This patch adds a new page opac-reset-password where a user cna enter their login
(userid or carndumber), current password, and new password.
If the user has a password expiration date and the current password is correct and
the new passwords match and meet requirements their password will be updated and the
expiration date reset
A patron whose password does not expire will be reidrected to login to change their password
To test:
1 - Apply patch, updatedatabase, enable new syspref EnableExpiredPasswordReset
2 - Set 'Password expiration' for a patron category
Home->Administration->Patron categories->Edit
3 - Create a new patron in this category with a userid/password set, and an email
4 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration='2022-01-01' WHERE borrowernumber=51;
5 - Give the borrower catalogue permission
6 - Attempt to log in to Straff interface
7 - Confirm you are signed out and notified that password must be reset
8 - Click 'Reset your password' link
9 - You should see the reset password page with fields for: login, current password, new password, conmfirm password
10 - enter invalid/incomplete credentials
11 - Confirm you are notified of invlaid credentials
12 - Fill in all fields, but enter current password as new password
13 - Confirm you are notified of no change
14 - Set minimum password length / strong password requirement for category
15 - Confirm you receive error if new password too short or not secure
16 - Enter a valid new password and submit and confirm update is successful
17 - Confirm you have buttons to go to OPAC or Staff and that both work
18 - Confirm you cna log in (i.e. expiration has been reset)
19 - Expire the users password
20 - Remove catalogue permission
21 - Reset password again and confirm only OPAC link
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the three scripts that fetched the soonest renewal date
to use the return from CanBookBeRenewed
To test:
1 - Set a circulation rule with a 'no renewal before' set to 3, loan length set to 5
2 - Check out an item to a patron that uses this rule
3 - Verify the checkouts for the patron show the correct 'No renewal before' date
4 - Sign in to the patron's opac account
5 - Verify the item shows it cannot be renewed, and shows the correct date
6 - Go to Circulation->Renew
7 - Attempt to renew using barcode
8 - Confirm error shows the soonest renewal date
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We got
Can't call method "value" on unblessed reference at /kohadevbox/koha/opac/opac-messaging.pl line 86
$cookie can be an arrayref, we should retrieve the session id using
CGI->cookie('CGISESSID')
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch replaces the AutoEmailOpacUser system preference with a new
AutoEmailNewUser preference. This makes the functionof the preference
clearer.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates all references to the former ACCTDETAILS notice to
use the new WELCOME email notice instead.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The error pages wrote a HTTP status code of 200 for all PSGI requests, even
though it should have only done it for PSGI requests from the ErrorDocument
middleware. This patch fixes that.
0) Do not apply patch
1) Open F12 dev tools and go to Network tab
2) Go to http://localhost:8081/files/blah
3) Note that the webpage is a 404 error but HTTP status code is 200
4) Go to http://localhost:8081/cgi-bin/koha/circ/blah
5) Note that the webpage is a 404 error and HTTP status code is 404
6) Apply patch
7) Go to http://localhost:8081/files/blah
8) Note that the webpage is a 404 error and HTTP status code is 404
9) Go to http://localhost:8081/cgi-bin/koha/circ/blah
10) Note that the webpage is a 404 error and HTTP status code is 404
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the way Koha sets cookies so that the "sameSite"
attribute is explicitly set to "Lax." This option is chosen because it
is the value which is currently assumed by browsers when the sameSite
attribute is not set.
To test, apply the patch and restart services.
- Log in to the staff interface and open your browser's developer tools.
- In Firefox, look for a "Storage" tab.
- In Chrome, look for an "Application" tab.
- Under "Cookies," click the URL of the staff interface.
- You should see all the cookies which are set for that domain.
- The CGISESSID cookie should have sameSite set to "Lax."
- Go to Cataloging -> New record.
- Check the "marcdocs" and "marctags" cookies.
- Switch to the Advanced MARC editor (you may need to enable
theEnableAdvancedCatalogingEditor preference).
- Check the "catalogue_editor" cookie.
- Add a new item to an existing bibliographic record.
- Check the "LastCreatedItem" cookie which is set after you save the
new item.
- Go to Authorities -> Authority search.
- In authority search results, click "Merge" from the "Actions" menu
next to one of the results..
- Check the "auth_to_merge" cookie.
- Go to Administration -> MARC bibliographic framework
- Choose "MARC structure" from the menu corresponding to one of the
frameworks.
- Check the "Display only used tags/subfields" checkbox.
- Check the "marctagstructure_selectdisplay" cookie.
- Go to Circulation -> Check out to a patron with checkouts.
- Check the "Always show checkouts immediately" checkbox.
- Check the "issues-table-load-immediately-circulation" cookie.
- Go to Tools -> Patron clubs. You will need at least one active club
with one or more patrons enrolled.
- From the list of clubs, click Actions -> Search to hold.
- Check the "holdforclub" cookie.
- Go to Tools -> Batch item modification and submit a batch of items.
- Uncheck one or more checkboxes in the "Show/hide columns" area.
- Check the "showColumns" cookie.
- View a patron -> Search to hold.
- Check the 'holdfor' cookie.
- With WebBasedSelfCheck enabled, log in to the self-checkout page.
- Check the "JWT" cookie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a staff member has access to the staff client (either because
'catalogue' permission is enabled or they're a superlibrarian
then that user can add items (from OPAC or staff client) to a list
marked 'Staff only'
Test plan:
1. In the staff client go to: Lists > 'New list'. Notice under 'Allow changes to contents
from' there are three options: Nobody, Owner only, Anyone seeing this
list
2. Apply first 3 patches and run updatedatabase.pl
cd installer/data/mysql
sudo koha-shell <instance>
./updatedatabase.pl
3. Restart memcached and plack
4. Create 4 patron accounts:
- User A : Superlibrarian permissions
- User B : 'Staff access, allows viewing of catalogue in staff interface
(catalogue)'
- User C : No permissions
- User D : 'Staff access, allows viewing of catalogue in staff
interface' and 'Lists' > Edit public lists (edit_public_lists)' sub-permission
5. Login to staff client as User A.
Create a public list and select the new 'Staff only' option under 'Allow changes to contents from'
6. Log into the staff client as User B.
Confirm you can add items to the list from the following staff client pages:
- Individual list page using the 'Add items' button
- Staff client search result page
- Staff client biblio detail page
7. Confirm you can remove items from the list
8. Confirm you can perform an OPAC search when not logged in
9. Log into the OPAC as User B. Confirm you can add items to the list
from the following OPAC pages:
- OPAC search result page
- OPAC biblio detail page
10. Log into the OPAC as User C. Do an OPAC search and confirm you
can view the list, but not add items to it
11. Login to the staff client as User B. Create a new list with the
following settings:
- 'Category'='Private',
- 'Allow changes to contents from'='Staff only'
Notice a red hint message is displayed.
Change 'Category'='Public' and notice the hint is removed
12. Log into the OPAC as User C. Notice the 'Staff only' option is not
available when creating a list
13. Log into the OPAC as User B. Repeat step 11. Confirm the same
outcome
14. Log into the staff client as User A. Create a list with the
following settings:
- Public = 'Public'
- Allow changes to contents from = 'owner only'
15. Log into the staff client as User D. Edit the list from step 14
confirm you can edit the list to have 'Allow changes to contents from' =
'Staff only'
16. Run Patron.t and Virtualshelves.t unit tests:
sudo koha-shell <instance>
prove t/db_dependent/Koha/Patron.t
prove t/db_dependent/Virtualshelves.t
Sponsored-by: Horowhenua District Council, New Zealand
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new system preference, OpacAdvancedSearchTypes, as an
OPAC-specific version of the AdvancedSearchTypes preference. Values from
AdvancedSearchTypes are copied to OpacAdvancedSearchTypes so that
behavior is consistent.
The patch also alters the output of the "Most popular" page so that:
1. The page heading is correct ("Most popular titles" instead of "Top
issues").
2. The table show both item type and collection whether or not the user
has submitted query with one of those fields as a filter.
To test, apply the patch and run the database update process.
- Go to Administration -> System preferences.
- Search for AdvancedSearchTypes. You should get two results, one for
the OPAC preference and one for the staff interface.
- Check that the OpacAdvancedSearchTypes settings match the
AdvancedSearchTypes settings.
- View the advanced search pages in the staff interface and OPAC to
confirm that the tabs look correct.
- Change the OpacAdvancedSearchTypes and AdvancedSearchTypes settings to
be different and confirm that each is applied separately to each
interface.
- Enable the OpacTopissue system preference.
- View the "Most popular" page in the OPAC.
- The page heading should be correct.
- The OpacAdvancedSearchTypes settings should be reflected in the
"Refine your search" sidebar: If "Collection" is checked, a filter
for collection should appear. If "Item types" is checked, a filter
for item types should appear.
- The output of your search should include collection and item type
regardless of what filters you've submitted.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some discovery tools can't translate ISL-DI results, it would be useful
if we can get ISL-DI output already translate.
This patch add an optional parameter language to GetAvailability, and
make GetAvailability results translatable.
If no parameter is given the output language is the language of the
cookies is present or the first language in the opac language list.
Test plan:
1. Enable the ILS-DI system preference
2. Locate a record
3. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice.)
4. Apply the patch
5. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio&language=[LANGUAGE]
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item&language=[LANGUAGE]
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice, [LANGUAGE] is a language code ex: 'en' or 'fr-FR')
6. The results should now be in the requested langugage
Sponsored-by: University Lyon 3
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are 2 prefs that control the default view of biblio detail pages:
IntranetBiblioDefaultView for staff and BiblioDefaultView for OPAC.
There are as well viewISBD, viewLabeledMARC and viewMARC to allow/don't
allow access to those page for staff members.
This code need to be in a single place to avoid discrepancy.
Test plan:
Play with BiblioDefaultView and IntranetBiblioDefaultView and confirm
that the links of biblio point to the correct view.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The self registration form stores a new borrower as a borrower modification when verifying by email.
Borrower modifications can handle extended attributes.
This patch simply sotres the extended attributes in the modifications table, and approves a modification
to the extended attributes only after patron is created
To test:
1 - Apply patch
2 - Create a patron attribute and set it as viewable/editable in the OPAC
3 - Set system preference PatronSelfRegistrationVerifyByEmail
4 - Reigster a new patron on the OPAC, provide an email and populate the extended attribute
5 - Retrieve the verification token, the last on in the messages table
SELECT * FROM message_queue;
6 - Go tot he url from above
7 - Confirm successful patron creation
8 - View patron record and confirm attribute was set
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This alters the svc scripts to set the report id after fetchign the report object
to ensure it is passed to exectue query
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The last run of a report is updated only if method execute_query() is
called with report_id.
This whas missing for :
- when report is run publicly
- when report is sent by email
- when report is exported
Patch changes the method signature to use a hash of params, in order to
easily avoid some params.
Test plan :
1) Create a report.
2) Run report.
3) Check the report listing. Confirm that the last run info on the report is updated.
4) Make report public.
5) Run report via public url.
6) Check the report listing. Confirm that the last run info on the report IS NOT updated.
7) Schedule the report to run at a given time and e-mailed to an address.
8) After the report runs at the scheduled time, check the report listing. Confirm that the last run info on the report IS NOT updated.
9) Run report.
10) Export results.
11) Check the report listing. Confirm that the last run info on the report IS NOT updated AT THE TIME OF THE EXPORT.
Questionable (I don't know if this is addressed):
12) Run report on backend through a cron job and send results via e-mail.
13) Check the report listing. Confirm that the last run info on the report IS NOT updated.
14) Apply patch.
15) Rerun steps 2-13. Confirm that steps 3, 6, 8, 11, and 13 DO UPDATE the last run info.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Trivial fix.
Test plan:
Delete two lines from opac search history.
Verify results. Check plack-opac-error.log.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This is a follow-up patch for bug 29543. If an invalid cardnumber has
been used we should not generate a token.
Test Plan:
1. Set SelfCheckoutByLogin to 'cardnumber'.
2. Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
3. Enter an invalid carnumber like 'thisisabadcardnumber'
4. See the appropriate message "Sorry The userid thisisabadcardnumber was not found in the database. Please try again."
5. Try again with a different cardnumber and notice the same exact error message including the 'thisisabadcardnumber' cardnumber.
6. Apply this patch
7. Restart all the things!
8. Repeat steps 2-4
9. Try again with a different cardnumber, you should now see the correct
cardnumber!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ACCTDETAILS notice trigger to the opac self
registration process. Allowing new users, with varification enabled,
to receive the ACCTDETAILS notice immediately after their account is
varified.
Test plan
1) Enable AutoEmailOpacUser system preference
2) Ensure the ACCTDETAILS notice is configured
3) Ensure `PatronSelfRegistrationVerifyByEmail` is enabled
4) Register a new user via the opac self registration process using an
email address you have access to
5) Verify the user by following the link in the verification email you
should have received.
6) The new user should have been created and you should be able to see
the account details notice in their associated notices
7) Confirm that the email address used above has received the notice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ACCTDETAILS notice trigger to the opac self
registration process. Allowing new users, without varification enabled,
to receive the ACCTDETAILS notice immediately after their account is
created.
Test plan
1) Enable AutoEmailOpacUser system preference
2) Ensure the ACCTDETAILS notice is configured
3) Ensure `PatronSelfRegistrationVerifyByEmail` is disabled
4) Register a new user via the opac self registration process using an
email address you have access to
5) The new user should have been created and you should be able to see
the account details notice in their associated notices
6) Confirm that the email address used above has received the notice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Although less harmful indeed. No borrowernumber, no image.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested: logged in, logged out, prefs toggled. All fine.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the different ->recalls accessors implemented on this
bug be more standard. This means:
- They don't do special things like default sorting or stripping out
special parameters. That's all left to the caller and the methods are
clean: they just return the related objects
- Useful filtering methods for Koha::Recalls resultsets are added. The
only used one (in the end) was ->filter_by_current. It seems like a
better approach, because it gives devs more control on how they want
to chain things, and there's a single place in which to maintain the
criteria of what is 'current' or 'finished'. This clearly makes the
'old' column obsolete IMHO, at least in the use cases I found. This is
covered by tests as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Due to the wantarray change, we should fix this call in list context.
We should either use an iterator now or append as_list.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
And making reverted ajax message clearer
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- removing authnotrequired flag from scripts
- fixing opac buttons
- chmod +x for recalls test files
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- place a biblio-level or item-level recall via the biblio detail page, OPAC search results, or course reserves
- view or cancel your active recalls from 'your summary' recalls tab
- view all active and inactive (and cancel active) recalls from 'your recall history'
- stopped from placing a reserve on an item that the patron has already recalled
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On the ktd sample database when trying to go to the detail page from the result list:
Undefined subroutine &CGI::Compile::ROOT::kohadevbox_koha_opac_opac_2ddetail_2epl::searchResults called at /kohadevbox/koha/opac/opac-detail.pl line 260
Turning off OpacBrowseResults makes the error disappear.
In opac-detail.pl, use C4::Search is missing searchResults and getRecords
To test:
- Search for something that gives several result pages in OPAC, example: e
- Switch to one of the last pages using link on top of results, example: 10
- Open any of the records listed in detail view
- Verify that the error is shown
- Apply patch and repeat, error is gone and browsing behaves as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The method Koha::AuthorisedValues->authorised_value is not covered by tests!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a 'holdable' and 'unholdable' class to the rows of the table
Additionally I rename the 'backgroundcolor' field to 'onloan' as that is what it contains.
Note: Out of the box, there is no css associated with this class
I add a div around the table to allow hiding the new buttons as well when optiuons are hidden
It would be nice in the future to utilise a Koha table here, however, it is complicated by multi-holds
To test:
1 - Add a number of items to a record, ensuring they belong to different libraries
2 - Set 'Default checkout, hold and return policy'->'Hold policy' to 'From home library'
3 - Sign in to opac and attempt to placehold on the record
4 - Click 'show more options' and 'a specificitem'
5 - Note holds table includes items that cannot be held
6 - Apply patch
7 - Reload holds page
8 - Note items that cannot be heldare hidden
9 - Click 'Show unholdable items' and note they appear
10 - Click 'Hide unholdable items' and veriofy they hide
11 - Test with multi holds
Signed-off-by: The Minh Luong <the-minh.luong@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 29844 forgot to add as_list to opac-search.pl.
You can see it changed search.pl
Patch fixes and also adds explicit interface = opac in get_search_groups() call.
Since intranet is explicit, opac should also be.
We keep opac as default value.
Test plan :
1) Create a libary group for OPAC and one for staff
2) Go to OPAC advanced search page
3) Check you see the OPAC libary group
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the opac/opac-privacy.pl OPAC page use the new
anonymize method.
To test:
1. Have some checked-in materiales
2. Have OPACPrivacy enabled
3. Notice your checkouts history contains what you expect
4. Go to 'your privacy'
5. Click on 'Delete checkout history'
=> SUCCESS: It works, no crash.
6. Sign off :-D
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The same way we have a button to immediately delete the checkouts history in the OPAC, we should have a similar option for the holds history.
This patch implements that.
To test:
1. Have a patron with some old checkouts and old holds.
2. Have OPACPrivacy, OPACHoldsHistory and opacreadinghistory enabled.
3. Notice in the OPAC the patron has some old checkouts and holds.
4. Use the Privacy tab to clean checkouts
=> SUCCESS: They are still cleaned as before this patch
5. Try to clean the old holds
=> SUCCESS: They are cleaned!
6. Add some old checkouts and holds
7. Use the new 'All' button
=> SUCCESS: All cleaned
8. Sign off :-D
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Logout in OPAC.
Goto sco help page.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Certainly since bug 29543 and bug 29914.
We should do the same authentication check than sco-main.pl, and also
make sure to generate the checkout history only for the logged in patron
(the OPAC one, not staff member)
Test plan:
Use the different combinations of the SCO config (AutoSelfCheckAllowed,
SelfCheckoutByLogin and WebBasedSelfCheck) and confirm that this patch
fixes the SCO print slip feature.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I think this is a better approach for the same thing. Posting it just in
case it helps.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We must check if logged in user is trying to modify one of their
checkouts
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Checkin or renew must be restricted to the items they own.
Test plan:
Create an item with barcode bc_1
Check it in to user A
Login to SCO with user B
Get the token using the browser dev tool, from the cookie
Hit (replace $JWT)
/cgi-bin/koha/sco/sco-main.pl?jwt=$JWT&op=renew&barcode=bc_1
/cgi-bin/koha/sco/sco-main.pl?jwt=$JWT&op=returnbook&barcode=bc_1
You should see an error message
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The self-checkout feature is assuming a patron is logged in if patronid
is passed. It also assumes that "We're in a controlled environment; we
trust the user", which is terribly wrong!
This patch is suggesting to generate a JSON Web Token (JWT) to store in
a cookie and only allow action (renew, check in/out) is the token is
valid. The token is only generated once the user has been authenticated
And is removed when the user finish the session/logout.
Test plan:
You must know exactly how the self-checkout feature works to test this patch.
The 4 following sysprefs must be tested:
SelfCheckoutByLogin, AutoSelfCheckAllowed, AutoSelfCheckID, AutoSelfCheckPass
Confirm that you can renew, checkin for the items you own, and checkout new items.
Confirm that you are not allowed to access other account's info.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It's not used in template
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It's not needed, we have $patron
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Most of the changes here are simple, this can be read to view the changes
Testing that holds can be placed via staff client, and opac, and are disallowed
when expected is the best test plan, beyond running the unit tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the call to overdrive_proxy to allow passing a version
and updates the code to use V2 for availability
To test:
1 - Enable OverDrive integration by setting the sysprefs
2 - Log in to your overdrive account in the Koha opac
3 - Perform a search and note availability display
4 - Confirm you can checkout/hold/return books
5 - Apply patch
6 - Repeat search and test functionality
7 - Note that title with '0 out of 0 copies available' now say 'Currently unavailable'
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds public note to the table of information shown about
items when placing a hold on a specific item in the OPAC.
To test, apply the patch and check Administration -> Circulation and
fine rules. You should have at least one patron category/item type
configured to allow OPAC item level holds.
- Modify an item to add information to the "Public note" field.
- Locate that record in the OPAC and place a hold on it.
- On the "Placing hold" page, click "Show more options" and "A specific
item."
- In the table of items you should see a "Notes" column showing the
information you added to the item.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch:
- Adds a notice about the fee to be charged to the patron (staff and
OPAC)
- Adds the right UI description for ARTICLE_REQUEST_FEE debit types in
the UI.
To test:
1. Have some article request fee rules
2. Play with placing an article request in OPAC and staff
=> SUCCESS: You see a message about the fee
=> SUCCESS: The fees are correctly applied to the patron
3. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The expiration date picked by the patron (or librarian) when placing a
hold is lost when a waiting hold is reverted.
We need a separate DB field to store this value and restore it when
needed: patron_expiration_date
The new behaviours are now:
Create a hold and specify an expiration date:
expirationdate=patron_expiration_date
Fill the hold:
expiration_date is calculated
expiration_date set to the calculated value or to
patron_expiration_date if anterior
patron_expiration_date not modified
Revert the waiting status:
expirationdate set back to patron_expiration_date
Cancel expire reserves:
if < expirationdate OR < patron_expiration_date
Note: This change should not be needed but won't hurt
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Florian Bontemps <florian.bontemps@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the checkout_download_url routine in
WebSerivce::ILS::OverDrive::Patron
We now directly hit the fulfillment endpoint with redirects disabled
and fetch the URL
The overdrive.js is modified to use a single 'Get item' button for all
checked out items and to refer to the fulfillment page
To test:
1 - Enable all OverDrive system preferences
2 - Search on opac and confirm OD results returned
3 - Checkout an item
4 - Confirm you have the new 'Get item' button on 'OverDrive account'
tab on opac-user.pl
5 - Confirm the 'Get item' button works
NOTE:
Most items will also show the 'Get item' button in results, however,
magazines may not as each checkout has a unique 'reserve id' and the
'parent' id is not checked in our current code
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We should not explode if the biblionumber passed in not in DB.
Test plan:
Hit /cgi-bin/koha/opac-reserve.pl?biblionumber=42424
and notice the error message.
Without this patch you got
Can't call method "holds" on an undefined value at
/kohadevbox/koha/opac/opac-reserve.pl line 172
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The crash is a result of a not found borrower. This is typically
a bad or repeated recovery attempt.
Test plan:
Do a password recovery.
Use the mailed URL twice.
Without this patch, the second attempt crashes.
With this patch, the second attempt shows an error dialog.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See bug 24185, this avoids looping every each item of the record for every item of the record
How to reproduce:
1) on freshly installed kohadevbox create/import one book,
remember that biblionumber for later use it in down below,
2) add 100 items for that book for some library,
3) find some patron, that patron's card number we will
use as a borrower down below to open holds page,
4) check for the rule or set up a single circulation rule
in admin "/cgi-bin/koha/admin/smart-rules.pl",
that rule should match above book items/library/patron,
check that rule to have a non-zero number of holds (total, daily, count) allowed,
and, IMPORTANT: set up "On shelf holds allowed" to "If all unavailable",
("item level holds" doesn't matter).
5) open "Home > Catalog > THAT_BOOK > Place a hold on THAT_BOOK" page
("holds" tab), and enter patron code in the search field,
or you can create a direct link by yourself, for example, in my case it was:
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=23529000686353
6) it should be pretty long page generation time on old code, densely increasing for every hundred items added. In the case of this solution, it's fast, and time increases a little only, linear.
In testing with 100 books I went from ~6.5 seconds to ~3.2 seconds
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch builds on the change introduced by Bug 22844, changing the
selection mode for the OPACSuggestionMandatoryFields and
OPACSuggestionUnwantedFields preferences to a modal.
This patch includes a database update for converting the format of the
saved values in these preferences. Previously the suggestions table
fields would be separated by a comma. Now they should be separated by a
pipe.
To test, apply the patch run the database update.
- Go to Administration -> System preferences.
- Search for 'OPACSuggestion.'
- The input fields for OPACSuggestionUnwantedFields and
OPACSuggestionMandatoryFields should appear as "locked" (read-only)
inputs.
- Clicking either input field should trigger a modal window with
checkboxes for each available column in the suggestions table.
- Test that the "select all" and "clear all" links work correctly.
- Test that the "cancel" link closes the modal without saving your
selections.
- Test that the "Save" button closes the modal, copies your
selections to the form field, and triggers the preference-saving
function.
- Test that changes to both preferences are correctly reflected in the
OPAC suggestion form.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Caused by
commit 586bed1319
Bug 28941: Filter suggestion inputs at the OPAC
We are loosing the link with the biblio (suggestion.biblionumber)
Test plan:
At the OPAC, go to the detail page of a bibliographic record, click
"Suggest for purchase" and submit the form.
Without this patch the suggestion is created but the link to the
bibliographic record is lost
With this patch applied you should see that suggestions.biblionumber has
correctly been preserved
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Wrong key 'xsl_filename' is present in opac-tags.pl and shelves.pl
(the only places where it is used in the code even) instead of
'xsl_syspref' that is actually used and this is the cause of those
warnings.
Also added honeypot to check if other calls in same way happens.
Honeypot probably not needed, review when QA in the Community.
To reproduce (shelves.pl):
1) Prepare some test list with items or use existing one.
2) Go to the lists page (koha/virtualshelves/shelves.pl),
notice multitude of new warnings in the "intranet-error.log" log file
that mostly have to do with "Use of uninitialized value $xslsyspref".
3) Apply the patch.
4) Go back to same page and check it again, warns like that should not
appear in the log file anymore.
To reproduce (opac-tags.pl):
1) Go to the "my tags" page in OPAC and open "tag cloud".
2) Notice a bunch of new warnings in the log file that mostly have to
do with "Use of uninitialized value $xslsyspref".
3) Apply the patch.
4) Reload the page and check the log file again.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Applies to opac and intranet script.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Minimal fix to improve bad indentation a bit, moving to 2 spaces.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We are adding (or already doing) a Koha::Biblios->find, so we should
get rid of GetBiblioData, fetching the same data.
It returned a few extra columns, but unused here:
$dat->{bnotes}, $dat->{bi_notforloan}
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There's no way to use 'no' XSLT now, so don't need to use this to show
authors on the detail page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves C4::Biblio::GetMarcAuthors to
Koha::Biblio->get_authors_from_MARC. This is so the method can be
used in templates and notices.
To test:
1. Find a record that has an author in the added entry field (700-720).
2. Add the record to the cart and a list.
3. View your cart and click 'more details'. Confirm authors show as
normal.
4. Click 'send' and confirm the email sent shows the authors as normal.
5. Go to the list you added the record to and click 'send list'. Confirm
the email sent shows the authors as normal.
xslt)
6. Log in to the OPAC. Find the record and add it to the cart and a list
7. View the cart and click 'more details'. Confirm authors show as
normal.
8. Click 'send' and confirm the email sent shows the authors as normal.
9. Go to the list you added the record to and click 'send list'.
Confirm the email sent shows the authors as normal.
10. Confirm tests pass:
- t/Biblio.t
- t/db_dependent/Koha/Biblio.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
TEST PLAN:
1. Apply patch, updatedatabase, restart_all
2. In the PatronSelfRegistrationBorrowerMandatoryField add the field password.
3. Go to the self registration page on make sure password is required.
4. Now go to the OPAC modification page, make some changes and attempt to submit. It should work.
5. Go to PatronSelfModificationMandatoryField and select some fields.
6. The columns you selected should now be required.
7. On the PatronSelfModificationMandatoryField page, make sure the select all and clear all buttons work.
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We dropped it on bug 12561 when removing the non-XSLT view. This feature
has never been implemented for XSLT views and the pref must then be
removed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This reads better when converted to regular if.
Note that last within such a block is allowed in Perl, but it feels
better to use it only in a loop context.
Test plan:
Read the patch ;)
Bonus: Test if you enter the block by using pref OPACSuggestionMandatoryFields
when adding a suggestion from opac.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: Added a space between 'if' and '(' :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The OPAC authority details page is broken when the 'AuthDisplayHierarchy'
System Preference is set to 'Enable',
This patch fixes that.
Test plan:
1) Set AuthDisplayHierarchy to 'Enable' and try to view the details
page of an authority in the OPAC -- the page is broken.
2) Apply this patch.
3) Refresh the page; this time the authority details are displayed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From commit 586bed1319
Bug 28941: Filter suggestion inputs at the OPAC
But later in the script we send { suggestion => %$suggestion } to the
template and so erase the variable previously passed.
Test plan:
Login at the OPAC
Go to the bibliographic detail page
Suggest for purchase
=> The form must be prefilled!
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. Add some news that should display on opac-readingrecord.pl. For example: opacheader, OpacCustomSearch, opaccredits
2. Go to opac-readingrecord.pl, the news doesn't display
3. Apply patch, restart_all
4. Go to opac-readingrecord.pl, the news displays
5. Turn on 'opacreadinghistory' and test to make sure it still works
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It is a confusing name because we have 'Article Request' as a feature,
and this does not follow Koha terminology.
Test plan:
`updatedatabase` and confirm that the syspref has been renamed
`git grep RequestOnOpac` => No occurrence in the code
QA: The syspref's value is always retrieved using Koha.Preference from
.tt files, we don't need to send it from controllers or C4::Auth
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to set a library as 'public' or not; this
allows librarians to hide back office library branches from the opac.
Test plan
1/ Set a library as public from `admin > libraries`.
2/ Navigate to the `Libraries` page in the OPAC
3/ Note that only `public` libraries are displayed.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that without the use URI::QueryParam statement in C4::Auth we get:
Can't locate object method "query_param_delete" via package "URI::_generic" at /kohadevbox/koha/C4/Auth.pm line 1254
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- There are CAS demo servers, pick one [1]
- They all seem to have the same user/pass as of writing this:
User: casuser
Password: Mellon
To test:
1. Enable CAS and all related preferences. I chose v3 or higher, it only affects the logout action.
2. Set the CAS URL: https://casserver.herokuapp.com/cas (note that if you click on any of the examples, they include a trailing /login, don't put it).
3. Generate a Koha user, with userid: casuser (I also used that for cardnumber, just in case). Set no password to the user, or its irrelevant anyway. Add it stff permissions.
4. Open your Koha OPAC, I use KTD thus:
http://kohadev.myDNSname.org:8080
5. Try to login using CAS
=> SUCCESS: You are redirected to the right login page
6. Login using casuser/Mellon as advertised in the 'demos' site.
=> SUCCESS: You are logged in!
7. Now logout
=> SUCCESS: You are sent to CAS so they know you wanted to logout (if you enabled CAS logout)
8. Repeat on the staff interface.
=> SUCCESS: Things work!
9. Apply this patches, restart all the things:
$ restart_all
10. Repeat all in OPAC and admin interfaces
=> SUCCESS: Things work!
11. Sign off :-D
[1] https://apereo.github.io/cas/Demos.html
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset moves the 'category' attribute for virtual shelves, that
takes values of 1 and 2 (private and public respectively) into a boolean
for public.
The DBRev is trivial, and the changes to the code are as well.
To test:
1. have some known public and private lists
2. Apply this patches
3. Run:
$ updatedatabase
=> SUCCESS: Public lists have public=1, private have public=0
4. Run:
$ kshell
k$ prove t/db_dependent/Utils/Datatables_Virtualshelves.t \
t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass!
5. Try the feature in staff and OPAC
=> SUCCESS: All good
6. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This removes the 'edit_borrowers' permission from OverDrive search
To test:
1 - Enable OverDrive via koha system preferences
2 - Sign in to opac with a user with no permissions
3 - Perform a search that will return OD results, 'love' works
4 - Click thje "Found XX results in the library's OverDrive collection"
5 - Note you are logged out of Koha
6 - Apply patch
7 - Repeat
8 - Success
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the functional fixes introduced in bug 29284 and
also prevents the 'Show analytics' link from displaying when no
component parts are found and inline display is enabled.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Fixed error with $err vs $error(s) :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We were fetching components in the first call of XSLTParse4Display
(opac-detail around L220). And again (opac-detail around L660).
Same for catalogue/detail.pl.
Moving the XSLT block in both scripts and removing the code from
XSLT.pm which again makes the tests obsolete.
Not hiding the link when there are components. Might be helpful too.
Also fixing biblionumber in the XSLTParse4Display call for parts.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the link to 'more results' should you exceed the
hard coded limit of 300 component parts.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the default details tab selection to components for
the case when there are no holdings attached to the record and there is
no HTML5 content to display in preference.
Bug 11175: (QA follow-up) OPAC - Display components tab if no holdings
As for the staff client, this selects the default tab to be 'Components'
for the case where no holdings are found.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Thanks to a comment from Andrew, I discovered that the return from
simple_search_compat actually differs depending on if you are using
ElasticSearch or Zebra. The 'results' arrayref contains MARC::Record
objects for ES and raw marc strings if you are using Zebra. This is
actually already dealt with in the misnamed new_record_from_zebra
function inside C4::Search.. so this patch simply replaces our
MARC::Record instantiation code with a call to that function.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the display so that rather than displaying the
components using the main XSLT and then using CSS to move them into a
box on the right side for display, which causes issues with RTL records;
We instead add them in a new tab beneath the rest of the record details
alongside holdings and other details.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Bug 11175: (QA follow-up) Fixes for bug 12561
Bug 12561 changed the prototype for XSLTParse4Display so this patcha
accounts for the additional calls to that method introduced in this
patchset.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We can simplify the code introduced by bug 15851 by moving the
'show_analytics_link' variable assignment into C4::XSLT and thus making
the code more DRY.
Taking the code in bug 15851 as inspiration this patch also adds proper
handling for UseControlNumber vs EasyAnalytics style 773 linking and
ensures we only return analytic component parts and no other records
containing 773's.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an eval around the call to search for analytic records
It pases a value to the template on the staff side, but logs the warning on
the opac
This seems similar to 'decoding_error' which is noted on staff side, but absent on OPAC
The eval follows the patter used during searching
To test:
1 - Add a title to catalog, with 245a:
Digger does it all (not really!)
2 - Set searchEngine preference to: Elasticsearch
3 - The record does not load
4 - Apply patch
5 - The record loads, there is a note about analytics at the top fo the record
6 - View record in opac, no note
7 - Check logs on intranet and opac, searching error is logged
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is based on Julian's idea on bug 28026 where we could get rid of call_recursive by passing refs as arguments to call.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Plugins/Plugins.t
3) prove t/db_dependent/Koha/Plugins/Barcode_transform_hooks.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It's not used.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch makes check_cookie_auth return the session instead of
$sessionID, so we are adjusting the different calls to prevent
confusion.
However they are mainly used to check the authentication status and
don't care about this second variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Show the TOC checkbox on OPAC and staff.
Test plan:
Add new article request on OPAC or staff. Tick checkbox.
Verify if TOC is Yes on opac-user or staff patron details.
Check the list view on circ/article-requests.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It has been missed on bug 17600.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adjusted commit title.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes Koha::Patron->article_requests use the underlying DBIC
relationship and _new_from_dbic instead of a plain search. It also
refactors 'article_requests_current' and 'article_requests_finished' to
use ->article_requests, as well as the new methods introduced by bug
29082 for filtering.
No behavior change should take place.
To test:
1. Apply the unit tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron.t \
t/db_dependent/ArticleRequests.t
=> SUCCESS: Tests pass!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Unit tests
This patch adds missing tests for Koha::Patron->article_requests and
moves (and extends) tests for 'article_requests_current' and
'article_requests_finished' that were originally in ArticleRequests.t
into Koha/Patron.t as we now do.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/ArticleRequests.t \
t/db_dependent/Koha/Patron.t
=> SUCCESS: Tests pass!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: (QA follow-up) Remove unused param
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Fix OPAC listing of article requests
This patch makes the OPAC template reuse a precalculated value for the
active article requests for the patron (and its count).
The original code relied on the methods returning a list, which is not
the case for _new_from_dbic until bug 28883 is pushed.
This patch fixes that.
Note: there was an odd behavior when ArticleRequests was enabled but no
active article requests were present: the tab wasn't rendered but the
'empty table' with the 'You have no article requests currently.' message
was displayed below the Checkouts tab. I'm not sure that was caused by
this patches, or other. Fixed on this patch.
To test:
1. In the OPAC, go to 'your summary'
=> FAIL: Things don't show for article requests
2. Add some article requests and repeat 1
=> FAIL: Something's wrong there
3. Apply this patch and repeat 1
=> Yes! Things show correctly!
4. Cancel all your article requests
=> SUCCESS: Things render as they should
5. Re-enter the 'your summary' page (to force re-rendering)
=> SUCCESS: Things render correctly for empty article requests
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Remove article_requests_finished and article_requests_current
This patch removes those methods that are not really needed. Templates
are adjusted to use the expected combination of
->article_requests->filter_by_current.
To test:
1. Apply this patch
2. Visit a patron with article requests
=> SUCCESS: All works
3. Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron.t
=> SUCCESS: Tests pass, less tests.
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/download/v1.0.1/koha-plugin-barcode-transformer-v1.0.1.kpz
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the patron search and anywhere else you can scan a patron
cardnumber, type in some cardnumbers but prefix them with A and postfix
them with A or B, e.g. A12345A, A12345B
5) Note the letters are removed by Koha!
6) Try a cardnumber like X123456Y
7) Note Koha converts it to Z13456Z
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the item barcode field on the checkin and checkout pages,
and anywhere else you can scan an item barcode, type in some
valid barcodes, but prefix them with X and postfix them with
Y, e.g. X123456Y
5) Note the letters are removed by Koha!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix QA script issue
* Fixes issue with barcode generate stub so perlcritic is happy
* Removes extra semicolon from return call in configure method
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Remove unused method barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Rename barcode_transform to item_barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Barcodes inputted into Koha should always pass though barcodedecode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Catch one last case of itemBarcodeInputFilter
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix Checkouts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Use call_recursive() as a replacement for call()
The method `call()` is not sufficient for barcode transformations. It's
possible that more than one barcode transformation plugin will be
installed. The `call_recursive()` method takes the output of the first
plugin and uses it as the input for the next plugin and so on. This allowes
each plugin to see the current version of the barcode and modify it if
necessary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Fix t/db_dependent/Koha/Plugins/Circulation_hooks.t
Bug 26351: Revert improper change to unit test, fix number of tests
Bug 26351: Remove uneeded use Koha::Plugins statements
Left over from previous changes
Bug 26351: Add missing barcodedecode import
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds better error handling and reporting when placing an
article request fails. It also makes the error messages translatable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes it possible to limit article requests per patron per day.
To test:
1. Apply patches
2. updatedatabase
3. Enable ArticleRequests preference
4. Edit a patron category and set an article request limit to 1
CHECK => if you set the limit to anything else but a positive number or empty string, a warning appears
5. In staff search biblios and request an article for a patron of the modified category
6. Repeat step 5
SUCCESS => if limit is reached, when you select the user to request an article a warning appears saying that the limit was reached
7. Repeat steps 5 and 6 but this time in opac
SUCCESS => Patron is not allowed to request another article if limit is reached
8. prove t/db_dependent/ArticleRequests.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Edit: This patchset originally changed the 'categories' table structure
and relied on that for limit calculation. I removed all that code and
squashed into this one, as we moved everything to the circulation_rules
table.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Remove fields from OPACSuggestionUnwantedFields before creating the
suggestion
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD amended patch: remove useless sort
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The following sequence is bad:
46 my $suggestion = $input->Vars;
181 &NewSuggestion($suggestion);
All columns can be set when we insert the suggestion into the DB
We definitely want to avoid the following fields to be set by the final
user: acceptedby, accepteddate, STATUS, etc...
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch prevents an existing user from exploiting the patron edit form in order to
force create new patrons
To test:
Try all combinations of PatronSelfRegistration and PatronSelfRegistrationVerifyByEmail
with and without this patch.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Security patch. Follow-up for 28929.
Including correction for gonenoaddress and two others.
Includes unwanted fields too now.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
* selfreg and selfmod for OPAC
* patron's edition on staff
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested OPAC and staff side. Prevents mangling flags column.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To ease testing and future changes if needed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Create a library group as an OPAC search group
2 - Enable OpacAddMastheadLibraryPulldown
3 - Browse to:
http://localhost:8080/cgi-bin/koha/opac-search.pl?idx=&q=t&branch_group_limit=multibranchlimit-1&weight_search=1
4 - Confirm search works and returns correct results
5 - Confirm dropdown is correctly populated
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the code from the search scripts into QueryBuilder
modules.
To test:
1 - Have a library group defined as a search group for both staff and opac
2 - Search on staff client and opac with that group limit and a single branch limit
3 - Note your results/counts
4 - Note the visuals of the search description
5 - Apply patch
6 - Repeat searches
7 - All should work as before
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If a record is deleted from Koha, but is for some reason not deleted from the search indexes, OpacBrowseResults can cause an ISE if the deleted record is in the search results for any given item. OpacBrowseResults loops through the search results, and checks if there is a biblionumber, but does *not* check to see if a result was pulled from the database for that biblionumber. It simply assumes the result must exist.
We should be checking to ensure the biblionumber was valid before operating on the biblio object.
Test Plan:
1) Use zebra for searching
2) Disable koha-indexer
3) Enable OpacBrowseResults
4) Perform a search
5) Delete an item in the search results
6) View on of the remaining items in the search results
7) Note the error
8) Apply this patch
9) Restart plack
10) Reload the page
11) The error should be gone!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
RSS feeds are now generated using opac/opac-search.pl (format=rss).
But prior to
commit 09df0de35f
Removing obsolete RSS <link> tags and the scripts
it was using opac/opac-rss.pl, which used opac/rss
The directory should have been removed by this commit.
Test plan:
Confirm that this directory is useless and can be removed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The ISBD view in the OPAC interface does not display item information.
This patch fixes that.
Test plan:
0) Have a biblio with at least one item attached to it and include one
of the following snippets in the OPACISBD system preference,
depending on your MARC flavour:
MARC21:
#952|<br/><h2>Items</h2><table><th>Copy number</th><th>Shelving
location</th><th>Koha item type</th><th>Barcode</th><th>Call number
(Full call number)</th><th>Materials specified (bound volume or
other part)</th>|<tr><td>{952t} </td><td> {952c} </td><td> {952y}
</td><td> {952p} </td><td> {952o} </td><td> {9523}</td></tr>|</table>
UNIMARC:
#995|<br/><h2>Items</h2><table><th>Copy number</th><th>Shelving
location</th><th>Koha collection</th><th>Barcode</th><th>Call number
(Full call number)</th><th>Numbering (volume or other part)</th>|
<tr><td>{9956} </td><td> {995e} </td><td> {995h} </td><td> {995f}
</td><td> {995k} </td><td> {995l}</td></tr>|</table>
Switch to the OPAC ISBD view for your biblio; notice how it does
not display item information.
1) Apply the patch, and restart Plack/memcached if necessary.
2) Refresh the OPAC ISBD view page, this time you should see item
information as per the OPACISBD system preference setting.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It could lead to server freeze if set to a big value (we are pushing
into an array and so RAM is being fulfilled, and CPU is looping).
I don't understand the point of this cookie.
var numPar = $("#booleansearch fieldset p").size();
if (numPar > [% search_boxes_count | html %]){
jQuery.cookie("num_paragraph", numPar,{ path: '/'});
}else{
jQuery.removeCookie("num_paragraph", { path: '/'});
}
But "#booleansearch fieldset p" does not exist, it's not 'p' but 'div'
elements.
I've removed the code related to num_paragraph and the "Return to the
last advanced search" feature still works as before.
From this comment:
# determine what to display next to the search boxes (ie, boolean option
# shouldn't appear on the first one, scan indexes should, adding a new
# box should only appear on the last, etc.
The only bit that is not working as described is "adding a new box
should only appear on the last", but it has been working this way for
a long time already I think, and I don't see it as a bug.
Test plan:
Read the code, check that the above is correct.
Search for regression in this "return to last adv search" feature added
by bug 13307.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
One big patch for one big move.
The "News" feature (opac_news) has been hijacked to handle some system
preferences (bug 26050). The goal was to take profit of the UI (editor)
and the ability to translate the value.
Disclaimer: This patch is NOT offering the best implementation but, as
we still don't have bug 24975, it cannot be done now. And no, we don't
want to wait for it to move forward here. This patch is going into the
right direction anyway.
This enhancement is going to rename the "News" with a more genertic
"Additional contents". We have two different "categories" of content:
"news" and "html customizations".
What does it bring?
- A split on the UI for disambigate the two types of content (news and
syspref/html customizations)
- A simplification of the edit form: all languages will be translatable
on the same view (like the "notice templates")
- Ground will be prepared for different types of content (if needed later)
- Staff news can be translated
How was the "News" area working before this patch?
The opac_news DB table contained a (very inconsistent) 'lang' column.
The different values were:
- '' => news to display at the OPAC and staff interfaces
- 'koha' => news for staff only
- 'slip' => news for slip notices
- $lang => news for OPAC only, translated in $lang ('en', 'es-ES', etc.)
- "$location_$lang" => A syspref moved to this "news" area. The syspref
is $location, and is translated in $lang. Eg. OpacLoginInstructions_en,
OpacLoginInstructions_fr-FR, opacheader_es-ES
This patch is improving the DB structure with the following changes:
- renaming 'opac_news' with 'additional_contents'
- new 'category' column
=> 'news' or 'html_customizations'
- new 'location' column
=> For 'news': 'staff_and_opac', 'staff_only', 'slip'
=> For 'html_customizations': the old syspref name (eg. 'OpacLoginInstructions').
- new 'code' column (see later for more info)
- the 'lang' column will only contain the language code ('en', 'es-ES',
etc.). BUT a 'default' entry will ALWAYS exist for fallback behaviour.
We are getting closer to the 'notice template' table structure because
we want to match its UI. The 'code' column will bring us the ability to
group the different 'additional_contents' rows. The code for a given
news will be the same, but the (lang, title, content) will differ.
Examples:
News 1 will have, for each of the translated versions
(category, code, location, branchcode)
('news', 'News1', $location, $branchcode||undef)
And the 3 following columns will differ:
(title, content, lang)
('title for news 1', 'content for news 1', 'default')
('titulo para 1', 'contenido para 1', 'es-ES')
Note that the "category" is not strictely necessary, but it seems better
to have the ability to split the different content by category/type
easily.
Additional changes:
- Syspref 'NewsToolEditor' is renamed 'AdditionalContentsEditor'
- Koha::NewItem => Koha::AdditionalContent
- Koha::News => Koha::AdditionalContents
- Script and template renamed from koha-news to additional-contents
- Foreign keys have been renamed
- Subpermission edit_news has been renamed edit_additional_contents
- The UI can now be accessed via a "News" or "HTML customizations" link
from the tools module. The related contents will then be displayed (both
categories are now split)
Changes not done here:
- Primary key 'idnew' could be renamed 'id'
Limitations of the upgrade:
News cannot be grouped by a unique code for existing translations.
=> A given news will be now displayed several times on the translated
interface
Any ideas to improve the upgrade behaviour?
We will have to add a warning in the release notes to tell libraries to
review their news.
Test plan:
0. Don't apply the patches
1. Translate the interfaces in some languages
. Create some news for staff and OPAC
. Create some content for different entry of HTML customizations
Note that you are forced to define a 'default'.
Also note that you are only forced to fill the title (not the content).
This is certainly problematic (see FIXME in the code) as sometime only
the content is displayed.
. Play with the interface (edit, delete, filter)
. Go to the different places the news are displayed, and confirm they
are displayed correctly (staff home, opac home, opac rss)
. Create 1+ news for 'slip', check an item out and 'print slip' (from
the circulation page). You must see the news.
. Go to the different places you are expecting the HTML customizations
to be present and confirm that you see them.
. Switch the lang of the interface and confirm that you now see the
content in the translated version
. Generate the templates in another language, don't translate the
content
. Use this language for the interface and confirm that the 'default'
version is displauyed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Use a hash for better readability and reusability.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is the only remaining non-XSLT only feature. We should remove the
non-XSLT views that have been deprecated for a while now, and remove
this feature.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If we no longer offer the sortfield with :asc actively, we should
probably write it somewhere too.
Replaced a few defined tests by empty test. No need to split empty
string or zero etc.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a check for a 'direction' paramter in list sorting.
It maintains the existing syntax for sorting 'sortfield=field:direction'
but adds support for the form used in paginations and more commonly thtoughout
Koha' sortfield=field&direction=direction'
To test:
1 - Create a public list
2 - Add enough items to generate two pages (40 worked for me)
3 - View the list and enforce sorting by date added descending:
sortfield=dateadded:desc
4 - Note the titles shown
5 - Click to second page using the pagination bar
6 - Note the same titles are shown, in a reversed order
7 - Apply patch
8 - repeat 305
9 - Second page is sorted correctly!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TO test:
1 - Write a report
2 - Click the svc link in the saved reports list
3 - ISE
4 - Make report public
5 - Click the svc link in saved reports list
6 - ISE
7 - Apply patch
8 - Comfirm opac/public link works
9 - Make report not public
10 - Confirm the internal svc link works
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From
commit b7acefa116
Bug 27948: (follow-up) Use Koha.news and PROCESS koha_news_block to bring disclaimer
opac/opac-request-article.pl changed file mode from 100755 to 100644
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to add the format to the forms entering new requests:
opac/opac-request-article
circ/request-article
If the pref contains multiple formats like SCAN|PHOTOCOPY, the first listed
format will be preselected on the request form. If there is only one option,
we should not disable the select however. (Possibly hide it.)
If we have no mandatory fields, we should not allow the submit of a complete
empty form (check on OPAC).
And we need to show the format of pending requests on forms:
opac/opac-user
circ/request-article (biblio detail tab)
circ/article-requests (staff form to handle requests)
members/moremember (Article requests tab at the bottom)
circ/circulation (Checkout/Article requests tab)
Note: The last two forms use the same include file.
Test plan:
[1] Add an article request via opac or staff. Choose Scan.
[2] Verify that you see the Scan format on opac-user and the
above-mentioned staff forms.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This method is a mix of database relationship accessor and marc field
accessor. We have get_marc_notes already and other patches in the queue
are also starting to introduce get_marc_* named methods. This patch
updates the method name to conform with that scheme.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I believe the syspref check is better placed in the controller. This way
the host_record method is not so closely tied to the articel requests
feature and may subsequently prove useful to future use cases.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In order to prevent an error like:
Can't call method "host_record" on an undefined value at opac/opac-request-article.pl
Also chmod's host_record.t to 755 (File must have the exec flag)
Test plan:
Change the URL so that the biblionumber does not exist.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If an article record has been catalogued separately, has no items and
contains a reference to its host via MARC21 field 773 (host item entry),
this patch makes an article request redirect to the host record while
copying title, author and page info (from 773$g).
This is accomplished by using the new Koha::Biblio->host_record method.
Note: Subfield 773$g may contain additional information on volume and
issue number etc. It will be very hard or perhaps impossible to parse $g
and copy these details into the corresponding fields of the article
request form for all possible variations used in libraries. A similar
remark can be made for selecting the correct item (when item level is
used). We could try this on a future report, but will probably need at
least a preference to define the expected format.
Test plan:
[1] Enable article requests. Add rules for an ART and a SER itemtype.
[2] Create a SER host biblio record.
[3] Create an ART biblio record, no items. Include a 773w pointing to the
SER record with '(MARCorgcode)[recno]' (keep the parentheses, remove
the square brackets when inserting the biblionumber).
Include text in 773$g too.
[4] Place an article request on the ART record. Verify that it redirects
you to the SER record while copying title, author, page info.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Display the value in the patron detail page
- Adds support for BorrowerUnwantedField (staff)
- Removes unecessary code in opac/opac-memberentry.pl
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the "Main Contact Method" field in the borrower
modification form.
This field is useful for reporting purposes, or to
know which contact method to use first when trying to contact a borrower.
Test plan:
0) Apply patch
1) updatedatabase.pl
2) In the staff client, edit a patron's contact info. There should be a new dropdown select to choose the main contact method
3) In the opac page, edit the personal details.There should be a new dropdown select to choose the main contact method.
4) Save the form. It should work.
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We only need to remove the obsolete module here.
Note that the two NewsToDisplay calls were removed already.
Replaced by a KohaNews.get call.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If ArticleRequestsDisclaimerText news is set, a disclaimer text will appear before an article request can be made
To test:
1. apply patches
2. enable ArticleRequest syspref
3. in OPAC place an article request for a patron
CHECK => No disclaimer text should appear before placing article request
4. add a text in ArticleRequestsDisclaimerText news
5. repeat step 3
SUCCESS => A disclaimer text is shown before you can place an article request
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Use of uninitialized value $direction in string ne at /usr/share/koha/opac/opac-shelves.pl line 265.
Bonus:
Use of uninitialized value $sortfield in string eq at /usr/share/koha/opac/opac-shelves.pl line 264.
Test plan:
While testing patch 1, check the logs for these warnings with and
without this patch.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1) Go to tools and define some news
2) Try different parameters, try to edit new items, and delete some
3) Go to all places where news are presented and ensure that there are
the right ones shown:
opac main page - based on language
opac righ column (formerly syspref OpacNavRight) - based on language
opac news rss feed
circulation slip (not quick slip)
intranet main page
4) run tests:
prove t/db_dependent/Koha/News.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 22544: fix count call - to squash
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes buildKohaItemsNamespace (and its only caller,
XSLTParse4Display) accept a an optional Koha::Items resultset.
This way we don't need to calculate (from the DB) the list of hidden
itemnumbers, but solve it in one query.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
hidden_items was not passed to XSLTParse4Display
2 things:
* Should we hide the biblio record if OpacHiddenItemsHidesRecord is set?
* allow_onshelf_holds is not working like in other scripts, what's the
expected behaviour? If hidden should we completely ignore the item?
Test plan:
1. Without the patch
2. fill OpacHiddenItems with «damaged: [1]»
3. find a record with several item
4. mark one of them as damaged
5. OPAC: go to the record, you shouldn't see the damaged item
6. add the record to a list
7. see the list
8. in Availability you see the damaged item mentioned, this is the issue
9. apply the patches and restart the services
10. the list should not mention the damaged item :D
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Simplify the affectation then trust it.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
JD Amended patch: remove duplicate comma
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove the debug statements or use Koha::Logger when we want
to keep it.
Test plan:
Confirm that occurrences of remaining occurrences of DEBUG need to be
kept (historical scripts for instance)
Confirm that the occurrences removed by this patch can be removed
Confirm that the occurrences replaced by Koha::Logger are correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me, noting a few minor points on BZ.
JD amended patch: replace "warn #Finished" with "#warn Finished", and
put the statement on a single line
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes a scope issue. Originally, a variable declared as
our $borcat
was replaced by
my $patron
This patch makes the method not rely on global variables, but have a
parameter for the patron, and thus things are clearer.
To test:
1. Open the OPAC detail page for a record
=> FAIL: The logs show some errors about the $patron variable not
available in the scope
2. Apply this patch
3. Repeat 1
=> SUCCESS: No errors
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
You do not even need a NULL value in a authorised value controlled
item field, a zero in damaged or withdrawn is enough to trigger the
warnings. (Because only the 1 is linked to an authvalue.)
Check your plack-opac-error.log before and after applying this change.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Without the patch I had at least four warnings per item: withdrawn,
lost, damaged and notforloan.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the MARC detail view in the OPAC so that it
evaluates whether a title can be placed on hold in the same way it is
done on the "normal" detail page and the ISBD detail page. This allows
for consistency in the display of the "Place hold" link.
To test, apply the patch and log into the OPAC.
- Perform a search which will return results, at least one of which can
be placed on hold.
- View the detail page, the MARC detail page, and the ISBD detail page.
In each case the "Place hold" link should appear in the sidebar.
- View the same pages for a record which cannot be placed on hold to
confirm that the link doesn't appear. For instance:
- All items are not for loan.
- All items are lost.
- There are no items attached.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At least when using Searchengine=Elasticsearch what happened was that
without () parenthese included the search for Host-item field was done
only to the first token, the subsequent ones matched any
fields. Adding the parentheses restrict the search to Host-item search
field only.
To test:
1) Set Searchengine = elasticsearch
2) Make a biblio with 245a = "biológica paranaense." and 773a = "Acta"
3) Go to a biblio with 245a = "Acta biológica paranaense" (in
kohadevbox or create one if you need).
4) Notice that the "Acta biológica paranaense" biblio's detail page link "Show
analytics" takes to the "biológica paranaense" incorrectly just
because the 773a has "Acta" and the words "biológica" and "paranaense"
appear elsewhere in the biblio.
5) Apply patch and notice the link is now not created at all
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In staff interface and OPAC, searching only zero leads to advanced search page.
Test plan :
1) Go to opac home page
2) Enter 0 into search field
=> Without patch you go to advanced search page
=> With patch you go to results page
3) Idem on staff interface
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Good catch. I forgot this file didn't get the hiding logic refactoring
yet.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 10584 made Koha hide biblios for which all items match some criteria (in OpacHiddenItems) so they are hidden.
Add syspref OpacHiddenItemsHidesRecord controlling this behaviour.
Test plan :
1)
1.1) Create some biblio records with one item having damaged=1
1.2) Define system preference OpacHiddenItems = damaged: 1
2)
2.1) Set system preference OpacHiddenItemsHidesRecord to 'don't hide'
2.2) At OPAC : perform a search showing those records and some more
2.3) Check you see the all the records
2.4) For a record with hidden item check you don't get HTTP 404 for : normal view, ISBD view, MARC view
2.5) Check you can had tags on this record
2.6) Add record to basket, check you see it in basket
3)
3.1) Set system preference OpacHiddenItemsHidesRecord to 'hide'
3.2) At OPAC : perform a search showing those records and some more
3.3) Check you don't see the records with hidden item
3.4) For a record with hidden item check you get HTTP 404 for : normal view, ISBD view, MARC view
3.5) Show basket, check you see the records with hidden item
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
1. Add some values to the ROADTYPE authorized value
2. Go to PatronSelfRegistrationBorrowerUnwantedField and make sure
streettype is NOT checked
3. Go the self reg form, no street type field
4. Apply patch
5. Check the self reg form, streettype should be there with all the
options defined in ROADTYPE a.v.
6. Check the self modification form, street type should be there.
7. Make sure PatronSelfRegistrationBorrowerUnwantedField and
PatronSelfModificationBorrowerUnwantedField hide the field correctly.
8. Make sure PatronSelfRegistrationBorrowerMandatoryField properly makes
the field required.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
1. Set up the OPACNoResultsFound with the {QUERY_KW} placeholder.
2.Do a search with a comma that will return no results. Like "King, Martin Luther". If the returns results add some additional characters to the search until no results are returns.
3. Look at the #noresultsfound HTML element. Anything before (or after) the comma is omitted. So the placeholder looks something like 'Martin Luther' instead of 'King, Martin Luther'.
4. Apply patch
5. Try the search again, you should see the content before and after a comma
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the PayPal payments feature. It has been moved to
its' own plugin.
To test:
1. Apply this patches
2. Run:
$ updatedatabase
=> SUCCESS: Database updates correctly
3. Run:
$ koha-mysql kohadev
> SELECT * FROM systempreferences WHERE variable LIKE 'paypal';
=> SUCCESS: No results
4. On the sysprefs, OPAC section
=> SUCCESS: No PayPal-related sysprefs show up
5. Add some charges to your patron
6. In the OPAC, log in and see your charges
=> SUCCESS: Nothing broken
7. Install the PayPal plugin [1] or any other payment plugin
8. Restart plack (mandatory for the PayPal plugin)
9. Set some random data in the config (or better, real sandbox testing
data)
10. Go to the OPAC's account page and try to pay your debts (use the
checkbox to select lines)
=> SUCCESS: The PayPal payment method shows, you can click the button,
it fails due to bad config, but things work as expected.
11. Sign off :-D
[1] https://gitlab.com/thekesolutions/plugins/koha-plugin-pay-via-paypal/-/releases
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
before this patch, the limit only applies to groups of libraries
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Syspref is now called SearchLimitLibrary, and the description better
explains what the feature does. It works with the advanced search on the
staff client and OPAC, and the masthead search on the OPAC when
OpacAddMastheadLibraryPulldown is enabled.
Sponsored-by: Catalyst IT
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Trying to make the code a bit more readable removing unecessary
variables and parenthesis.
Code is duplicated but no idea where we could move it to.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This commit allows librarians to choose whether they want to query the
homebranch, holdingbranch or homebranch AND holdingbranch when they set
a library or library group search condition in the staff client and OPAC
advanced searches.
Test plan:
1. Apply patches, update database, restart services
2. Set up a record with one item. Edit the item so that:
home branch = Branch A
holding/current branch = Branch B.
Note the barcode of your item.
3. Go to Administration -> Library Groups. Create a library group that
only contains Branch A.
= homebranch and holdingbranch =
4. Go to Administration -> System preferences and find the new
SearchLimitLibrary syspref. Confirm it is set to 'homebranch and
holdingbranch' by default. Keep this tab open.
5. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
6. Submit the search and confirm you are taken to your item as expected.
7. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
8. Submit the search and confirm you are taken to your item as expected.
9. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
10. Submit the search and confirm you are taken to your item as expected.
= homebranch only =
11. Go back to your System preferences tab. Set the SearchLimitLibrary
syspref to 'homebranch'. keep this tab open.
12. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
13. Submit the search and confirm you are taken to your item as expected,
because the syspref is set to homebranch and the library group contains our item's
homebranch.
14. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
15. Submit the search and confirm you are taken to your item as expected.
16. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
17. Submit the search and confirm you are NOT taken to your item and your item
does not show in the search results.
= holdingbranch only =
18. Go back to your System preferences tab. Set the SearchLimitLibrary
syspref to 'holdingbranch'. keep this tab open.
19. Go to Advanced Search in the staff client in another tab. Under 'location and
availability', select your library group from the dropdown. Under
'search for', select the barcode option and enter your item's barcode.
20. Submit the search and confirm you are NOT taken to your item and your
item does not show in the search results, because the syspref is set to
holdingbranch and the library group does not contain our item's holdingbranch.
21. Go back to Advanced Search. Under 'location and availability', select
Branch B from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
22. Submit the search and confirm you are taken to your item as expected.
23. Go back to Advanced Search. Under 'location and availability', select
Branch A from the individual libraries dropdown. Under 'search for',
select the barcode option and enter your item's barcode.
24. Submit the search and confirm you are NOT taken to your item and your item
does not show in the search results.
25. Repeat the above test plan but do your searching with the OPAC
advanced search.
Sponsored-By: Brimbank Library
Signed-off-by: Amandine Zocca <azocca@ville-montauban.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes all places in Koha that rely on OpacHiddenItems
actually use C4::Context->yaml_preference instead of manually calling
the YAML libraries and handling it.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Items* \
t/db_dependent/Koha/Item* \
t/db_dependent/Koha/Filter/EmbedItems.t
=> SUCCESS: Tests pass!
3. Try hiding things with opac-ISBDdetail.pl and opac-search.pl
=> SUCCESS: Things work the same!
4. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TEST PLAN:
1 Set up some patron extended attributes
2 Make sure you check 'Display in OPAC' and 'Editable in OPAC'
3 Go to self registration and attempt to register
4 you get an error ( Not a SCALAR reference at /kohadevbox/koha/opac/opac-memberentry.pl line 110 )
5 Apply patch
6 repeat steps 1-3, ther should be no error now
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch defaults the holds pickup location to the items homebranch or the patron's branch when a group option is selected
for the hold fulfillment policy and the patron is not allowed to choose the branch on the OPAC
To test:
1 - Set 'Default checkout, hold and return policy' -> 'Hold pickup library match' to item's hold group or patron's hold group
2 - Set OPACAllowUserToChooseBranch to 'Don't allow'
3 - Try to place an item level hold on the opac
4 - Ka-boom, etiher:
The method Koha::Item->patrongroup is not covered by tests!
The method Koha::Item->itemgroup is not covered by tests!
5 - Apply patch
6 - Repeat
7 - Note the pickup location is set to either the patron's branch or the items homebranch
8 - Repeat plan with the other group setting
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Go to Admin -> system preferences and enable the TrackClicks syspref
(set to Track or Track anonymously)
2) Find a record in the staff client with an item. Edit the item and put
two external URLs in the Uniform Resource Identifier field, e.g.
"https://www.google.com/ | https://twitter.com/"
3) Search for that record in the OPAC. Notice the two links in the
holdings table.
4) Click a link and confirm that you are directed to a 404.
5) Apply the patch and refresh the page
6) Click a link and confirm that you are directed to the page as
expected
7) Go back to edit the record in the staff client and remove one of the
links from the URI field
8) Go back to the OPAC and confirm you can still access the link as
expected when there is only one URI
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The check methods were positioned under the 'Internal methods' section
of the meodule but are used externally.
It also felt strange to have a noop or die method. Instead, I propose
renaming them to `repeatable_ok` and `unique_ok` and returning a
boolean denoting their state.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the pref KohaAdminEmailAddress was not set correctly (invalid email)
and has been used to generate message, the message_queue table can contain
some messages that are not sent (pending) and will be processed each
time a new self-reg is done.
The PatronSelfRegistrationVerifyByEmail feature must send only the
notice we just generated, not the whole pending queue.
Test plan:
1. Do not apply the patches
2. Set KohaAdminEmailAddress to an invalid email (root@localhost for
instance)
3. Turn on PatronSelfRegistrationVerifyByEmail
4. Self-reg a patron
5. Boom (that must be fixed on a separate bug report)
6. Set KohaAdminEmailAddress to a valid email (root@example.org)
7. Self-reg a patron
8. Still Boom! (because it's processing the first invalid email)
9. Apply the patches, restart_all
10. Self-reg a patron
=> The email is sent!
Notice the change in DB, the first email is still there with status
"pending" and second email is sent!
QA: at step 10. TODO first email must be 'failed' (highlight in tests)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves C4::Biblio::GetMarcNotes to
Koha::Biblio->get_marc_notes. This is so get_marc_notes can be
used in templates and notices.
To test:
1. Find a record that has a note (3xx for UNIMARC, 5xx for MARC21).
Confirm the notes still show as normal under the Descriptions tab.
2. Add the record to the cart.
3. View your cart and click 'more details'. Confirm notes show as
normal.
4. Log in to the OPAC. Find the record and add it to the cart
5. View the cart and click 'more details'. Confirm notes show as
normal.
6. View the record detail page and confirm the notes show as normal
under the Title Notes tab.
7. Confirm tests pass:
- t/Biblio.t
- t/db_dependent/Koha/Biblio.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new type of system preference entry option: patron
category. A preference with this type will show either a <select> with
patron categories to choose from or a multiple-select menu for choosing
one or more.
This prevents possible errors from incorrect category codes being
entered manually.
To test, apply the patch and run the database update.
- Go to Administration -> System preferences.
- Test each of the updated preferences to confirm that the available
options are correct and that your selections are correctly saved.
- Single category selections, PatronSelfRegistrationDefaultCategory
and GoogleOpenIDConnectDefaultCategory. With each of these you
should see a dropdown where you can select of all the existing
patron categories.
- Multiple selections, OPACHoldsIfAvailableAtPickup and
BatchCheckouts: These preferences should have an option for
selecting one or more system preferences at once.
- Test the pages affected by the updated system preferences:
- With BatchCheckouts enabled, confirm that the batch checkout page is
correctly limited by patron category.
- Set the OPACHoldsIfAvailableAtPickup preference to "Don't allow" and
select at least one patron category in the
OPACHoldsIfAvailableAtPickupExceptions preference.
- Log in to the OPAC as a patron whose category was not selected in
the OPACHoldsIfAvailableAtPickupExceptions preference.
- Try to place a hold on an item which is available at a library.
- When confirming the hold, the libraries where the item is available
should be disabled in the "Pick up location" dropdown.
- Repeat the process as a patron whose category was selected in
OPACHoldsIfAvailableAtPickupExceptions. There should be no disabled
pickup locations.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
$template->param(
+ koha_news => @all_koha_news,
We must not pass an array, the number of elements of the hash passed to the template may be inconsistent.
It's working because of an error earlier in the script:
+ @all_koha_news = &GetNewsToDisplay($news_lang,$homebranch);
GetNewsToDisplay returns an arrayref
Test plan:
Define at least 2 news to display on the OPAC main page
Hit opac-main.pl
=> All news are displayed
Click one
=> You see the single news you selected
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It seems that we don't really need all this overhead.
YesNo must be a boolean and contain 1 or 0.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If categorycode is selected in
PatronSelfRegistrationBorrowerUnwantedField and
PatronSelfRegistrationVerifyByEmail is turned on, the patron self registration
fails with
[You must provide a patron's category to validate password's strength
and length] at /usr/share/perl5/Exception/Class/Base.pm line 88
Test plan:
0. Select categorycode in PatronSelfRegistrationBorrowerUnwantedField
and turn on PatronSelfRegistrationVerifyByEmail
1. Self register a patron
2. Confirm that it works as expected with this patch applied.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames the systempreference to be a bit clearer and uses
explicit options rather than a yes/no
Additionally it standardizes the export from the advanced cataloging editor
with that from the details page
To test:
1 - Apply patches
2 - Update database and restart all the things
3 - Open a record in the advanced editor and save it as marc and xml
4 - Note the file name is 'bib-{biblionumber.{format}'
5 - Edit the syspref 'DefaultSaveRecordFileID' to be control number
6 - Repeate 3-4 on a record with and without a control number
7 - If control number present fiule name should be 'record-{controlnumber}.{format}'
8 - Otherwise it should be as above
9 - Repeat tests from the details page of a record
10 - Repeat tests from the opac details page of a record
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a difference between YAML::Load and YAML::XS::Load
From YAML::XS pod:
"YAML::XS only deals with streams of utf8 octets"
Test plan:
We are going to test 1 occurence and QA will confirm others don't
contain typos.
0. Don't apply the patches
1. Create a new itemtype with code=❤️
2. Create a new item using this itemtype (to biblionumber=1 will work)
3. Fill OpacHiddenItems with
itype: [❤️]
4. Search for "street shuffle" or any terms that will return the biblio
Notice that the item is there (there is an error in logs)
5. Apply the patches
6. Repeat 4 and confirm that the item is now hidden
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From tht YAML pod:
"""
This module has been released to CPAN as YAML::Old, and soon YAML.pm will be changed to just be a frontend interface module for all the various Perl YAML implementation modules, including YAML::Old.
If you want robust and fast YAML processing using the normal Dump/Load API, please consider switching to YAML::XS. It is by far the best Perl module for YAML at this time. It requires that you have a C compiler, since it is written in C.
"""
See also
https://gitlab.com/koha-community/qa-test-tools/-/merge_requests/35
Test plan:
Try some place where YAML::XS is not used and confirm that it works
correctly
QA note: This patch removes some uses of YAML that were not useful
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is an input filter but it does nothing
Test plan:
You need 2 differents users, U1 and U2
Create several (at least one) suggestions for each of them
Test the following with and without OPACViewOthersSuggestions:
With U1 logged in, go to the suggestions tab and use the input to filter
the suggestions.
It should work correctly.
Also play with the "Suggested by" options
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Apply patch
2 - Search on staff and opac side
3 - Confirm you can paginate results
4 - Confirm you see 10 pages on pagination if under page 10
5 - Confirm you see 20 pages in pagination if over page 10
6 - Confirm you can go to first or last page
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch: perltidy
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature is not used as far as we know and it's not known to work.
It's preferable to remove it.
Test plan:
Make sure the OpacGroupResults pref code is removed, as well as the
PazPar2 files and code.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The value of PatronSelfRegistrationLibraryList is used to display the dropdown
list of the libraries, but not after the form is submitted.
Test plan:
1. Empty PatronSelfRegistrationLibraryList
2. Self register a new patron
=> Confirm the dropdown list with the libraries contain all the
libraries
3. Fill in PatronSelfRegistrationLibraryList with branchcodes (eg. "CPL|MPL")
4. Self register a new patron
5. Edit the HTML form and replace the option's value with another
branchcode (FPL)
6. Save
=> Without this patch the branchcode FPL is used
=> With this patch applied an ugly 500 is returned
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When a patron edit their personal details at the OPAC, the password must
be removed from the mandatory fields
Test plan:
0 - Don't apply the patch
1 - Set PatronSelfRegistrationBorrowerMandatoryField to require password
2 - Create or sign in as a patron on the opac
3 - Click 'Your personal details'
4 - Attempt to edit
5 - Save changes
=> They are rejected because not all required fields are populated
6 - Apply the patch
7 - Repeat 3 to 5
=> details are saved successfully
8 - Test the self registration feature and confirm that the password is
required
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames the reviewson system pref to OPACComments
Test Plan:
1. In Koha Administration, search for the reviewson system preferance
2. Note the presence of the reviewson system preferance
3. Apply the patch and run updatedatabase.pl
4. Repeat steps 1 and 2. The reviewson preferenace should be gone
5. Seach for and note the OPACComments system preferance
6. Ensure that the OPACComments system preferance operates correctly, as
if it were reviewson
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=27484
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch uses the ErrorDocument middleware to use Koha's
custom error pages instead of generic Plack error responses
Test plan:
0. Apply patch
1. vi /usr/sbin/koha-plack (and change "development" to "deployment")
2. vi ./opac/opac-main.pl
3. Add "die" to line 2
4. vi ./mainpage.pl
5. Add "die" to line 2
6. cp ./debian/templates/plack.psgi /etc/koha/sites/kohadev/plack.psgi
7. koha-plack --restart kohadev
8. Go to http://localhost:8080/cgi-bin/koha/opac-main.pl
9. See a beautiful OPAC 500 error instead of "Internal Server Error"
10. Go to http://localhost:8080/cgi-bin/koha/blah.pl
11. See a beautiful OPAC 404 error instead of "not found"
12. Go to http://localhost:8081/cgi-bin/koha/mainpage.pl
13. See a beautiful Staff interface 500 error instead of "Internal Server Error"
14. Go to http://localhost:8081/cgi-bin/koha/blah.pl
15. See a beautiful Staff interface 404 error instead of "not found"
For bonus points:
16. koha-plack --disable kohadev
17. koha-plack --stop kohadev
18. service apache restart
19. Repeat the above test plan to show CGI still works for 404 (although 500
will show "Software Error" due to C4::Context needing some improvements)
20. Using the "Network" tab on your developer tools, make sure 404 and 500
are returned by the appropriate error pages
Signed-off-by: Eden Bacani <eden.bacani@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The method Koha::Items->itemnumber is not covered by tests!
Trace begun at /kohadevbox/koha/Koha/Objects.pm line 592
Koha::Objects::AUTOLOAD('Koha::Items=HASH(0x55981fd94790)') called at /kohadevbox/koha/opac/opac-reserve.pl line 465
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch leverages on bug 24254's
Koha::Items->filter_by_visible_in_opac to filter out items that
shouldn't be presented to the end user in the OPAC interface.
To test:
1. Circulation and Fine rules for item-level holds are set to allow.
2. Setting the OpacHiddenItems preference to "ccode: [SUPPRESS]"
3. An item with collection Code Suppress is set.
4. Search for the title in the OPAC.
=> SUCCESS: The Suppress ccode item isn't shown.
5. View the detail page for the title.
=> SUCCESS: The suppress ccode item isn't shown.
6. Place a hold on the item:
-- Click "Show more options"
-- Select "A specific item"
=> FAIL: the ccode with the opachiddenitems rule has an item that appear in the list to place a hold
7. Apply this patch and repeat 6
=> SUCCESS: The item doesn't show!
8. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Apply patch, restart_all
2. Add some OPAC messages by clicking 'Add a message' on Home › Circulation › Checkouts › patron
3. Log into the OPAC as that patron and you should see a notice about how many messages you have with a link to opac-user.pl
4. Add multiple OPAC messages and make sure it all continues to work.
5. Also add an OPAC note from memberentry.pl. Refresh the OPAC and you should see a 1 message added to the total
6. Try an OPAC without any messages. If there are no messages or any other kind of notification the dashboard should NOT appear at all.
7. Add a 'staff - internal' note. It should not count towards your total messages in the dashboard.
8. Test it with some other notices that would appear on the dashboard, checkouts, holds, overdues.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The authorised values OPAC_SUG displayed at the OPAC show the staff
description.
Test plan:
1. Create an auth value in opac_sug, with different text for the description and OPAC description.
2. Go to the OPAC and open the purchase suggestion form.
3. Note in the Reason for purchase drop down, the descriptions appear, the text entered in the OPAC description field.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the browse search interface to confirm to new
interface patterns in the Bootstrap 4 framework, especially in the form
markup.
The results list has been changed to a Bootstrap "Collapse" component
configured as an accordion
(https://getbootstrap.com/docs/4.5/components/collapse/#accordion-example).
Instead of loading the bibliographic record results below the list of
terms returned, the bibliographic results are now displayed in the
"panel" expanded below the selected term. Subtitle has been added to the
information displayed about the bibliographic record.
To test you must be using ElasticSearch and the OpacBrowseSearch
preference must be enabled. Apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Open the "Browse search" page in the OPAC.
- Test various searches: Author, Subject, and Title.
- When results are found, the should be displayed as a Bootstrap-styled
accordion widget. Clicking any individual result should expand the
panel containing the corresponding records.
- Clicking the record link should open the bibliographic detail page in
a new window.
- When no results are found, a Bootstrap-style "alert" box should
appear.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes the bug when there is no patron category available for
selection in self registration form. It uses PatronSelfRegistrationDefaultCategory
to get patron's password length and strength.
To test:
1. Do not apply this patch
2. Allow SeflRegistration, set PatronSelfRegistrationDefaultCategory to
a valid patron category and finally add categorycode to PatronSelfRegistrationBorrowerUnwantedField
3. Go to opac and enter self registration form
CHECK => There is no patron category available for selection
=> Password's info alert shows "Password must contain at least
undefined characters"
4. Fill the form setting a password and send.
CHECH => You get an exception saying "You must provide a patron's
category to validate password's strength and length"
5. Apply this patch and restart_all
6. repeat steps 3 and 4
SUCCESS => Password's info alert message shows a number instead of
"undefined"
=> Password's strength and length checks are working
=> If you change default category's lenght or strength parameter it get's reflected when you refresh the page
=> When you click send, patron is saved
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In OPAC password recovery perl opac/opac-password-recovery.pl
there are some error codes not in Template koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-password-recovery.tt
This patch fixes several bugs:
- remove 'use Koha::Patrons' defined twice
- remove vars $errTooManyEmailFound $errBadEmail, not used in any template
- add in template text for error 'errNoBorrowerEmail'
1) Create a patron A with login but no email
2) Create a patron B with login and valid email
3) Go to system preferences set 'OpacResetPassword' to ON
4) Make sure that OpacPasswordChange is also ON
5) Go to 'Forgot your password' in OPAC
6) Enter login if patron A and save
=> You get message 'This account has no email address we can send the email to.'
7) Enter login if patron B and save
=> Password recovery is send, no error message
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As highlighted by Katrin, the selfcheckin module was not aware of this
work. This commits gives it awareness of the too_unseen renew error and
the "seen" argument that can be passed to AddRenewal
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds support for unseen renewals.
Here we retrofit knowledge of unseen renewals and add the display of unseen
renewal counts and warnings, in addition to adding the ability to
specify a renewal as being "unseen".
The functionality added here is goverened by the UnseenRenewals syspref.
Signed-off-by: Sally Healey <sally.Healey@cheshirewestandchester.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds patron's hold history in OPAC.
To test:
1. apply this patch
2. Find a patron, place several holds and cancel or fulfill them
3. Go to patron's opac
CHECK => There is no 'your holds history' option in menu
4. In admin preferences enable OPACHoldsHistory
5. Go back to patron's opac
SUCCESS => There is a 'your holds history' menu option
=> Holds history displays all holds
6. Change order, and list limit
SUCCESS => All controls work as expected
7. Sign off.
Signed-off-by: Todd <tgoatley@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability for ILL to send notices, both triggered by
staff and triggered by events.
Staff can trigger notices to patrons from the "Manage ILL request" screen:
- ILL request ready for pickup
- ILL request unavailable
- Place request with partners
The following notices to staff are triggered automatically:
- Request has been modified by patron
- Request has been cancelled by patron
Branches can now specify an "ILL email" address to which notices
intended to inform staff of changes to requests by patrons can be sent.
The sending of notices is controlled by a few new sysprefs:
- "ILLDefaultStaffEmail" - Fallback email address for staff ILL notices
to be sent to in the absence of a branch address
- "ILLSendStaffNotices" - To specify which staff notices should be sent
automatically when requests are manipulated by patrons
Patron notices are also controlled by the patron's messaging
preferences
Sponsored-by: PTFS Europe
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When using OPAC password recovery form, opac/opac-password-recovery.pl :
if one provides correct login and an email, there is a check that this email is one of patron's.
This check uses RegExp with case insensitive :
if ( $email && !( any { /^$email$/i } @emails ) )
This is a security issue since one can simply enter '.*'.
Severity is normal because the login must be a correct.
I propose to use simple string compare with lowercase to be case insensitive.
Test plan :
1) Don't apply patch
2) Enable system preference 'OpacResetPassword'
3) Go to 'OPAC > Log in to your account > Forgot your password?'
4) Enter an existing userid or cardnumber and '.*' in 'Email'
5) The password recovery is created ! (check table 'borrower_password_recovery')
6) Apply patch
7) Enter an existing userid or cardnumber and '.*' in 'Email'
8) You get the message 'No account was found with the provided information.'
9) Enter an existing userid or cardnumber and in 'Email' the corresponding email but with different case
10) The password recovery is created (check table 'borrower_password_recovery')
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the OPAC list page so that download options are
shown in a dropdown menu instead of a modal dialog. This solves a bug
introduced by the Bootstrap 4 upgrade and makes it consistent with the
cart interface.
To test, apply the patch and view the contents of a list in the OPAC
which has multiple items on it.
- In the toolbar at the top of the list contents table the "Download"
button should now be a dropdown menu.
- Selecting any of the download options should trigger a download
prompt.
- Test with and without some CSV profiles which have been
configured for use in the OPAC
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to not only block the circulation of a guarantor based on fines owed by guarantees, but would also like to block circulation for all guarantees as well. Basically, if a family as a whole reaches a certain threshold of fines, the entire family will be blocked from checking out items.
Test Plan:
1) Apply this patch
2) Set NoIssuesChargeGuarantorsWithGuarantees to $14
3) Create a family of four ( 2 guarantors, 2 guarantees ) where the parents guarantee both children
4) Give 3 of the 4 a $5 fine
5) None of them should be able to check out items
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In this patch we remove the limitation of 1 cover image per item
Sponsored-by: Gerhard Sondermann Dialog e.K. (presseplus.de, presseshop.at, presseshop.ch)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. git grep -i AllowPurchaseSuggestionBranchChoice **/*.pm **/*.pl **/*.t
2. There should no longer be any code related to the old sys pref AllowPurchaseSuggestionBranchChoice
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
-Apply patch
-Check OPACSuggestionUnwantedFields
-Check some fields as unwanted
-Go to the OPAC suggestion page and make sure these correct fields are hidden
-Turn on the system preference AllowPurchaseSuggestionBranchChoice to see the branch choice on the form
-Make sure you can correctly hide this one and still submit the purchase suggestion for without error.
-Go through each option and make sure it hides properly.
Note: You will only see the patron reason field when there are authorised values in the OPAC_SUG category
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At a later development stage, exceptions where added for bad addresses.
This wasn't addressed in the controllers.
This patch makes the basket and list sending controller scripts move
email creation inside the try/catch block to handle those situations. It
also UTF-8 encodes the attached marc.
On broadly testing this I found that if the TT templates that are used
to build the email contains non-latin characters, those get
double-encoded. So this patch also removes an explicit encoding that is
done, which colides with Email::MIME implicit encoding.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adapts controller scripts that used sendmail. Also the syntax
for Koha::Email has changed and this patch adapts it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a block to capture attempts to return items with
attached materials when checking in via the self checkout when the
relevant system preference is set.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch capitalizes the 'ADDITIONAL_MATERIALS' key in the
needsconfirm hash return value for CanBookBeIssued to restore
consistency with previous code and ensure SIP Checkout works as
expected.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan
1/ Enable the feature as per previous patches
2/ Attempt to return an item with materials attached via the SCI
3/ Note that the return is blocked with the message '(The item
cannot be returned at a self service terminal, please see library
staff for assistance)'
4/ Signoff
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan
1/ Enable the feature as per previous patches
2/ Attempt to checkout an item with materials attached via the SCO
3/ Note that the checkut is blocked with the message 'Item must be
issued at a circulation desk'
4/ Signoff
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently we apply weighting to all searches except advanced search. The theory
being that when selecting indexes we don't want to apply weights. When searching
in ES weights are only applied to relevant results so it doesn't matter.
i.e. if weighting author*100 but searching subject, a term matching the subject search in author
is not boosted.
Given this, we should always apply weights, unless the user wishes not to
To test:
1 - Set some weighting
2 - Do some searches
3 - Note your terms and results, try advanced and regular searches specifying indexes or not
4 - Apply patch
5 - Note that opac and staff advanced search have option to apply weights
6 - Compare searches after the patch to see how weighting affects, it should be beneficial or not at all
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
0) Activate password reset in system preferences.
1) Initiate a password recovery.
2) Try to submit with an invalid password.
3) Confirm that validation occurs.
4) Try to submit with mismatching passwords.
5) Confirm that validation occurs.
6) Sign off.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Theoretical change. If somehow the search would return more than one result, the code is wrong.
The if test can be simplified: remove scalar and >0.
We should not pass @array to one param. It would theoretically add wrong items or
trigger an odd number warning. If it is only one, it is no problem. But it is buggy.
Test plan:
Pass an existing news_id to opac-main. Item visible?
And pass a not-existing. Error message?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently, if you have OverduesBlockCirc set to "Ask for confirmation"
and OverduesBlockRenewing set to "allow renewing", you get caught
in a loop where you can never renew an overdue material.
This patch uses CanBookBeRenewed for renewals, rather than CanBookBeIssued,
which means the correct rules are applied to the correct scenario.
To test:
a. Set OverduesBlockCirc to "Ask for confirmation"
b. Ensure "OverduesBlockRenewing" set to "allow renewing"
0. Apply the patch
1. Checkin item barcode 3999900000001
2. Go to http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
3. Checkout item barcode 3999900000001 to 1 year ago
4. Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
5. Login as the "koha" user
6. Click on "Renew item"
7. Note that the item is renewed
8. Checkin item barcode 3999900000001
9. Go to http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
10. Checkout item barcode 3999900000001 to 1 year ago
11. Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
12. Login as the "koha" user
13. Type "3999900000001" into the box under "Scan a new item or enter its barcode"
14. Click "Submit"
15. Note the system says the item is already checked out and it prompts
you to click "Renew item" in this screen
16. Click "Renew item"
17. Note the system says "Item renewed" near the top of the screen, and the "Due"
date near the bottom of the screen is more recent than the original due date
18. Checkin item barcode 3999900000001
19. Go to http://localhost:8080/cgi-bin/koha/sco/sco-main.pl
20. Login as the "koha" user
21. Type "3999900000001" into the box under "Scan a new item or enter its barcode"
22. Click "Submit"
23. Note the system says "Item checked out" and the item appears in the checkouts
at the bottom of the screen
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the capability to override minPasswordLenth and RequireStrongPassword settings by category
To test:
1. koha-shell kohadev
2. koha-mysql kohadev
3. drop database koha_kohadev;
4. create database koha_kohadev;
5. go to admin page and start webinstaller. There continue the steps until onboarding.
6. reach step 3 of onboarding and create a new administrator patron
CHECH => Password control woks as normal (Minimum length 3 and strong required)
7. finish Koha installation and enter admin with your new administrator
8. set minPasswordLength to 3 and RequireStrongPassword to “Don’t require”
9. Create a new category (CAT2 from now on.. CAT1 is the category you made in onboarding process) and set minimum password length to 8 and require strong password
10. Create two new patrons, one with CAT1(patron1) and one with CAT2 (patron2)
CHECK => In both cases, try different combinations of length and strength. For patron1 the only requirement is to have 3 letters, but for patron2 the minimum length will be 8 and will require strong password.
CHECK => Try changing patron category before saving. Password requirements will change with category change.
11. Edit CAT1 and set minimum password length to 5
12. Go to patron1 details page, and change password.
CHECH => Now password minimum length is 5, but still it doesn’t require strong password
13. Edit CAT1, leave blank minimum password length and set require strong password to yes.
14. Go to patron1 details page, and change password.
CHECH => Password minimum length is back to 3, but now strong password is required
15. Set minimum password length in CAT2 to 12.
16. Go to patron2 details page, and click to fill a random generated password
CHECK => generated password should be 12 characters length
17. Set PatronSelfRegistration to Allow in admin settings
18. Go to OPAC and fill self registration from.
CHECK => Play with patron category. For each change in category, password requirements are modified.
CHECK => Set CAT1 as patron category, set ‘aA1’ as password (or another valid password for CAT1) and before hitting submit button, change to CAT2. Form should enter invalid state, and CAT2 password requirements should be displayed as error in password input.
19. Create a patron for CAT1 and another for CAT2, leaving password blank
CHECK => For CAT1’s patron, generated password length is 8 (minimum length for generated passwords), but for CAT2’s patron should be 12
20. In admin set PatronSelfRegistrationVerifyByEmail to require
21. Fill self registration form again with CAT2 as category
CHECK => Password requirements works as previous case.
22. Leave password blank and click submit
23. select * from message_queue;
24. Copy the link in the message and paste it in OPAC
CHECH => Generated password is 12 characters long. (Copy user id for next steps)
25. In admin set OpacResetPassword to Allow
26. Go back to OPAC, reload and click on “Forgot password?” link
27. Paste user id and click submit
28. Repeat steps 23 and 24
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in warning.
29. Login OPAC with the last user and your newly created password
30. Go to “Change your password” option
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in below “New password” input.
31. prove t/db_dependent/AuthUtils.t t/db_dependent/Koha/Patron/Category.t
32. Sign off
Sponsored-by: Northeast Kansas Library - NEKLS
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Additionally, only include renewable items in 'Renew all'
To test:
1 - Check out some items to a patron, ideally:
Some not renewable because set for auto renewal
Some not renewable because of holds
Some renewable
2 - Confirm 'Renew selected' and 'Renew all' show on the opac
3 - Click 'Renew all'
4 - You get errors about the non-renewable items?
5 - Check in all renewable items
6 - Confirm you still see renew buttons
7 - Apply patch
8 - Refresh and you shoudl not see renew buttons
9 - Check out a renewable item
10 - Click 'Renew all'
11 - Renewable item is renewed with no error
12 - Try again with 'Renew selected'
13 - Confirm it works as expected
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes opac-detail.pl query for analytics the same way it
would do with the generated link (i.e. based on UseControlNumber) and
passes a flag to the XSLT so it displays (or not) the 'Analytics' link.
To test:
1. Apply the first patch
2. Have a known record without analytics
3. Open the record in the OPAC
=> FAIL: It shows the 'Analytics' link
4. Have a record known to have analytics and open in OPAC, on a separate
tab
=> SUCCESS: It shows the 'Analytics' link
5. Apply this patch and restart_all
6. Reload the tabs
=> SUCCESS: It shows the link where it has to, and hides it where it
shouldn't be displayed
7. Sign off :-D
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Testplan for this patch:
1. Apply patch.
2. Make sure syspref "AutoApprovePatronProfileSettings" is set to "Disable".
3. Edit patron personal details via opac interface.
4. Expect modifications to require manual approval by staff via link on main page.
5. Set syspref "AutoApprovePatronProfileSettings" to "Enable".
6. Edit patron personal details via OPAC interface again.
7. Expect modifications to have been approved automatically.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
This works, we may want some different text for this situation in the OPAC, it still says the librarian has to approve the change.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch combines get_daily_quote and get_daily_quote_for_interface
methods and moves them from Koha::Quote to Koha::Quotes. Also removes
some unused code and adjusts datetime parsing.
To test apply this patch and confirm 'QuoteOfTheDay' syspref still
works as expected (quote is shown in correct mainpage(s)).
Also prove t/db_dependent/Koha/Quotes.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Set 'QuoteOfTheDay'-syspref to 'opac intranet' to allow displaying news in the
opac and the staff client.
Add 'commandline' to allow news in the commandline (where applicable)
Accepts all values accepted by the C4::Context->interface()
Test plan:
1. Set 'QuoteOfTheDay' syspref as 'intranet' or 'opac' or both
2. Check that quote is visible on both mainpages
Prove t/db_dependent/Koha/Quotes.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves subroutine 'GetDailyQuote' to new
Koha::Quote object and adjusts tests.
To test:
1. Set 'QuoteOfTheDay' as 'enable'
2. Check that quote is displayed on OPAC mainpage
Prove t/db_dependent/Koha/GetDailyQuote.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are several calls in catalogue/detail.pl that can be removed:
GetMarcISBN, GetMarcAuthors, GetMarcSubjects, GetMarcSeries, GetMarcUrls and GetMarcHosts
They pass a variable to the template that is never used.
Test plan:
Confirm that this TT variable is never used.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The Google Transliterate API was deprecated on May 26, 2011. This patch
removes the feature and associated system preference.
To test, apply the patch and run the database update process.
- Go to Administration -> System preferences and search for
'GoogleIndicTransliteration.' There should be no results.
- Search the Koha codebase for references to
'GoogleIndicTransliteration.' There should be no current references..
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Output rss feed as text/xml
Test plan:
1) have books entered
2) log in create a list
3) add books to list
4) display list in OPAC
5) click the RSS link button.
-- output is displayed as html text
6) apply patch
7) repeat steps 4&5
-- output is displayed as xml tree
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the following plugin hooks:
- opac_results_xslt_variables
- opac_detail_xslt_variables
This hooks will inject variables returned by the plugin in the form of a
hashref, into the ones that are passed to the XSLT processing code.
To test:
1. Apply the 'DO NOT PUSH' commit
2. Install the Kitchensink plugin
3. Restart all
4. Search biblios in the OPAC
=> SUCCESS: A text is injected in front of the biblio title
5. Enter the detail page of any of the results
=> SUCCESS: A text is injected in front of the biblio title
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If a user to access a CSV profile that is not available at the OPAC we
should redirect to 404.
It will also handle undefined csv_profiles
For instance:
kohadev.mydnsname.org:8080/cgi-bin/koha/opac-downloadshelf.pl?shelfnumber=1&format=3
kohadev.mydnsname.org:8080/cgi-bin/koha/opac-downloadcart.pl?bib_list=1/2/&format=3
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames the introduced attribute for later usage on the API,
and changes the logic to use it the other way around.
It also adds a KEY for the flag, as it will be used in WHERE statements.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Update database
2) Update schema
3) In staff side, go to Tools -> CSV profiles
4) Make a CSV profile with profile type = MARC and usage = Export
records
5) Leave 'Show option in OPAC' unchecked and save
6) Go to OPAC and add an item to your cart
7) Click Cart, click Download, confirm that your newly created CSV
profile does not show as an option
8) Go back and edit CSV profile on staff side
9) Check the 'Show option in OPAC' checkbox and save
10) Go back to download cart in OPAC
11) Confirm the CSV profile now shows in the dropdown
Sponsored-by: Catalyst IT
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: The GetItemsInfo call is now suboptimal. Leaving it as-is
for now in the hope that item refactoring picks it up ;)
Test plan:
Test opac-detail via biblionumber (regular use).
Test opac-detail by passing an itemnumber in the URL:
/cgi-bin/koha/opac-detail?itemnumber=999
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
- Set 1+ patron's attribute(s) mandatory
- Use the self-registration feature and confirm that you cannot selfreg
if the attribute has no value (or empty string)
- Same with the modification form (logged in)
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the "opac_option" parameter from opac-basket.pl. It
was included in Bug 25402 because the bug was dependent on 5087.
To test, apply the patch and add some items to the Cart in the OPAC.
Click the Cart button to show the cart. The pop-up window should load
correctly without errors.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a .perlcriticrc (copied from qa-test-tools) and fixes
almost all perlcrictic violations according to this .perlcriticrc
The remaining violations are silenced out by appending a '## no critic'
to the offending lines. They can still be seen by using the --force
option of perlcritic
This patch also modify t/00-testcritic.t to check all Perl files using
the new .perlcriticrc.
I'm not sure if this test script is still useful as it is now equivalent
to `perlcritic --quiet .` and it looks like it is much slower
(approximatively 5 times slower on my machine)
Test plan:
1. Run `perlcritic --quiet .` from the root directory. It should output
nothing
2. Run `perlcritic --quiet --force .`. It should output 7 errors (6
StringyEval, 1 BarewordFileHandles)
3. Run `TEST_QA=1 prove t/00-testcritic.t`
4. Read the patch. Check that all changes make sense and do not
introduce undesired behaviour
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Patron should be allowed to modify this setting without asking a staff
member.
The setting is not configurable and cannot be hidden via a syspref.
Test plan:
- Turn the pref TranslateNotices on
- Install some languages
- Edit your messaging settings at the OPAC
=> Notice the "Preferred language for notices" dropdown list
- Select one
=> Confirm that the value is saved in DB
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the process of downloading a cart so that it doesn't
involve a separate popup window.
To test, apply the patch and add some titles to the cart in the OPAC.
- Open the cart
- The "Download" button should now be a dropdown menu.
- Selecting any of the download options should trigger a download
prompt.
- Test with and without some CSV profiles which have been configured
for use in the OPAC
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If PatronSelfModificationBorrowerUnwantedField contains dateofbirth, all
patron self modification requests will attempt to set dateofbirth to
null instead of ignoring the field.
Test Plan:
1) Add dateofbirth to PatronSelfModificationBorrowerUnwantedField
2) Run a patron self modification
3) Note the request sets dateofbirth to null on the staff side
4) Apply this patch
5) Restart all the things!
6) Run another self-modification
7) Note of the staff side that dateofbirth is unaffected
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the pref TagsEnabled is off we should not display the tags at the
OPAC.
There is a message to tell that tags system is disabled, but the tags
are displayed.
We should redirect to 404 like we do in opac-topissues.pl and
opac-suggestions.pl.
Test plan:
- Turn TagsEnabled on
- Add some tags
- Turn TagsEnabled off
- Hit /cgi-bin/koha/opac-tags.pl
=> Without this patch you see a warning messaging saying that the tag
system is disabled, but the tags are displayed
=> With this patch you get a 404 redirect
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is no need for all the conditions.
From Encode::encode POD:
"If the $string is undef, then undef is returned."
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The cart was outputing ISO2709 MARC records with Latin-1
encoding. Records containing non-latin1 characters were
automatically re-encoded as UTF-8 by browsers, which led to
inconsistent character encodings for downloaded MARC files.
This patch explicitly encodes ISO2709 MARC characters from
the cart download as UTF-8 encoded bytes, which resolves the problem.
Test Plan:
0) Don't apply patch
1) Create bib record with only ASCII characters
2) Add a ü character to the title
3) Save bib record
4) Download bib record from cart (opac and staff client)
5) Using xxd or some other program, note that the ü is
represented by a FC byte (latin-1 encoded)
6) Apply the patch
7) Download bib record from cart (opac and staff client)
8) Using xxd or some other program, note that the ü is
represented by C3 BC bytes (utf-8 encoded)
9) Success
(Note that you could potentially use Notepad++ or some other
program to open the downloaded file and just note the encoding
that it finds. You could also try "chardetect" instead. Lots
of options for figuring out the encoding.)
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes use of the 'variables' parameter in XSLTParse4Display
method in the different places that it is used in the OPAC. It does by
passing this parameter with
anonymous_session => 1|0
The value will depend on the output from get_template_and_user (i.e. if
there's a returned borrowernumber).
A special case takes place in search results, as the call to
XSLTParse4Display happens in C4::Search::searchResults. So a new
parameter 'xslt_variables' is added to it.
To test:
1. Apply the [DO NOT PUSH] patch
2. Open the OPAC in your browser
3. Try detail pages, search results, tags and lists/shelves pages with
or without an active session
=> FAIL: It always says (somewhere) 'Anonymous session: Yes'
4. Apply this patch, restart_all
5. Repeat 3
=> SUCCESS: It will tell the Yes/No correctly regarding anonymous
sessions!
6. Sign off :-D
Sponsored-by: Universidad ORT Uruguay
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1- View a record with Materials specified (field 3) data in the opac
2- Apply patch
3- Log in to staff client
4- Home->Administration->Column Settings->OPAC->holdingst
5- Set item_materials visibility
6- Refresh OPAC page
7- Confirm that the materials specified column has been added after the
Call number column.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds a script and a template for showing library information
pages in the OPAC. A "libraries" page lists all the libraries in the
system, linking to individual pages for each library showing more
information..
If there is only one library in the system the page shows all of that
library's information.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to /cgi-bin/koha/opac-library.pl in the OPAC.
- Verify that all the correct information is displayed for the
libraries in your system.
- Verify that page title and breadcrumbs look correct.
- Click to view details for a library.
- The details page should show the full contents of
branches.opac_info
- A menu should show links to other libraries' detail pages.
EDIT: This revised patch adds a "Libraries" link to the links under the
search bar; Corrects encoding in the breadcrumb link; Makes the page
title more specific when viewing an individual library.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies the OPAC comments system so that the biblio object
is passed to the template. This allows the biblio-title include to
properly access the title and subtitle information.
Unrelated change: Remove some custom CSS from the page which was
obsolete.
To test, apply the patch and make sure the "reviewson" preference is
enabled.
- Log in to the OPAC and open a bibliographic record's detail page.
- Under the "Comments" tab, click the "Post your comments" link to
trigger the pop-up window.
- In the pop-up window, verify that the item's title is correct in the
page title and the heading. Author should display correctly, if
present.
- Test submitting a comment and editing a comment. Everything should
work correctly.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability for logged-in patrons to add star ratings to
titles in their list of current checkouts and on the reading history
page.
The reading history page previously only showed existing ratings. Now it
will allow the entry of ratings as well.
The JS and markup for the feature are in separate include files to
facilitate re-use. It includes markup for non-js display of ratings and
js-driven ratings controls.
To test, apply the patch and set the OpacStarRatings to all, "results,
details, and user" pages.
- Log in to the OPAC as a user with checkouts.
- On the "your summary" page, test the features of setting star
ratings:
- Any title with existing ratings should show the rating and the
average rating number.
- Set a rating. Confirm that it shows a message with your rating.
- Click the "cancel rating" link, and confirm that your rating is
removed.
- Set a rating and reload the page. Confirm that the rating was
saved.
- Test the "cancel rating" link on the title you set before you
reloaded the page. The rating should be cancelled.
- Test the same functionality on the "your reading history" page.
- Test these pages with the OpacStarRatings preference set to "only
details" or "no." The pages should function correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch cleans opac-showmarc.pl so it doesn't allow retrieving
records from import batches without requiring any permissions in the
OPAC.
it does so by just removing the code portion that does that.
It also cleans the record fetch operation and how the record processor
is initialized to it actually works :-D
To test:
1. Perform a successful Z39.50 search in cataloguing (this fetches 20
records usually)
2. Query your DB for a valid import_record_id:
$ koha-mysql kohadev
> SELECT * FROM import_records LIMIT 1;
3. Notice some of the MARCXML details (title, author, etc), and the
import_record_id
4. Point your browser to the opac-showmarc.pl URL like this:
http://kohadev.mydnsname.org:8080/cgi-bin/koha/opac-showmarc.pl?importid=20
=> FAIL: You get the record! (Bonus: no field/subfield takes place)
5. Hide some obvious subfield on the framework for a known (to you)
biblionumber
6. Point your browser to:
http://kohadev.mydnsname.org:8080/cgi-bin/koha/opac-showmarc.pl?id=<biblionumber_here>
=> FAIL: No filtering takes place
7. Apply this patch
8. Repeat 4
=> SUCCESS: You get an error because you did a bad request (no id param)
9. Repeat 6
=> SUCCESS: Subfield filtering actually works!
10. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1) update database, restart memcached/plack
2) Go to Administration -> System preferences -> OPAC tab. Enable the
new PatronSelfRegistrationConfirmEmail system preference. Enable other
required self registration sysprefs.
3) Go to the OPAC home page. (You may need to log out). Click the
'Register' link so you are redirected to the member entry form.
4) Notice the 'Confirm primary email' field after the 'primary email'
field. Put 'a@a.com' in primary email, and 'b@b.com' in the confirm
field. Scroll to the end of the form and Submit.
5) Confirm the form is not successfully submitted, and an error message
is shown to indicate the email addresses do not match.
6) Confirm you cannot cut, copy or paste in either the primary email or
confirm primary email fields. Confirm the right click menu doesn't work
in these fields.
7) Disable javascript in your browser.
8) Repeat steps 3 and 4.
9) Confirm there is an error message to indicate the email addresses do
not match.
10) Re-enable javascript. Fill in the form correctly with matching email
addresses and confirm it successfully submits.
11) Disable the PatronSelfRegistrationConfirmEmail syspref.
12) Attempt to register an account on the OPAC again. Confirm the
'confirm email address' field is gone and form works as expected.
13) Re-enable the PatronSelfRegistrationConfirmEmail syspref.
14) Log in to the OPAC and go to your personal details
15) Edit the primary email field
16) Confirm you are able to submit your changes (you should not see an
error about emails not matching).
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: holly <hc@interleaf.ie>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Highlight that we only need this for action="new"
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes it so PatronSelfRegistrationLibraryList will only effect the registration from and not the modification form.
TO TEST:
1. Turn on self reg and add some libaries to PatronSelfRegistrationLibraryList.
2. Notice that the libaries that display in the borrower_branchcode dropdown are the ones you selected on both the new registration from and the modification form.
3. Apply patch.
4. Now only the new registration from should show libaries on PatronSelfRegistrationLibraryList.
5. The modifciation dropdown should still show all libraries.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The lack of parenthesis makes the condition evaluated wrong.
Test plan:
- confirm you have a branch with code X
- enter X in PatronSelfRegistrationLibraryList
- go to cgi-bin/koha/opac-memberentry.pl (either as a logged in patron or as a self-reg patron)
- confirm branch dropdown is not empty and contain X
- empty out PatronSelfRegistrationLibraryList
- reload cgi-bin/koha/opac-memberentry.pl and confirm branches show
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
1 - Apply this patch
2 - Run updatedatabase.pl
3 - By default the preferences are blank and do not limit.
4 - Set the limits to 3 in 30 days
5 - Go to purchase suggestion page from OPAC as a logged in patron
6 - Place 3 suggestions and confirm you cannot place any more
7 - Alter one of the suggestions to have been made more than 30 days ago
UPDATE suggestions SET suggesteddate = '2020-01-01' WHERE suggestionid=3;
8 - Confirm you can place another suggestion
9 - Log out of OPAC
10 - Make sure AnonSyggestions is set to 'Allow' and AnonymousPatron is set
11 - Confirm anonymous suggestions are not limited by the syspref
12 - Confirm that a blank value in either MaxTotalSuggestions or NumberOfSuggestionDays does not limit suggestions
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should use Koha::DateUtils instead of Date::Time directly
This patch simplay replaces calls to now() with a call to dt_from_string()
which does effectively the same thing.
Probably reading the code and verifying changes is sufficient but...
To test:
1 - confirm the files all compile
2 - confirm all tests pass
3 - confirm Koha still works
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
