on deleting a file
3/ Add some UTs
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
(part #1: new module w/ UT + script + template)
New feature, adds an ability to attach arbitrary files to
acquisition records (currently: to the invoices - but it can
be extended to baskets, basketgroups, budgets etc.).
Note: this code is (heavily) based on "Bug 8130 - attach PDF
files to a patron record" by Kale M Hall, main difference being
that new table (misc_files) and new module (Koha/Misc/Files.pm)
are intended to be a little more generic solution - they allow to
store and manage files associated with great many kinds of records,
from arbitrary tables.
Test plan:
1) Apply patch[es]
2) Run installer/data/mysql/updatedatabase.pl
3) Enable system preference 'AcqEnableFiles' in acquisition
4) New option 'Manage invoice files' appears in the invoice
detail page
5) Upload/view/download/delete some files for some invoices
6) Try to delete invoice with files attached (files should
get deleted as well)
7) Try to merge 2+ invoices with files attached; after merge,
all files previously attached to individual invoices being
merged should be attached to resulting invoice (merge destination)
8) prove t/db_dependent/Koha_Misc_Files.t
9) Ensure there are no regressions of any kind in invoice detail
page (acqui/invoice.pl).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
$ git grep authoritysep
This showed:
1) the updatedatabase.pl script, as expected,
2) lots of po files,
3) a test file that was missed.
TEST PLAN
---------
1) prove -v t/db_dependent/Search.t
2) Run koha QA test tools
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work (both patches). Test pass. No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
